Grains exiting an underwater silo exhibit an unexpected surge in discharge rate as they empty. This contrasts with the constant flow rate of dry granular hoppers and the decreasing flow rate of pure ...liquids. Here we find that this surge depends on hopper diameter and happens also in air. The surge can be turned off by fixing the rate of fluid flow through the granular packing. With no flow control, dye injected on top of the packing gets drawn into the grains. We conclude that the surge is caused by a self-generated pumping of fluid through the packing. The effect is modelled via a driving pressure set by the exit speed of the grains. This highlights a surprising and unrecognized role that interstitial fluid plays in setting the discharge rate, and perhaps in controlling clog formation, for granular hoppers whether in air or under water.
To evaluate fetal doses from extremity CBCT examinations at different stages of pregnancy and to investigate different methods of fetal dose optimization.
Fetal doses were measured in an ...anthropomorphic phantom for two CBCT examination protocols – knee and elbow. The measurements were made at three different heights representing the three trimesters during pregnancy and three different depths in the phantom. The effect of soft tissue layer, tube voltage, add-on device shield and body angulation on fetal dose were investigated.
The fetal doses in clinical examination protocols were in the range of 3.4 to 6.0 µGy during knee examinations and 2.9 to 7.7 µGy during elbow examinations depending on the depth of the fetus and the stage of pregnancy. A soft tissue layer representing variative body composition above abdomen region decreased the fetal dose up to 19 % in knee and up to 21 % in elbow examinations. Using lower tube voltage decreased the fetal doses up to 45 % (knee) and 51 % (elbow). An add-on device shield decreased the fetal doses up to 91 % (knee) and up to 75 % (elbow). Turning the body away from the device bore reduced the fetal doses up to 62 %. The conversion factor to convert an entrance surface dose to the fetal dose ranged from 0.4 to 0.6.
The fetal doses from CBCT examinations of extremities are low and do not produce a concern about radiation detriment to the fetus. The most efficient way found to reduce the fetal dose was to use the add-on device shielding.
Mimicking natural structures allows the exploitation of proven design concepts for advanced material solutions. Here, our inspiration comes from the anisotropic closed cell structure of wood. The ...bubbles in our fiber reinforced foam are elongated using temperature dependent viscosity of methylcellulose and constricted drying. The oriented structures lead to high yield stress in the primary direction; 64 times larger than compared to the cross direction. The closed cells of the foam also result in excellent thermal insulation. The proposed novel foam manufacturing process is trivial to up-scale from the laboratory trial scale towards production volumes on industrial scales.
Abstract
Background
There is a need for better adoption of technology to meet the needs of home care professionals, older people, and informal caregivers.
Methods
Mixed methods were used to describe ...and analyse quantitative and qualitative data in a Finnish governmental programme called KATI. The study was three-fold: it 1) listed what kinds of technologies were piloted and deployed in a national study, 2) provided information from the perspectives of home care professionals about requirements to use technology by using focus-group interviews, and 3) assessed experiences of how the adoption of technology changes work and work processes over time by using repeated surveys. Informants in interviews (
n
= 25) and surveys (
n
= 90) were home care professionals, who also described the perspectives of older people and informal caregivers. The conceptual models framing the study were adapted from the Technology Acceptance Model and DirVA PROVE-IT.
Results
There were 80 technology pilots, in which variety of technologies were followed in home care. Familiarity with, commitment to and understanding of technology benefits were considered to be requirements for the technology to be used. The adoption of technology provided new skills and information about older people’s wellbeing, realisation of treatment and new possibilities in home care. It developed new procedures to focus on older people’s needs and motivated professionals by gained concrete aid. It enabled them to leave out some concrete procedures as unnecessary. On the other hand, there were also pessimistic and negative experiences when technology use provided nothing new or did not change anything.
Conclusions
The adoption of technology is dependent on the technology and its integration into the prevailing service practice. When they both work, it is possible to leave out unnecessary procedures in care, allocate resources and save time. It is possible to be aware of older people’s safety and how they cope at home, find new ways to get involved in older people’s lives, gain insight, and make changes at work. Continuous on-site training, modifications in service practices and communication throughout organisations is needed.
