Claudins are major integral membrane proteins of tight junctions. Altered expression of several claudin proteins, in particular claudin-1, -3, -4 and -7, has been linked to the development of various ...cancers. Although their dysregulation in cancer suggests that claudins play a role in tumorigenesis, the exact underlying mechanism remains unclear. The involvement of claudins in tumor progression was suggested by their important role in the migration, invasion and metastasis of cancer cells in a tissue-dependent manner. Recent studies have shown that they play a role in epithelial to mesenchymal transition (EMT), the formation of cancer stem cells or tumor-initiating cells (CSCs/TICs), and chemoresistance, suggesting that claudins are promising targets for the treatment of chemoresistant and recurrent tumors. A recently identified claudin-low breast cancer subtype that is characterized by the enrichment of EMT and stem cell-like features is significantly associated with disease recurrence, underscoring the importance of claudins as predictors of tumor recurrence. The critical role of epigenetic mechanisms in the regulation of claudin expression indicates the possible application of epigenetic therapy to target claudins. A better understanding of the emerging role of claudins in CSC/TICs and chemoresistance may help to develop therapies against recurrent cancers.
3D bioprinting is a promising approach for the repair of cartilage tissue after damage due to injury or disease; however, the design of 3D printed scaffolds has been limited by the availability of ...bioinks with requisite printability, cytocompatibility, and bioactivity. To address this, we developed an approach termed in situ crosslinking that permits the printing of non-viscous, photocrosslinkable bioinks via the direct-curing of the bioink with light through a photopermeable capillary prior to deposition. Using a norbornene-modified hyaluronic acid (NorHA) macromer as a representative bioink and our understanding of thiol-ene curing kinetics with visible light, we varied the printing parameters (e.g., capillary length, flow rate, light intensity) to identify printing conditions that were optimal for the ink. The printing process was cytocompatible, with high cell viability and homogenous distribution of mesenchymal stromal cells (MSCs) observed throughout printed constructs. Over 56 days of culture in chondrogenic media, printed constructs increased in compressive moduli, biochemical content (i.e., sulfated glycosaminoglycans, collagen), and histological staining of matrix associated with cartilage tissue. This generalizable printing approach may be used towards the repair of focal defects in articular cartilage or broadly towards widespread biomedical applications across a range of photocrosslinkable bioinks that can now be printed.
Hyaluronic acid (HA) is a linear polysaccharide of d-glucuronic acid and N-acetyl-d-glucosamine that is native to many tissues and interacts with cells via cell-surface receptors (e.g., CD44). HA has ...been extensively explored as a chemically-modified macromer for crosslinking into biomaterials, such as hydrogels and macroporous scaffolds. However, the influence of the extent and type of HA modification on its binding to CD44 is not well understood or quantified. To address this, we modified HA at either the carboxylic acid or the primary alcohol with various chemical groups (e.g., norbornenes, methacrylates) and magnitudes (~10, 20, or 40% of disaccharides) and then characterized binding in both soluble and hydrogel forms. HA binding to CD44 immobilized on plates or presented by cells was influenced by the extent and type of its modification, where increased modification (i.e., ~40%) generally decreased binding. The adhesion of CD44-modified beads to hydrogels as measured by atomic force microscopy revealed a similar trend, particularly with decreased adhesion with hydrophobic modifications to the carboxylic acid. Further, the chondrogenesis of mesenchymal stromal cells when encapsulated in hydrogels fabricated from modified HA macromers was reduced at high modification, behaving similarly to inert hydrogel controls. This work suggests that the types and extents of modification of polysaccharides are important factors that should be considered in preserving their biological function when processed as hydrogels.
3D microenvironmental parameters control cell behavior, but can be challenging to investigate over a wide range of conditions. Here, a combinatorial hydrogel platform is developed that uses ...light-mediated thiol-norbornene chemistry to encapsulate cells within hydrogels with biochemical gradients made by spatially varied light exposure. Specifically, mesenchymal stem cells are photoencapsulated in norbornene-modified hyaluronic acid hydrogels functionalized with gradients (0-5 mM) of peptides that mimic cell-cell or cell-matrix interactions, either as single or orthogonal gradients. Chondrogenesis varied spatially in these hydrogels based on the local biochemical formulation, as indicated by Sox9 and aggrecan expression levels. From 100 combinations investigated, discrete hydrogels are formulated and early gene expression and long-term cartilage-specific matrix production are assayed and found to be consistent with screening predictions. This platform is a scalable, high-throughput technique that enables the screening of the effects of multiple biochemical signals on 3D cell behavior.
Consensus ranking of protein affinity to identify point mutations has not been established. Therefore, analytical techniques that can detect subtle variations without interfering with native ...biomolecular interactions are required. Here we report a rapid method to identify point mutations by a single nanoparticle sensing system. DNA-directed gold crystallization forms rod-like nanoparticles with bridges based on structural design. The nanoparticles enhance Rayleigh light scattering, achieving high refractive-index sensitivity, and enable the system to monitor even a small number of protein-DNA binding events without interference. Analysis of the binding affinity can compile an atlas to distinguish the potential of various point mutations recognized by MutS protein. We use the atlas to analyze the presence and type of single point mutations in BRCA1 from samples of human breast and ovarian cancer cell lines. The strategy of synthesis-by-design of plasmonic nanoparticles for sensors enables direct identification of subtle biomolecular binding distortions and genetic alterations.
