Chemical products are ubiquitous in modern society. The chemical sector is the largest industrial energy consumer and the third largest industrial emitter of carbon dioxide. The current portfolio of ...mitigation options for the chemical sector emphasizes upstream “supply side” solutions, whereas downstream mitigation options, such as material efficiency, are given comparatively short shrift. Key reasons for this are the scarcity of data on the sector’s material flows, and the highly intertwined nature of its complex supply chains. We provide the most up to date, comprehensive and transparent data set available publicly, on virgin production routes in the chemical sector: from fossil fuel feedstocks to chemical products. We map global mass flows for the year 2013 through a complex network of transformation processes, and by taking account of secondary reactants and by-products, we maintain a full mass balance throughout. The resulting data set partially addresses the dearth of publicly available information on the chemical sector’s supply chain, and can be used to prioritise downstream mitigation options.
Modern gas turbines rely on ceramic coatings to protect structural components along the hot gas path. These coatings are susceptible to accelerated degradation caused by silicate deposits formed when ...ingested environmental debris (dust, sand, ash) adheres to the coatings. This article reviews the current understanding of the deposit-induced failure mechanisms for zirconia-based thermal barrier coatings and silicate environmental barrier coatings. Details of the debris melting and crystallization behavior, the nature of the chemical reactions occurring between the deposits and coatings, and the implications for the thermocyclic durability of the coatings are described. Given the challenges posed in understanding how prospective coating materials and architectures will respond to a broad range of deposit compositions, it is proposed to develop an integrated framework linking thermochemical and thermomechanical models to predict coating durability. Initial progress toward developing this framework, and the requisite research needs, are discussed.
Why do individuals defect from the partisan pull of their social identities? Previous explanations of social sorting often neglect to account for these defectors whose partisanship cannot be ...explained by simply tallying up their social identities. I call these individuals political heretics. To better understand this phenomenon, I leverage white evangelicals, one of the most socially and politically sorted groups in the United States, who support the Democratic Party as a case study. I find that, based upon 68 face-to-face interviews across seven churches, two explanations emerge that explain their heresy. First, some find their way into Democratic congregations that shield them from the pressure exerted by residing in a religious tradition that has undergone extensive political sorting. Second, some choose to remain in predominately Republicans churches and offset the cost of this political pressure with some other benefit. However, for those who choose the latter, electing to remain in a church where they are in the political minority, they face significant headwinds to either update their political preferences or leave. Despite these embattled defectors choosing to remain in Republican congregations, the pressure of polarization may eventually force them out.
The relative ease, speed, and biological scope of clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated Protein9 (Cas9)-based reagents for genomic manipulations are ...revolutionizing virtually all areas of molecular biosciences, including functional genomics, genetics, applied biomedical research, and agricultural biotechnology. In plant systems, however, a number of hurdles currently exist that limit this technology from reaching its full potential. For example, significant plant molecular biology expertise and effort is still required to generate functional expression constructs that allow simultaneous editing, and especially transcriptional regulation, of multiple different genomic loci or multiplexing, which is a significant advantage of CRISPR/Cas9 versus other genome-editing systems. To streamline and facilitate rapid and wide-scale use of CRISPR/Cas9-based technologies for plant research, we developed and implemented a comprehensive molecular toolbox for multifaceted CRISPR/Cas9 applications in plants. This toolbox provides researchers with a protocol and reagents to quickly and efficiently assemble functional CRISPR/Cas9 transfer DNA constructs for monocots and dicots using Golden Gate and Gateway cloning methods. It comes with a full suite of capabilities, including multiplexed gene editing and transcriptional activation or repression of plant endogenous genes. We report the functionality and effectiveness of this toolbox in model plants such as tobacco (Nicotiana benthamiana), Arabidopsis (Arabidopsis thaliana), and rice (Oryza sativa), demonstrating its utility for basic and applied plant research.
Key message
The first report presenting successful and efficient carrot genome editing using CRISPR/Cas9 system.
Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)/CRISPR-associated ...(Cas9) is a powerful genome editing tool that has been widely adopted in model organisms recently, but has not been used in carrot—a model species for in vitro culture studies and an important health-promoting crop grown worldwide. In this study, for the first time, we report application of the CRISPR/Cas9 system for efficient targeted mutagenesis of the carrot genome. Multiplexing CRISPR/Cas9 vectors expressing two single-guide RNA (gRNAs) targeting the carrot flavanone-3-hydroxylase (
F3H
) gene were tested for blockage of the anthocyanin biosynthesis in a model purple-colored callus using
Agrobacterium
-mediated genetic transformation. This approach allowed fast and visual comparison of three codon-optimized Cas9 genes and revealed that the most efficient one in generating
F3H
mutants was the
Arabidopsis
codon-optimized AteCas9 gene with up to 90% efficiency. Knockout of
F3H
gene resulted in the discoloration of calli, validating the functional role of this gene in the anthocyanin biosynthesis in carrot as well as providing a visual marker for screening successfully edited events. Most resulting mutations were small Indels, but long chromosome fragment deletions of 116–119 nt were also generated with simultaneous cleavage mediated by two gRNAs. The results demonstrate successful site-directed mutagenesis in carrot with CRISPR/Cas9 and the usefulness of a model callus culture to validate genome editing systems. Given that the carrot genome has been sequenced recently, our timely study sheds light on the promising application of genome editing tools for boosting basic and translational research in this important vegetable crop.
The use of low-cost air quality sensors has proliferated among non-profits and citizen scientists, due to their portability, affordability, and ease of use. Researchers are examining the sensors for ...their potential use in a wide range of applications, including the examination of the spatial and temporal variability of particulate matter (PM). However, few studies have quantified the performance (e.g., accuracy, precision, and reliability) of the sensors under real-world conditions. This study examined the performance of two models of PM sensors, the AirBeam and the Alphasense Optical Particle Counter (OPC-N2), over a 12-week period in the Cuyama Valley of California, where PM concentrations are impacted by wind-blown dust events and regional transport. The sensor measurements were compared with observations from two well-characterized instruments: the GRIMM 11-R optical particle counter, and the Met One beta attenuation monitor (BAM). Both sensor models demonstrated a high degree of collocated precision (R² = 0.8-0.99), and a moderate degree of correlation against the reference instruments (R² = 0.6-0.76). Sensor measurements were influenced by the meteorological environment and the aerosol size distribution. Quantifying the performance of sensors in real-world conditions is a requisite step to ensuring that sensors will be used in ways commensurate with their data quality.
Eight atmospheric general circulation models (AGCMs) are forced with observed historical (1871–2010) monthly sea surface temperature and sea ice variations using the Atmospheric Model Intercomparison ...Project II data set. The AGCMs therefore have a similar temperature pattern and trend to that of observed historical climate change. The AGCMs simulate a spread in climate feedback similar to that seen in coupled simulations of the response to CO2 quadrupling. However, the feedbacks are robustly more stabilizing and the effective climate sensitivity (EffCS) smaller. This is due to a pattern effect, whereby the pattern of observed historical sea surface temperature change gives rise to more negative cloud and longwave clear‐sky feedbacks. Assuming the patterns of long‐term temperature change simulated by models, and the radiative response to them, are credible; this implies that existing constraints on EffCS from historical energy budget variations give values that are too low and overly constrained, particularly at the upper end. For example, the pattern effect increases the long‐term Otto et al. (2013, https://doi.org/10.1038/ngeo1836) EffCS median and 5–95% confidence interval from 1.9 K (0.9–5.0 K) to 3.2 K (1.5–8.1 K).
Plain Language Summary
Recent decades have seen cooling over the eastern tropical Pacific and Southern Oceans while temperatures rise globally. Climate models indicate that these regional features, and others, are not expected to continue into the future under sustained forcing from atmospheric carbon dioxide increases. This matters because climate sensitivity depends on the pattern of warming, so if the past has warmed differently from what we expect in the future, then climate sensitivity estimated from the historical record may not apply to the future. We investigate this with a suite of climate models and show that climate sensitivity simulated for observed historical climate change is smaller than for long‐term carbon dioxide increases. The results imply that historical energy budget changes only weakly constrain climate sensitivity.
