There are many types of disabilities, and each type has a variety related to socioeconomic factors. Such factors affect to many health problems of the disabled. However, surveys of the oral health ...status of the disabled in Korea are rare.
The purpose of this study was to estimate oral health disparity through comparing oral health status of the disabled to the non-disabled, adjusted for the net effect of the disability on oral health status.
A cross-sectional study was conducted among the disabled in urban and suburban areas in Korea from June to September 2016. People with physical, mental, and multiple disabilities took part in this survey. The clinical examinations were carried out by trained dentists. Statistical analysis was performed to quantify the association between oral health and socioeconomic status after restricting the analysis using a propensity score matching method.
The disabled had more DMFT, DT, and MT, fewer FT, and fewer teeth than the non-disabled based on entire groups (P<0.01). No difference in the ratio of periodontitis was observed. The subjects with mental disabilities (MD) scored 3.09 (95% CI, 1.07-8.97), and those with multiple disabilities scored 4.37 (95% CI, 1.16-16.37) for edentulous status. The MD had an odds ratio of 1.34 (95% CI, 1.03-1.74), and those with multiple disabilities had an odds ratio of 1.75 (95% CI, 1.11-2.76) for the DMFT index.
These results represent poor oral health status of the disabled compared to the non-disabled. Consequentially, we can verify that not only the existence of disability but also the type of disability has a decisive effect on oral health condition. This comparison is necessary to widen our approach to evaluate the actual status condition of the disabled.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Gastric cancer is a heterogeneous cancer, making treatment responses difficult to predict. Here we show that we identify two distinct molecular subtypes, mesenchymal phenotype (MP) and epithelial ...phenotype (EP), by analyzing genomic and proteomic data. Molecularly, MP subtype tumors show high genomic integrity characterized by low mutation rates and microsatellite stability, whereas EP subtype tumors show low genomic integrity. Clinically, the MP subtype is associated with markedly poor survival and resistance to standard chemotherapy, whereas the EP subtype is associated with better survival rates and sensitivity to chemotherapy. Integrative analysis shows that signaling pathways driving epithelial-to-mesenchymal transition and insulin-like growth factor 1 (IGF1)/IGF1 receptor (IGF1R) pathway are highly activated in MP subtype tumors. Importantly, MP subtype cancer cells are more sensitive to inhibition of IGF1/IGF1R pathway than EP subtype. Detailed characterization of these two subtypes could identify novel therapeutic targets and useful biomarkers for prognosis and therapy response.
Transarterial chemoembolization (TACE) is a standard treatment for intermediate-stage hepatocellular carcinoma (HCC). In this review, we summarize recent updates on the use of TACE for HCC. TACE can ...be performed using two techniques; conventional TACE (cTACE) and drug-eluting beads using TACE (DEB-TACE). The anti-tumor effect of the two has been reported to be similar; however, DEB-TACE carries a higher risk of hepatic artery and biliary injuries and a relatively lower risk of post-procedural pain than cTACE. TACE can be used for early stage HCC if other curative treatments are not feasible or as a neoadjuvant treatment before liver transplantation. TACE can also be considered for selected patients with limited portal vein thrombosis and preserved liver function. When deciding to repeat TACE, the ART (Assessment for Retreatment with TACE) score and ABCR (AFP, BCLC, Child-Pugh, and Response) score can guide the decision process, and TACE refractoriness needs to be considered. Studies on the combination therapy of TACE with other treatment modalities, such as local ablation, radiation therapy, or systemic therapy, have been actively conducted and are still ongoing. Recently, new prognostic models, including analysis of the neutrophil-lymphocyte ratio, radiomics, and deep learning, have been developed to help predict survival after TACE.
Magnetic skyrmions are swirling magnetic textures with novel characteristics suitable for future spintronic and topological applications. Recent studies confirmed the room-temperature stabilization ...of skyrmions in ultrathin ferromagnets. However, such ferromagnetic skyrmions show an undesirable topological effect, the skyrmion Hall effect, which leads to their current-driven motion towards device edges, where skyrmions could easily be annihilated by topographic defects. Recent theoretical studies have predicted enhanced current-driven behavior for antiferromagnetically exchange-coupled skyrmions. Here we present the stabilization of these skyrmions and their current-driven dynamics in ferrimagnetic GdFeCo films. By utilizing element-specific X-ray imaging, we find that the skyrmions in the Gd and FeCo sublayers are antiferromagnetically exchange-coupled. We further confirm that ferrimagnetic skyrmions can move at a velocity of ~50 m s
with reduced skyrmion Hall angle, |θ
| ~ 20°. Our findings open the door to ferrimagnetic and antiferromagnetic skyrmionics while providing key experimental evidences of recent theoretical studies.
Identifying material parameters affecting properties of ferromagnets is key to optimized materials that are better suited for spintronics. Magnetic anisotropy is of particular importance in van der ...Waals magnets, since it not only influences magnetic and spin transport properties, but also is essential to stabilizing magnetic order in the two-dimensional limit. Here, we report that hole doping effectively modulates the magnetic anisotropy of a van der Waals ferromagnet and explore the physical origin of this effect. Fe3–x GeTe2 nanoflakes show a significant suppression of the magnetic anisotropy with hole doping. Electronic structure measurements and calculations reveal that the chemical potential shift associated with hole doping is responsible for the reduced magnetic anisotropy by decreasing the energy gain from the spin–orbit induced band splitting. Our findings provide an understanding of the intricate connection between electronic structures and magnetic properties in two-dimensional magnets and propose a method to engineer magnetic properties through doping.
