Successful 54 Gbit/s on–off keying (OOK) transmission over 2.2 km of multimode OM4 fibre is demonstrated. The decisive advantages of the single mode over multimode vertical cavity surface emitting ...laser (VCSEL) in transmission experiments are shown.
High‐speed discrete multitone serial data transmission over multi‐mode fibre at gross data rates up to 224 Gbit/s achieved with directly modulated oxide‐confined vertical cavity surface emitting ...lasers at 850 and 910 nm are presented.
High Speed VCSEL Technology and Applications Ledentsov, Nikolay N.; Makarov, O. Yu; Shchukin, V. A. ...
Journal of lightwave technology,
03/2022, Letnik:
40, Številka:
6
Journal Article
Recenzirano
Historically optical links up to 100-300m distances are served by light emitting devices in the 850 nm spectral range in combination with multimode glass fibers (MMF). As the silicon scaling ...continues, a single channel data rate is to double each 24 months. Light-emitting diodes had to be replaced by vertical cavity surface emitting lasers (VCSELs) and the data rate increased from 100 Mb/s to 10 Gb/s. At higher data rates problems with further scaling evolved. To avoid the collapse an anti-waveguiding VCSEL cavity design was invented, applied, and presently serves data links operating up to 50-100 Gb/s per channel. Another requirement in data communication is the bandwidth density scaling, with the number of channels per link increasing approximately 5-fold each 10 years, while keeping a similar space for connectors. A coarse short-wavelength division multiplexing allowing 850 nm, 880 nm, 910 nm, and 940 nm wavelengths in a single MMF is introduced. The bandwidth density increase is also possible by using multicore fiber (MCF) coupled to on-chip VCSEL arrays. The data rates up to 224 Gb/s are already reached by 850nm VCSELs. At such data rates significant transmission distance over MMF is only possible by applying ultra-narrow spectrum VCSELs minimizing the chromatic dispersion effects. On-chip mini-arrays of oxide-confined VCSELs allow a high coupling efficiency to MMFs, a narrow spectrum, a high power, a significant transmission distance at high data rates. Coherent lasing in such arrays allow photon-photon resonance engineering aimed at modulation bandwidths ∼50-100 GHz.
In this work, a novel design for the electrodes in a near quasi-single-mode (QSM) vertical-cavity surface-emitting laser (VCSEL) array with Zn-diffusion apertures inside is demonstrated to produce an ...effective improvement in the high-speed data transmission performance. By separating the electrodes in a compact 2×2 coupled VCSEL array into two parts, one for pure dc current injection and the other for large ac signal modulation, a significant enhancement in the high-speed data transmission performance can be observed. Compared with the single electrode reference, which parallels 4 VCSEL units in the array, the demonstrated array with its separated electrode design exhibits greater dampening of electrical-optical (E-O) frequency response and a larger 3-dB E-O bandwidth (19 vs. 15 GHz) under the same amount of total bias current (20 mA). Moreover, this significant improvement in dynamic performance does not come at the cost of any degradation in the static performance in terms of the maximum near QSM optical output power (17 mW @ 20 mA) and the Gaussian-like optical far-field pattern which has a narrow divergence angle (full-width half maximum (FWHM): 10° at 20 mA). The advantages of the separated electrode design lead to a much better quality of 32 Gbit/sec eye-opening as compared to that of the reference device (jitter: 1.5 vs. 2.8 ps) and error-free 32 Gbit/sec transmissions over a 500 m multi-mode fiber has been achieved under a moderate total bias current of 20 mA.
Dispersion in the multimode fibres (MMF) limits the transmission distance of the modern data communication networks. The authors show that the use of single-mode (SM) vertical cavity surface emitting ...lasers (VCSELs) in combination with the receiver module of a commercially available transceiver can increase the transmission distance to several kilometres. They report 25.78 Gbit/s error-free transmission over 1800 m of multimode fibre with 850 nm and 1400 m with 910 nm SM VCSELs. Data transmission up to 2600 and 2400 m can be achieved with BER below 3.8×10−3 forward error correction limit accordingly. The use of multiple wavelengths demonstrates the opportunity to increase the capacity of MMF links with shortwave wavelength division multiplexing.
We demonstrate 940-nm vertical-cavity surface-emitting lasers (VCSELs) with record-high -3 dB electrical-to-optical bandwidths of 40 and 32 GHz under room-temperature and 85 °C operations, ...respectively. The combination of Zn-diffusion with oxide-relief apertures inside the VCSEL cavity structure can greatly reduce the differential resistance and parasitic capacitance, which leads to an enhancement in the resistance-capacitance (RC)-limited bandwidth. Devices with different sizes of oxide-relief apertures are analyzed by use of the measured S 21 and S 11 two-port scattering parameters and equivalent circuit modeling techniques. For a device with a 3-μm diameter oxide-relief aperture, the extracted intrinsic bandwidth can be as high as 46.3 GHz. By using this novel device as the transmitter, we can achieve 60 Gbps error-free bit-error-ratio (BER) <;1 × 10 -12 ON-OFF keying transmission over a 1-m OM5 fiber under room temperature (RT) operation, without using any signal processing. In addition, invariant 50-Gbps transmission performance from RT to 85 °C operations, over a 100-m OM5 fiber has also been successfully demonstrated (with a BER <; 1 × 10 -7 ).
In this article, we report on energy efficient (6.2 mW/Gbit/s) transmitter and receiver assemblies capable of NRZ 80 Gbit/s and 72 Gbit/s fiber data transmission through 2 and 50 m of MMF, ...respectively. The optical link studied consisted of a 130 nm BiCMOS driver and transimpedance amplifier, ~30 GHz VCSEL, and ~27 GHz PD.
We report room temperature injection lasing in the yellow-orange spectral range (599-605 nm) in (Al
Ga
)
In
P-GaAs diodes with 4 layers of tensile-strained In
Ga
P quantum dot-like insertions. The ...wafers were grown by metal-organic vapor phase epitaxy side-by-side on (811), (211) and (322) GaAs substrates tilted towards the direction with respect to the (100) surface. Four sheets of GaP-rich quantum barrier insertions were applied to suppress leakage of non-equilibrium electrons from the gain medium. Laser diodes having a threshold current densities of ~7-10 kA/cm
at room temperature were realized for both (211) and (322) surface orientations at cavity lengths of ~1mm. Emission wavelength at room temperature ~600 nm is shorter by ~8 nm than previously reported. As an opposite example, the devices grown on (811) GaAs substrates did not show lasing at room temperature.
•HPC, on-board, industrial and automotive applications require operation at high temperatures.•We analyze 850 nm Quantum Dot VCSELs, capable of high-speed operation at extreme temperatures.•QD VCSELs ...show SM polarized emission and a unique feature of increasing bandwidth with temperature.•Record high speed operation is demonstrated, from 56 Gbit/s at 85 °C to 25 Gbit/s at 150 °C.