Key Points
Climate sensitivity simulated for observed surface temperature change is smaller than for long‐term carbon dioxide increases
Observed historical energy budget constraints give climate sensitivity values that are too low and overly constrained, particularly at the upper end
Historical energy budget changes only weakly constrain climate sensitivity
This work explores the impact of rotation on tropical convection and climate. As our starting point, we use the RCEMIP experiments as control simulations and run additional simulations with rotation. ...Compared to radiative convective equilibrium (RCE) experiments, rotating RCE (RRCE) experiments have a more stable and humid atmosphere with higher precipitation rates. The intensity of the overturning circulation decreases, water vapor is cycled through the troposphere at a slower rate, the subsidence fraction decreases, and the climate sensitivity increases. Several of these changes can be attributed to an increased flux of latent and sensible heat that results from an increase of near‐surface wind speed with rotation shortly after model initialization. The increased climate sensitivity results from changes of both the longwave cloud radiative effect and the longwave clear‐sky radiative fluxes. This work demonstrates the sensitivity of atmospheric humidity and surface fluxes of moisture and temperature to rotation.
Plain Language Summary
Many useful studies of the tropical regions of Earth have neglected to include rotation; however, phenomena such as tropical cyclones and atmospheric waves are fundamentally tied to rotation. This work compares models of the tropics with and without rotation. Compared to experiments without rotation, rotating experiments have a more humid and stable atmosphere. Although water vapor is cycled through the atmosphere at a slower rate, the precipitation rate increases. The climate sensitivity also increases due to changes in both clouds and water vapor. Many of these changes are the result of increased wind speeds. We argue that idealized modeling of Earth's tropical regions should include not just stationary experiments but also experiments that include rotation.
Key Points
Rotation leads to a decreased intensity of the overturning circulation but increased mean precipitation and precipitable water
Static stability increases with rotation, net radiative cooling remains approximately constant, resulting in a smaller subsidence velocity
Rotating experiments have a larger effective climate sensitivity relative to RCE experiments mostly due to longwave radiative changes
ABSTRACT
We study the effect of self-interacting dark matter (SIDM) and baryons on the shape of early-type galaxies (ETGs) and their dark matter haloes, comparing them to the predictions of the cold ...dark matter (CDM) scenario. We use five hydrodynamical zoom-in simulations of haloes hosting ETGs ($M_{\rm vir}\sim 10^{13}\, \mathrm{M}_{\odot }$ and $M_{*}\sim 10^{11}\, \mathrm{M}_{\odot }$), simulated in CDM and a SIDM model with constant cross-section of σT/mχ = 1 cm2g−1. We measure the 3D and projected shapes of the dark matter haloes and their baryonic content using the inertia tensor and compare our measurements to the results of three HST samples of gravitational lenses and Chandra and XMM–Newton X-ray observations. We find that the inclusion of baryons greatly reduces the differences between CDM and a SIDM, together with the ability to draw constraints based on shapes. Lensing measurements reject the predictions of CDM dark-matter-only simulations and prefer one of the hydro scenarios. When we consider the total sample of lenses, observational data prefer the CDM hydro scenario. The shapes of the X-ray emitting gas are compatible with observational results in both hydro runs, with CDM predicting higher elongations only in the very centre. Contrary to previous claims at the scale of elliptical galaxies, we conclude that both CDM and our SIDM model can still explain observed shapes once we include baryons in the simulations. Our results demonstrate that this is essential to derive realistic constraints and that new simulations are needed to confirm and extend our findings.
Thermal barrier systems have been the subject of vigorous research and development activities over the past few years, driven by the demands for enhanced reliability and substantially higher ...operating temperatures envisaged for the next generations of gas turbine engines. The menu of candidate materials and architectures has expanded considerably, including numerous concepts based on zirconia as well as radically different materials, multilayers and modulated distributions of porosity and chemical composition. Advances in deposition processes enable increased flexibility for tailoring composition and microstructure to local requirements within the coating system, e.g. for thermal insulation, control of interdiffusion, enhanced resistance against environmental degradation and condition monitoring. Many challenges remain but healthy and growing collaborations between the science and technology communities bode well for future progress in this area.
PDF