Conventional electronic (e‐) skins are a class of thin‐film electronics mainly fabricated in laboratories or factories, which is incapable of rapid and simple customization for personalized ...healthcare. Here a new class of e‐tattoos is introduced that can be directly implemented on the skin by facile one‐step coating with various designs at multi‐scale depending on the purpose of the user without a substrate. An e‐tattoo is realized by attaching Pt‐decorated carbon nanotubes on gallium‐based liquid‐metal particles (CMP) to impose intrinsic electrical conductivity and mechanical durability. Tuning the CMP suspension to have low‐zeta potential, excellent wettability, and high‐vapor pressure enables conformal and intimate assembly of particles directly on the skin in 10 s. Low‐cost, ease of preparation, on‐skin compatibility, and multifunctionality of CMP make it highly suitable for e‐tattoos. Demonstrations of electrical muscle stimulators, photothermal patches, motion artifact‐free electrophysiological sensors, and electrochemical biosensors validate the simplicity, versatility, and reliability of the e‐tattoo‐based approach in biomedical engineering.
A new class of e‐tattoo that can be directly implemented on the skin by rapid one‐step coating with various designs at a multi‐scale for personalized healthcare is introduced. The e‐tattoo is realized by tuning the electrically conductive and mechanically durable liquid metal composite based suspension to have low repulsion between particles, excellent wettability, and high vapor pressure.
The issues over increases in energy demand and environmental pollution attributed to excessive use of fossil fuel have been the driving forces of the exploration for eco-friendly resource. ...Lignocellulosic biomass consisting of carbohydrates and lignin can be a renewable feedstock for replacing fossil fuels in the future because it is a plentiful and carbon neutral material. Especially, lignin, cross-linked phenolic polymers, is a topic of interest owing to its abundant production from pulp/paper industries as well as lignocellulose based biorefinery. The large potential of platform chemicals and biofuels from lignin has opened up an extensive range of opportunities to develop thermal and catalytic conversion technology. Over a few decades, several lignin conversion processes including catalytic pyrolysis, catalytic depolymerization, and catalytic oxidation have been developed to improve target products yields and to suppress side reactions. More recently, lignin-first approaches which maintain carbohydrates intact by selective extraction of lignin as valuable phenolics from whole biomass has been suggested. This review introduces recent ten years progress on thermal and catalytic conversion technology in terms of process type, catalyst development, and target products. This review is expected to offer an influential information for future research into the thermal and catalytic conversion of lignin as well as lignocellulosic feedstock.
•Recent discoveries in thermal and catalytic lignin conversion are introduced.•A proper conversion process should be considered depending on the lignin type.•Catalyst plays a decisive role in product distribution and selectivity in process.•The challenges and future perspective of each process is discussed.
Display omitted
•Recent discoveries in solvent liquefaction of lignocellulose are introduced.•Biofuels, antioxidant, bio-polyols, and chemicals were produced from lignocellulose.•A plausible ...degradation pathway of each biomass component is suggested.•The challenges and future perspective of solvent liquefaction process is discussed.
The concerns over the increasing energy demand and cost as well as environmental problems derived from fossil fuel use are the main driving forces of research into renewable energy. Lignocellulosic biomass comprised of cellulose, hemicellulose, and lignin is an abundant, carbon neutral, and alternative resource for replacing fossil fuels in the future. Solvent liquefaction of lignocellulosic biomass is a promising route to obtain biofuels, bio-based materials, and chemicals using a range of solvents as reaction media under moderate reaction conditions. Recently, several researchers have considered novel approaches for enhancing the process efficiency and economics.
This review article reports the state-of-the-art knowledge of lignocellulose liquefaction in the recent three years with the main focus on the feedstock, liquefaction technology, target products, and degradation mechanism of each biomass component. This review is expected to provide an important reference for research into the solvent liquefaction of lignocellulose in the near future.
Direct chemical vapor deposition (CVD) growth of single‐layer graphene on CVD‐grown hexagonal boron nitride (h‐BN) film can suggest a large‐scale and high‐quality graphene/h‐BN film hybrid structure ...with a defect‐free interface. This sequentially grown graphene/h‐BN film shows better electronic properties than that of graphene/SiO2 or graphene transferred on h‐BN film, and suggests a new promising template for graphene device fabrication.
ZnO-based ultraviolet (UV) photodetector can be easily fabricated by using sol-gel spin-coating method, however, the crystallization of amorphous state ZnO thin films is necessary to fabricate high ...performance UV photodetector. Thus, we devised a thermal dissipation annealing (TDA) method in which the heat transfer to the ZnO thin films can be synchronized with the heat release from the substrate. It was found that sol-gel spin-coated ZnO thin films can be crystallized through the mobility difference of ZnO molecules placed at the surface of ZnO thin films. Also, UV photodetector based on ZnO thin films annealed with the TDA method exhibited faster rise and decay time constant (τ
= 35 ms and τ
= 73 ms, respectively), a higher on/off current ratio, and reproducible photocurrent characteristics compared to that of the ZnO thin films annealed by using furnace and IR lamp. Therefore, these results indicated that the TDA method is a feasible alternative route for the fabrication of ZnO based high performance optoelectronic devices.
PDF