Various doped materials have been investigated to improve the structural stability of layered transition metal oxides for lithium‐ion batteries. Most doped materials are obtained through solid state ...methods, in which the doping of cations is not strictly site selective. This paper demonstrates, for the first time, an in situ electrochemical site‐selective doping process that selectively substitutes Li+ at Li sites in Mn‐rich layered oxides with Mg2+. Mg2+ cations are electrochemically intercalated into Li sites in delithiated Mn‐rich layered oxides, resulting in the formation of Li1−xMgyMn1−zMzO2 (M = Co and Ni). This Mg2+ intercalation is irreversible, leading to the favorable doping of Mg2+ at the Li sites. More interestingly, the amount of intercalated Mg2+ dopants increases with the increasing amount of Mn in Li1−xMn1−zMzO2, which is attributed to the fact that the Mn‐to‐O electron transfer enhances the attractive interaction between Mg2+ dopants and electronegative Oδ− atoms. Moreover, Mg2+ at the Li sites in layered oxides suppresses cation mixing during cycling, resulting in markedly improved capacity retention over 200 cycles. The first‐principle calculations further clarify the role of Mg2+ in reduced cation mixing during cycling. The new concept of in situ electrochemical doping provides a new avenue for the development of various selectively doped materials.
An in situ electrochemical site‐selective doping method selectively substitutes Li+ at Li sites in Mn‐rich layered oxides with Mg2+. Mg2+ is electrochemically and irreversibly intercalated into Li sites in delithiated Mn‐rich layered oxides, resulting in the formation of Mg2+‐doped layered oxides. The Mg2+ intercalation into the layered oxides strongly depends on the amount of Mn in the layered oxides.
Parental care is essential for the survival of mammals, yet the mechanisms underlying its evolution remain largely unknown. Here we show that two sister species of mice, Peromyscus polionotus and ...Peromyscus maniculatus, have large and heritable differences in parental behaviour. Using quantitative genetics, we identify 12 genomic regions that affect parental care, 8 of which have sex-specific effects, suggesting that parental care can evolve independently in males and females. Furthermore, some regions affect parental care broadly, whereas others affect specific behaviours, such as nest building. Of the genes linked to differences in nest-building behaviour, vasopressin is differentially expressed in the hypothalamus of the two species, with increased levels associated with less nest building. Using pharmacology in Peromyscus and chemogenetics in Mus, we show that vasopressin inhibits nest building but not other parental behaviours. Together, our results indicate that variation in an ancient neuropeptide contributes to interspecific differences in parental care.
Although approximately 100 deubiquitinating enzymes (DUBs) are encoded in the human genome, very little is known about the DUBs that function in mitosis. Here, we demonstrate that DUB USP35 functions ...as a mitotic regulator by controlling the protein levels and downstream signaling of Aurora B and the depletion of USP35 eventually leads to several mitotic defects including cytokinesis failures. USP35 binds to and deubiquitinates Aurora B, and inhibits the APC
-mediated proteasomal degradation of Aurora B, thus maintaining its steady-state levels during mitosis. In addition, the loss of USP35 decreases the phosphorylation of histone H3-Ser10, an Aurora B substrate. Finally, the transcription factor FoxM1 promotes the expression of USP35, as well as that of Aurora B, during the cell cycle. Our findings suggest that USP35 regulates the stability and function of Aurora B by blocking APC
-induced proteasomal degradation, thereby controlling mitotic progression.
Display omitted
3D bioprinting is an attractive technique to fabricate well-organized, cell-laden constructs for tissue repair and disease modeling. Although numerous hydrogel bioinks have been ...developed, materials are still needed that mimic the cellular microenvironment, have the appropriate viscosity and stabilization for printing, and are cytocompatible. Here, we present a unique gallol-modified extracellular matrix (ECM) hydrogel ink that is inspired by rapid fruit browning phenomena. The gallol-modification of ECM components (e.g., hyaluronic acid, gelatin) allowed (i) immediate gelation and shear-thinning properties by dynamic hydrogen bonds on short time-scales and (ii) further auto-oxidation and covalent crosslinking for stabilization on longer time-scales. The gallol ECM hydrogel ink was printable using an extrusion-based 3D printer by exploiting temporal shear-thinning properties, and further showed cytocompatibility (∼95% viability) and on-tissue printability due to adhesiveness of gallol moieties. Printed cell-laden filaments degraded and swelled with culture over 6 days, corresponding to increases in cell density and spreading. Ultimately, this strategy is useful for designing hydrogel inks with tunable properties for 3D bioprinting.
3D bioprinting is a promising technique for the fabrication of cell-laden constructs for applications as in vitro models or for therapeutic applications. Despite the previous development of numerous hydrogel bioinks, there still remain challenging considerations in the design of bioinks. In this study, we present a unique cytocompatible hydrogel ink with gallol modification that is inspired by rapid fruit browning phenomena. The gallol hydrogel ink has three important properties: i) it shows immediate gelation by dynamic, reversible bonds for shear-thinning extrusion, ii) it allows spontaneous stabilization by subsequent covalent crosslinking after printing, and iii) it is printable on tissues by adhesive properties of gallol moieties. As such, this work presents a new approach in the design of hydrogel inks.
Time to unwind: Graphene oxide (GO) enables the quantitative measurement of helicase‐dependent double‐stranded DNA (dsDNA) unwinding activity in real time. GO selectively binds to unwound ...fluorescent‐dye‐labeled single‐stranded DNA and quenches its fluorescence (see picture). The helicase activity is monitored by following the change in fluorescence.