In this study, we evaluated the efficacy of hydroxychloroquine (HCQ) against coronavirus disease 2019 (COVID-19) via a randomized controlled trial (RCT) and a retrospective study.
Subjects admitted ...to 11 designated public hospitals in Taiwan between April 1 and May 31, 2020, with COVID-19 diagnosis confirmed by pharyngeal real-time RT-PCR for SARS-CoV-2, were randomized at a 2:1 ratio and stratified by mild or moderate illness. HCQ (400 mg twice for 1 d or HCQ 200 mg twice daily for 6 days) was administered. Both the study and control group received standard of care (SOC). Pharyngeal swabs and sputum were collected every other day. The proportion and time to negative viral PCR were assessed on day 14. In the retrospective study, medical records were reviewed for patients admitted before March 31, 2020.
There were 33 and 37 cases in the RCT and retrospective study, respectively. In the RCT, the median times to negative rRT-PCR from randomization to hospital day 14 were 5 days (95% CI; 1, 9 days) and 10 days (95% CI; 2, 12 days) for the HCQ and SOC groups, respectively (p = 0.40). On day 14, 81.0% (17/21) and 75.0% (9/12) of the subjects in the HCQ and SOC groups, respectively, had undetected virus (p = 0.36). In the retrospective study, 12 (42.9%) in the HCQ group and 5 (55.6%) in the control group had negative rRT-PCR results on hospital day 14 (p = 0.70).
Neither study demonstrated that HCQ shortened viral shedding in mild to moderate COVID-19 subjects.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Donor–acceptor (D–A) type semiconducting polymers have shown great potential for the application of deformable and stretchable electronics in recent decades. However, due to their heterogeneous ...structure with rigid backbones and long solubilizing side chains, the fundamental understanding of their molecular picture upon mechanical deformation still lacks investigation. Here, the molecular orientation of diketopyrrolopyrrole (DPP)‐based D–A polymer thin films is probed under tensile deformation via both experimental measurements and molecular modeling. The detailed morphological analysis demonstrates highly aligned polymer crystallites upon deformation, while the degree of backbone alignment is limited within the crystalline domain. Besides, the aromatic ring on polymer backbones rotates parallel to the strain direction despite the relatively low overall chain anisotropy. The effect of side‐chain length on the DPP chain alignment is observed to be less noticeable. These observations are distinct from traditional linear‐chain semicrystalline polymers like polyethylene due to distinct characteristics of backbone/side‐chain combination and the crystallographic characteristics in DPP polymers. Furthermore, a stable and isotropic charge carrier mobility is obtained from fabricated organic field‐effect transistors. This study deconvolutes the alignment of different components within the thin‐film microstructure and highlights that crystallite rotation and chain slippage are the primary deformation mechanisms for semiconducting polymers.
In this study, the chain alignment mechanism of semiconducting polymers under tensile deformation is carefully investigated. The thin‐film mechanical behavior is determined by the film‐on‐water tensile tester, while multimodal characterization methods are applied to capture the microstructural evolution, including hard, tender, soft X‐ray, UV–vis, and molecular simulation. Both crystallite rotation and chain sliding are determined to be the primary mechanisms during deformation.
This article presents the 38-GHz phased array 32-element Tx and 16-element Rx with 2-GHz IF and 5-GHz LO for fifth-generation (5G) millimeter-wave (MMW) communications. The Tx and Rx beamformers and ...upconverters/downconverters are fabricated in 65-nm CMOS. The PAs and LNAs near antenna ends are fabricated in 0.15-<inline-formula> <tex-math notation="LaTeX">\mu \text{m} </tex-math></inline-formula> GaAs pHEMT. The eight-element Tx and four-element Rx phased array printed circuit board (PCB) modules integrated with multiple integrated circuits (ICs) and endfire antennas are implemented as unit cells. Four pieces of Tx modules are vertically stacked to construct an <inline-formula> <tex-math notation="LaTeX">8\times {4} </tex-math></inline-formula> brick array (planar array), while four Rx modules are to construct a <inline-formula> <tex-math notation="LaTeX">4\times {4} </tex-math></inline-formula> array. According to 38-GHz over-the-air (OTA) measurements, the 32-element Tx shows 47.5-dBm equivalent isotropic radiated power (EIRP) at OP<inline-formula> <tex-math notation="LaTeX">_{\mathrm {1 ~dB}} </tex-math></inline-formula> with −35.2-dB image rejection ratio (IMRR) and −37.4-dB <inline-formula> <tex-math notation="LaTeX">\times 8 </tex-math></inline-formula> LORR. The 16-element Rx at 38 GHz shows −4-dBm OP<inline-formula> <tex-math notation="LaTeX">_{\mathrm {1~dB}} </tex-math></inline-formula> with −28-dB IMRR and −36.6-dB LORR. The Tx and Rx support the beam scanning around ±60° azimuth and ±30° elevation planes. The Tx-to-Rx wireless data link demonstrates 64 quadrature amplitude modulation (QAM)/400 M-BR, 256 QAM/200 M-BR, and 512 QAM/100 M-BR in 20 m. To the best of our knowledge, this work is the first 5G 37-/39-GHz phased array Tx/Rx using the scalable brick array configuration and demonstrating competitive performances compared with previous works.