Celotno besedilo
Dostopno za:
CEKLJ, DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Although the COVID-19 pandemic has significantly boosted the implementation of digital services worldwide, it has become increasingly important to understand how these solutions are integrated into ...professionals' routine work. Professionals who are using the services are key influencers in the success of implementations. To ensure successful implementations, it is important to understand the multiprofessional perspective, especially because implementations are likely to increase even more.
The aim of this study is to examine health and social care professionals' experiences of digital service implementations and to identify factors that support successful implementations and should be considered in the future to ensure that the services are integrated into professionals' routine work.
A qualitative approach was used, in which 8 focus group interviews were conducted with 30 health and social care professionals from 4 different health centers in Finland. Data were analyzed using qualitative content analysis. The resulting categories were organized under the components of normalization process theory.
Our results suggested 14 practices that should be considered when implementing new digital services into routine work. To get professionals to understand and make sense of the new service, (1) the communication related to the implementation should be comprehensive and continuous and (2) the implementation process should be consistent. (3) A justification for the service being implemented should also be given. The best way to engage the professionals with the service is (4) to give them opportunities to influence and (5) to make sure that they have a positive attitude toward the service. To enact the new service into professionals' routine work, it is important that (6) the organization take a supportive approach by providing support from several easy and efficient sources. The professionals should also have (7) enough time to become familiar with the service, and they should have (8) enough know-how about the service. The training should be (9) targeted individually according to skills and work tasks, and (10) it should be diverse. The impact of the implementation on the professionals' work should be evaluated. The service (11) should be easy to use, and (12) usage monitoring should happen. An opportunity (13) to give feedback on the service should also be offered. Moreover, (14) the service should support professionals' work tasks.
We introduce 14 practices for organizations and service providers on how to ensure sustainable implementation of new digital services and the smooth integration into routine work. It is important to pay more attention to comprehensive and continuing communication. Organizations should conduct a competence assessment before training in order to ensure proper alignment. Follow-ups to the implementation process should be performed to guarantee sustainability of the service. Our findings from a forerunner country of digitalization can be useful for countries that are beginning their service digitalization or further developing their digital services.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, UILJ, UKNU, UL, UM, UPUK
Today, digitalisation is strongly present in health and social care, and it increasingly affects the organisation of work, work requirements, tasks and tools. Due to the constant change in work, ...up-to-date knowledge is needed about these micro-level effects of digitalisation and how professionals experience the effects in their work. Furthermore, even though managers play a key role in implementing new digital services, their perceptions of the effects of digitalisation and whether they match the views of professionals remain unknown. This study examined how health and social care professionals and managers perceive the effects of digitalisation on the work of professionals.
We used a qualitative approach and conducted eight semi-structured focus group interviews with health and social care professionals (n = 30) and 21 individual interviews with managers in 2020 in four health centres in Finland. The qualitative content analysis included both an inductive and a deductive approach.
Digitalisation was perceived to have changed professionals' 1) workload and pace, 2) the field and nature of work, 3) work community communication and interaction, and 4) information flow and security. Both professionals and managers identified effects such as accelerated work, reduction in workload, constant learning of technical skills, complicated work due to vulnerable information systems, and reduction in face-to-face encounters. However, managers did not bring up all the effects that professionals considered important, such as the creation of new work tasks, increased and duplicated work, or insufficient time to get acquainted with the systems.
The findings suggest that some of the effects of digitalisation on professionals' work and changes in the workplace may receive too little or no recognition from managers. This increases the risk that the potential negative effects may be overlooked and that managers will adopt systems that do not support the work of professionals. To reach a common understanding of the effects of digitalisation, continuous discussions between employees and different management levels are required. This contributes to professionals' well-being and adaptation to changes, as well as the provision of quality health and social services.
Celotno besedilo
Dostopno za:
CEKLJ, DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Objective:
Cone beam computed tomography (CBCT) images are being increasingly used to acquire three-dimensional (3D) models of the skull for additive manufacturing purposes. However, the accuracy of ...such models remains a challenge, especially in the orbital area. The aim of this study is to assess the impact of four different CBCT imaging positions on the accuracy of the resulting 3D models in the orbital area.
Methods:
An anthropomorphic head phantom was manufactured by submerging a dry human skull in silicon to mimic the soft tissue attenuation and scattering properties of the human head. The phantom was scanned on a ProMax 3D MAX CBCT scanner using 90 and 120 kV for four different field of view positions: standard; elevated; backwards tilted; and forward tilted. All CBCT images were subsequently converted into 3D models and geometrically compared with a “gold-standard” optical scan of the dry skull.
