We present a source of entangled photons that violates a Bell inequality free of the "fair-sampling" assumption, by over 7 standard deviations. This violation is the first reported experiment with ...photons to close the detection loophole, and we demonstrate enough "efficiency" overhead to eventually perform a fully loophole-free test of local realism. The entanglement quality is verified by maximally violating additional Bell tests, testing the upper limit of quantum correlations. Finally, we use the source to generate "device-independent" private quantum random numbers at rates over 4 orders of magnitude beyond previous experiments.
The Boudouard reaction, which is the reaction of carbon and carbon dioxide to produce carbon monoxide, represents a simple and straightforward method for the remediation of carbon dioxide in the ...environment through reduction: CO2(g) + C(s) ⇌ 2CO. However, due to the large positive enthalpy, typically reported to be 172 kJ/mol under standard conditions at 298 K, the equilibrium does not favor CO production until temperatures >700 °C, when the entropic term, −TΔS, begins to dominate and the free energy becomes negative. We have found that, under microwave irradiation to selectively heat the carbon, dramatically different thermodynamics for the reaction are observed. During kinetic studies of the reaction under conditions of flowing CO2, the apparent activation energy dropped from 118.4 kJ/mol under conventional convective heating to 38.5 kJ/mol under microwave irradiation. From measurement of the equilibrium constants as a function of temperature, the enthalpy of the reaction dropped from 183.3 kJ/mol at ∼1100 K to 33.4 kJ/mol at the same temperature under microwave irradiation. This changes the position of the equilibrium so that the temperature at which CO becomes the major product drops from 643 °C in the conventional thermal reaction to 213 °C in the microwave. The observed reduction in the apparent enthalpy of the microwave driven reaction, compared to what is determined for the thermal reaction from standard heats of formation, can be thought of as arising from additional energy being put into the carbon by the microwaves, effectively increasing its apparent standard enthalpy. Mechanistically, it is hypothesized that the enhanced reactivity arises from the interaction of CO2 with the steady-state concentration of electron–hole pairs that are present at the surface of the carbon due to the space-charge mechanism, by which microwaves are known to heat carbon. Such a mechanism is unique to microwave-induced heating and, given the effect it has on the thermodynamics of the Boudouard reaction, suggests that its use may yield energy savings in driving the general class of gas–carbon reactions.
We report on MoSi SNSPDs which achieved high system detection efficiency (87.1 ± 0.5% at 1542 nm) at 0.7 K and we demonstrate that these detectors can also be operated with saturated internal ...efficiency at a temperature of 2.3 K in a Gifford-McMahon cryocooler. We measured a minimum system jitter of 76 ps, maximum count rate approaching 10 MHz, and polarization dependence as low as 3.3 ± 0.1%. The performance of MoSi SNSPDs at 2.3 K is similar to the performance of WSi SNSPDs at < 1 K. The higher operating temperature of MoSi SNSPDs makes these devices promising for widespread use due to the simpler and less expensive cryogenics required for their operation.
Single-photon detectors at near-infrared wavelengths with high system detection efficiency (>90%), low dark count rate (<1 c.p.s.), low timing jitter (<100 ps) and short reset time (<100 ns) would ...enable landmark experiments in a variety of fields. Although some of the existing approaches to single-photon detection fulfil one or two of the above specifications, to date, no detector has met all of the specifications simultaneously. Here, we report on a fibre-coupled single-photon detection system that uses superconducting nanowire single-photon detectors and closely approaches the ideal performance of single-photon detectors. Our detector system has a system detection efficiency (including optical coupling losses) greater than 90% in the wavelength range λ = 1,520-1,610 nm, with a device dark count rate (measured with the device shielded from any background radiation) of ∼1 c.p.s., timing jitter of ∼150 ps full-width at half-maximum (FWHM) and reset time of 40 ns.
Growing interest in quantum computing for practical applications has led to a surge in the availability of programmable machines for executing quantum algorithms
. Present-day photonic quantum ...computers
have been limited either to non-deterministic operation, low photon numbers and rates, or fixed random gate sequences. Here we introduce a full-stack hardware-software system for executing many-photon quantum circuit operations using integrated nanophotonics: a programmable chip, operating at room temperature and interfaced with a fully automated control system. The system enables remote users to execute quantum algorithms that require up to eight modes of strongly squeezed vacuum initialized as two-mode squeezed states in single temporal modes, a fully general and programmable four-mode interferometer, and photon number-resolving readout on all outputs. Detection of multi-photon events with photon numbers and rates exceeding any previous programmable quantum optical demonstration is made possible by strong squeezing and high sampling rates. We verify the non-classicality of the device output, and use the platform to carry out proof-of-principle demonstrations of three quantum algorithms: Gaussian boson sampling, molecular vibronic spectra and graph similarity
. These demonstrations validate the platform as a launchpad for scaling photonic technologies for quantum information processing.
We developed superconducting nanowire single-photon detectors based on tungsten silicide, which show saturated internal detection efficiency up to a wavelength of 10 μm. These detectors are promising ...for applications in the mid-infrared requiring sub-nanosecond timing, ultra-high gain stability, low dark counts, and high efficiency, such as chemical sensing, LIDAR, dark matter searches, and exoplanet spectroscopy.
For photon-counting applications at ultraviolet wavelengths, there are currently no detectors that combine high efficiency (> 50%), sub-nanosecond timing resolution, and sub-Hz dark count rates. ...Superconducting nanowire single-photon detectors (SNSPDs) have seen success over the past decade for photon-counting applications in the near-infrared, but little work has been done to optimize SNSPDs for wavelengths below 400 nm. Here, we describe the design, fabrication, and characterization of UV SNSPDs operating at wavelengths between 250 and 370 nm. The detectors have active areas up to 56 μm in diameter, 70 - 80% efficiency at temperatures up to 4.2 K, timing resolution down to 60 ps FWHM, blindness to visible and infrared photons, and dark count rates of ∼ 0.25 counts/hr for a 56 μm diameter pixel. These performance metrics make UV SNSPDs ideal for applications in trapped-ion quantum information processing, lidar studies of the upper atmosphere, UV fluorescent-lifetime imaging microscopy, and photon-starved UV astronomy.
We demonstrate the violation of an Einstein-Podolsky-Rosen steering inequality developed for single-photon path entanglement with displacement-based detection. We use a high-rate source of heralded ...single-photon path-entangled states, combined with high-efficiency superconducting-based detectors, in a scheme that is free of any postselection and thus immune to the detection loophole. This result conclusively demonstrates single-photon entanglement in a one-sided device-independent scenario, and opens the way towards implementations of device-independent quantum technologies within the paradigm of path entanglement.