An outbreak of coronavirus disease 2019 (COVID‐19) occurred in Wuhan and it has rapidly spread to almost all parts of the world. For coronaviruses, RNA‐dependent RNA polymerase (RdRp) is an important ...protease that catalyzes the replication of RNA from RNA template and is an attractive therapeutic target. In this study, we screened these chemical structures from traditional Chinese medicinal compounds proven to show antiviral activity in severe acute respiratory syndrome coronavirus (SARS‐CoV) and the similar chemical structures through a molecular docking study to target RdRp of SARS‐CoV‐2, SARS‐CoV, and Middle East respiratory syndrome coronavirus (MERS‐CoV). We found that theaflavin has a lower idock score in the catalytic pocket of RdRp in SARS‐CoV‐2 (−9.11 kcal/mol), SARS‐CoV (−8.03 kcal/mol), and MERS‐CoV (−8.26 kcal/mol) from idock. To confirm the result, we discovered that theaflavin has lower binding energy of −8.8 kcal/mol when it docks in the catalytic pocket of SARS‐CoV‐2 RdRp by using the Blind Docking server. Regarding contact modes, hydrophobic interactions contribute significantly in binding and additional hydrogen bonds were found between theaflavin and RdRp. Moreover, one π‐cation interaction was formed between theaflavin and Arg553 from the Blind Docking server. Our results suggest that theaflavin could be a potential SARS‐CoV‐2 RdRp inhibitor for further study.
Highlights
Theaflavin has a lower idock score in the catalytic pocket of RdRp in SARS‐CoV‐2, SARS‐CoV and MERS‐CoV from idock.
Theaflavin has a lowest binding energy when it docks in the catalytic pocket of SARS‐CoV‐2 RdRp.
Theaflavin could be potential SARS‐CoV‐2 RdRp inhibitor.
Due to its significant applications in many relevant fields, light detection in the solar‐blind deep‐ultraviolet (DUV) wavelength region is a subject of great interest for both scientific and ...industrial communities. The rapid advances in preparing high‐quality ultrawide‐bandgap (UWBG) semiconductors have enabled the realization of various high‐performance DUV photodetectors (DUVPDs) with different geometries, which provide an avenue for circumventing numerous disadvantages in traditional DUV detectors. This article presents a comprehensive review of the applications of inorganic UWBG semiconductors for solar‐blind DUV light detection in the past several decades. Different kinds of DUVPDs, which are based on varied UWBG semiconductors including Ga2O3, MgxZn1−xO, III‐nitride compounds (AlxGa1−xN/AlN and BN), diamond, etc., and operate on different working principles, are introduced and discussed systematically. Some emerging techniques to optimize device performance are addressed as well. Finally, the existing techniques are summarized and future challenges are proposed in order to shed light on development in this critical research field.
Recent advances in developing solar‐blind deep ultraviolet light (DUV) photodetectors based on various inorganic ultrawide‐bandgap semiconductors are reviewed, such as Ga2O3, MgxZn1−xO, III‐nitride compounds (AlxGa1−xN/AlN and BN), and diamonds.
In recent years, many studies have focused on the application of advanced technology as a way to improve management of construction safety management. A Wireless Sensor Network (WSN), one of the key ...technologies in Internet of Things (IoT) development, enables objects and devices to sense and communicate environmental conditions; Building Information Modeling (BIM), a revolutionary technology in construction, integrates database and geometry into a digital model which provides a visualized way in all construction lifecycle management. This paper integrates BIM and WSN into a unique system which enables the construction site to visually monitor the safety status via a spatial, colored interface and remove any hazardous gas automatically. Many wireless sensor nodes were placed on an underground construction site and to collect hazardous gas level and environmental condition (temperature and humidity) data, and in any region where an abnormal status is detected, the BIM model will alert the region and an alarm and ventilator on site will start automatically for warning and removing the hazard. The proposed system can greatly enhance the efficiency in construction safety management and provide an important reference information in rescue tasks. Finally, a case study demonstrates the applicability of the proposed system and the practical benefits, limitations, conclusions, and suggestions are summarized for further applications.
We previously revealed the origin of mammalian simple-type glycogen synthase kinase interaction protein (GSKIP), which served as a scavenger and a competitor in the Wnt signaling pathway during ...evolution. In this study, we investigated the conserved and nonconserved regions of the composite-type GSKIP by utilizing bioinformatics tools, site-directed mutagenesis, and yeast two-hybrid methods. The regions were denoted as the pre-GSK3β binding site, which is located at the front of GSK3β-binding sites. Our data demonstrated that clustered mitochondria protein 1 (CLU1), a type of composite-type GSKIP that exists in the mitochondria of all eukaryotic organisms, possesses the protein known as domain of unknown function 727 (DUF727), with a pre-GSK3β-binding site and a mutant GSK3β-binding flanking region. Another type of composite-type GSKIP, armadillo repeat containing 4 (ARMC4), which is known for cilium movement in vertebrates, contains an unintegrated DUF727 flanking region with a pre-GSK3β-binding site (115SPxF118) only. In addition, the sequence of the GSK3β-binding site in CLU1 revealed that Q126L and V130L were not conserved, differing from the ideal GSK3β-binding sequence of simple-type GSKIP. We further illustrated two exceptions, namely 70 kilodalton heat shock proteins (Hsp70/DnaK) and Mitofilin in nematodes, that presented an unexpected ideal GSK3β-binding region with a pre-GSK3β sequence; this composite-type GSKIP could only occur in vertebrate species. Furthermore, we revealed the importance of the pre-GSK3β-binding site (118F or 118Y) and various mutant GSK3β-binding sites of composite-type GSKIP. Collectively, our data suggest that the new composite-type GSKIP starts with a DUF727 domain followed by a pre-GSK3β-binding site, with the subsequent addition of the GSK3β-binding site, which plays vital roles for CLU1, Mitofilin, and ARMC4 in mitochondria and Wnt signaling pathways during evolution.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
The novel growth of cesium lead halide perovskite thin films, which are prepared through thousand‐layer rapid alternative deposition, is performed by developing an active perovskite film consisting ...of a layer‐by‐layer structure. This method is considerably more difficult to be implemented from the solution process. The obtained thin film morphology and characteristics are distinguished from that of the traditional a few layers and two‐material codeposition. These alternative deposited perovskites are integrated with vacuum‐deposited carrier‐transporting layers and electrodes, and all vacuum‐sublimed perovskite solar cells exhibit an outstanding power conversion efficiency of 13.0%. The use of these devices for environmental light energy harvesting provides a power conversion efficiency of 33.9% under fluorescent light illumination of 1000 lux.
Rapid alternative deposition provides new approaches for Cs‐based perovskite fabrication. The thousand‐layer CsPbI2Br thin films obtained through this method exhibit a smooth surface and high crystallinity, and the solar cell devices deliver excellent performance under both 1‐sun solar and fluorescent light illumination.
Many works in recent years have been focused on developing a portable and less expensive system for diagnosing patients with obstructive sleep apnea (OSA), instead of using the inconvenient and ...expensive polysomnography (PSG). This study proposes a sleep apnea detection system based on a one-dimensional (1D) deep convolutional neural network (CNN) model using the single-lead 1D electrocardiogram (ECG) signals. The proposed CNN model consists of 10 identical CNN-based feature extraction layers, a flattened layer, 4 identical classification layers mainly composed of fully connected networks, and a softmax classification layer. Thirty-five released and thirty-five withheld ECG recordings from the MIT PhysioNet Apnea-ECG Database were applied to train the proposed CNN model and validate its accuracy for the detection of the apnea events. The results show that the proposed model achieves 87.9% accuracy, 92.0% specificity, and 81.1% sensitivity for per-minute apnea detection, and 97.1% accuracy, 100% specificity, and 95.7% sensitivity for per-recording classification. The proposed model improves the accuracy of sleep apnea detection in comparison with several feature-engineering-based and feature-learning-based approaches.
A novel approach for using conjugated rod–coil materials as a floating gate in the fabrication of nonvolatile photonic transistor memory devices, consisting of n‐type Sol‐PDI and p‐type C10‐DNTT, is ...presented. Sol‐PDI and C10‐DNTT are used as dual functions of charge‐trapping (conjugated rod) and tunneling (insulating coil), while n‐type BPE‐PDI and p‐type DNTT are employed as the corresponding transporting layers. By using the same conjugated rod in the memory layer and transporting channel with a self‐assembled structure, both n‐type and p‐type memory devices exhibit a fast response, a high current contrast between “Photo‐On” and “Electrical‐Off” bistable states over 105, and an extremely low programing driving force of 0.1 V. The fabricated photon‐driven memory devices exhibit a quick response to different wavelengths of light and a broadband light response that highlight their promising potential for light‐recorder and synaptic device applications.
High‐performance photonic transistor memory devices are fabricated using conjugated rod–coil materials as a photoactive floating gate, in which the conjugated rods and side‐chain coils act as charge‐trapping and tunneling moieties, respectively. By inheriting their self‐assembled structure, both n‐type and p‐type memory devices exhibit a fast response, a current contrast over 105, and an extremely low programing driving force of 0.1 V.
PDF