Results:
Mean absolute deviations of the 3D models ranged between 0.15 ± 0.11 mm and 0.56 ± 0.28 mm. The elevated imaging position in combination with 120 kV tube voltage resulted in an improved representation of the orbital walls in the resulting 3D model without compromising the accuracy.
Conclusions:
Head positioning during CBCT imaging can influence the accuracy of the resulting 3D model. The accuracy of such models may be improved by positioning the region of interest (e.g. the orbital area) in the focal plane ( Figure 2a ) of the CBCT X-ray beam.
Objectives
To highlight the detail obtained on a Cone Beam Computed Tomography (CBCT) scan of the craniocervical junction and its usefulness to Chiropractors who specialize in the upper cervical ...spine. A review of the dose considerations to patients vs radiography in a chiropractic clinical setting and to review the effective radiation dose to the patient.
Methods
A review of studies discussing cervical biomechanics, neurovascular structures, and abnormal radiographic findings, was discussed in relation to chiropractic clinical relevance. Further studies were evaluated demonstrating radiation dose to the patient from radiographs compared to CBCT.
Results
Incidental and abnormal findings of the craniocervical junction were shown to have superior visualization with CBCT compared to radiography. The radiation dose to the patient for similar imaging protocols to the craniocervical junction and cervical spine was equal or less utilizing CBCT when compared to radiographs.
Conclusions
The use of CBCT for visualization of the craniocervical junction and cervical spine in the chiropractic clinical setting allows for adjunctive visualization of the osseous structures which is germane to clinical protocol. Further with CBCT the effective dose to the patient is equal or less than similar imaging protocols utilizing radiographs to evaluate the craniocervical junction.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, UILJ, UKNU, UL, UM, UPUK
IntroductionThis paper analyses and discusses the models and tools in the Finnish health and social care system to identify the individuals who might benefit from integrated multidisciplinary care. ...DescriptionThe analysis and discussion of the paper is based on a study which mapped and studied the models and tools in practice or under development for identification in the Finnish health and social care organizations. The study used electric survey and structured interviews as research methods. DiscussionThere are several different established models of identification in Finland and the experiences of using them are mainly positive. However, only every third of health and social care organizations in Finland have defined a common model or tool. The identification practices and criteria vary by region, municipality and/or organization. The identification is in general unsystematic and insufficient in practice that may inhibit the individuals to access the integrated care they might benefit from. ConclusionsModels and tools are needed for founding and identifying individuals who are outside the service system, those whose client-ship has just begun, and those who already access services. The identification of individuals for integrated multidisciplinary care and the assimilation and understanding of different identification models and tools requires the development of basic and further competence in the different fields of health and social care. Multidisciplinary collaboration requires shared concepts and positive attitudes on the development of integrated professional environments, identification models and services. It is therefore also a question of shared working culture.
Musical competence may confer cognitive advantages that extend beyond processing of familiar musical sounds. Behavioural evidence indicates a general enhancement of both working memory and attention ...in musicians. It is possible that musicians, due to their training, are better able to maintain focus on task-relevant stimuli, a skill which is crucial to working memory. We measured the blood oxygenation-level dependent (BOLD) activation signal in musicians and non-musicians during working memory of musical sounds to determine the relation among performance, musical competence and generally enhanced cognition. All participants easily distinguished the stimuli. We tested the hypothesis that musicians nonetheless would perform better, and that differential brain activity would mainly be present in cortical areas involved in cognitive control such as the lateral prefrontal cortex. The musicians performed better as reflected in reaction times and error rates. Musicians also had larger BOLD responses than non-musicians in neuronal networks that sustain attention and cognitive control, including regions of the lateral prefrontal cortex, lateral parietal cortex, insula, and putamen in the right hemisphere, and bilaterally in the posterior dorsal prefrontal cortex and anterior cingulate gyrus. The relationship between the task performance and the magnitude of the BOLD response was more positive in musicians than in non-musicians, particularly during the most difficult working memory task. The results confirm previous findings that neural activity increases during enhanced working memory performance. The results also suggest that superior working memory task performance in musicians rely on an enhanced ability to exert sustained cognitive control. This cognitive benefit in musicians may be a consequence of focused musical training.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK