Nanomaterials have the potential to improve how patients are clinically treated and diagnosed. While there are a number of nanomaterials that can be used toward improved drug delivery and imaging, ...how these nanomaterials confer an advantage over other nanomaterials, as well as current clinical approaches is often application or disease specific. How the unique properties of carbon nanomaterials, such as nanodiamonds, carbon nanotubes, carbon nanofibers, graphene, and graphene oxides, make them promising nanomaterials for a wide range of clinical applications are discussed herein, including treating chemoresistant cancer, enhancing magnetic resonance imaging, and improving tissue regeneration and stem cell banking, among others. Additionally, the strategies for further improving drug delivery and imaging by carbon nanomaterials are reviewed, such as inducing endothelial leakiness as well as applying artificial intelligence toward designing optimal nanoparticle‐based drug combination delivery. While the clinical application of carbon nanomaterials is still an emerging field of research, there is substantial preclinical evidence of the translational potential of carbon nanomaterials. Early clinically trial studies are highlighted, further supporting the use of carbon nanomaterials in clinical applications for both drug delivery and imaging.
Biomedical application of carbon nanomaterials as well as the potential clinical implementation of carbon nanomaterials includes enhanced drug delivery, improved sensitivity of clinical diagnostic tools and imaging drugs, as well as more effective regenerative medical platforms.
In this work we demonstrate a facile means to generate fluorescent carbon nanoribbons, nanoparticles, and graphene from graphite electrode using ionic liquid-assisted electrochemical exfoliation. A ...time-dependence study of products exfoliated from the graphite anode allows the reconstruction of the exfoliation mechanism based on the interplay of anodic oxidation and anion intercalation. We have developed strategies to control the distribution of the exfoliated products. In addition, the fluorescence of these carbon nanomaterials can be tuned from the visible to ultraviolet region by controlling the water content in the ionic liquid electrolyte.
Interface confined reactions, which can modulate the bonding of reactants with catalytic centres and influence the rate of the mass transport from bulk solution, have emerged as a viable strategy for ...achieving highly stable and selective catalysis. Here we demonstrate that 1T'-enriched lithiated molybdenum disulfide is a highly powerful reducing agent, which can be exploited for the in-situ reduction of metal ions within the inner planes of lithiated molybdenum disulfide to form a zero valent metal-intercalated molybdenum disulfide. The confinement of platinum nanoparticles within the molybdenum disulfide layered structure leads to enhanced hydrogen evolution reaction activity and stability compared to catalysts dispersed on carbon support. In particular, the inner platinum surface is accessible to charged species like proton and metal ions, while blocking poisoning by larger sized pollutants or neutral molecules. This points a way forward for using bulk intercalated compounds for energy related applications.
It is difficult to achieve high efficiency production of hydrophobic graphene by liquid phase exfoliation due to its poor dispersibility and the tendency of graphene sheets to undergo π-π stacking. ...Here, we report a water-phase, non-dispersion exfoliation method to produce highly crystalline graphene flakes, which can be stored in the form of a concentrated slurry (50 mg mL
) or filter cake for months without the risk of re-stacking. The as-exfoliated graphene slurry can be directly used for 3D printing, as well as fabricating conductive graphene aerogels and graphene-polymer composites, thus avoiding the use of copious quantities of organic solvents and lowering the manufacturing cost. This non-dispersion strategy paves the way for the cost-effective and environmentally friendly production of graphene-based materials.
There have been several recent conflicting reports on the ferromagnetism of clean monolayer VSe2. Herein, the controllable formation of 1D defect line patterns in vanadium diselenide (VSe2) ...monolayers initiated by thermal annealing is presented. Using scanning tunneling microscopy and q‐plus atomic force microscopy techniques, the 1D line features are determined to be 8‐member‐ring arrays, formed via a Se deficient reconstruction process. The reconstructed VSe2 monolayer with Se‐deficient line defects displays room‐temperature ferromagnetism under X‐ray magnetic circular dichroism and magnetic force microscopy, consistent with the density functional theory calculations. This study possibly resolves the controversy on whether ferromagnetism is intrinsic in monolayer VSe2, and highlights the importance of controlling and understanding the atomic structures of surface defects in 2D crystals, which could play key roles in the material properties and hence potential device applications.
One‐dimensional defect line patterns are formed in monolayer VSe2 upon high‐temperature annealing. X‐ray magnetic circular dichroism and magnetic force microscopy confirm that such Se‐deficient reconstructed defects cause the onset of ferromagnetism in pristine VSe2. This study provides a way to engineer the magnetism via controlling the atomic structures of surface defects in 2D crystals.
Graphene has attracted worldwide interest since its experimental discovery, but the preparation of large-area, continuous graphene film on SiO2/Si wafers, free from growth-related morphological ...defects or transfer-induced cracks and folds, remains a formidable challenge. Growth of graphene by chemical vapour deposition on Cu foils has emerged as a powerful technique owing to its compatibility with industrial-scale roll-to-roll technology. However, the polycrystalline nature and microscopic roughness of Cu foils means that such roll-to-roll transferred films are not devoid of cracks and folds. High-fidelity transfer or direct growth of high-quality graphene films on arbitrary substrates is needed to enable wide-ranging applications in photonics or electronics, which include devices such as optoelectronic modulators, transistors, on-chip biosensors and tunnelling barriers. The direct growth of graphene film on an insulating substrate, such as a SiO2/Si wafer, would be useful for this purpose, but current research efforts remain grounded at the proof-of-concept stage, where only discontinuous, nanometre-sized islands can be obtained. Here we develop a face-to-face transfer method for wafer-scale graphene films that is so far the only known way to accomplish both the growth and transfer steps on one wafer. This spontaneous transfer method relies on nascent gas bubbles and capillary bridges between the graphene film and the underlying substrate during etching of the metal catalyst, which is analogous to the method used by tree frogs to remain attached to submerged leaves. In contrast to the previous wet or dry transfer results, the face-to-face transfer does not have to be done by hand and is compatible with any size and shape of substrate; this approach also enjoys the benefit of a much reduced density of transfer defects compared with the conventional transfer method. Most importantly, the direct growth and spontaneous attachment of graphene on the underlying substrate is amenable to batch processing in a semiconductor production line, and thus will speed up the technological application of graphene.
Celotno besedilo
Dostopno za:
DOBA, IJS, IZUM, KILJ, KISLJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Mono- or few-layer sheets of covalent organic frameworks (COFs) represent an attractive platform of two-dimensional materials that hold promise for tailor-made functionality and pores, through ...judicious design of the COF building blocks. But although a wide variety of layered COFs have been synthesized, cleaving their interlayer stacking to obtain COF sheets of uniform thickness has remained challenging. Here, we have partitioned the interlayer space in COFs by incorporating pseudorotaxane units into their backbones. Macrocyclic hosts based on crown ethers were embedded into either a ditopic or a tetratopic acylhydrazide building block. Reaction with a tritopic aldehyde linker led to the formation of acylhydrazone-based layered COFs in which one basal plane is composed of either one layer, in the case of the ditopic macrocyclic component, or two adjacent layers covalently held together by its tetratopic counterpart. When a viologen threading unit is introduced, the formation of a host-guest complex facilitates the self-exfoliation of the COFs into crystalline monolayers or bilayers, respectively.
Ferroelectric thin film has attracted great interest for nonvolatile memory applications and can be used in either ferroelectric Schottky diodes or ferroelectric tunneling junctions due to its ...promise of fast switching speed, high on-to-off ratio, and nondestructive readout. Two-dimensional α-phase indium selenide (In2Se3), which has a modest band gap and robust ferroelectric properties stabilized by dipole locking, is an excellent candidate for multidirectional piezoelectric and switchable photodiode applications. However, the large-scale synthesis of this material is still elusive, and its performance as a ferroresistive memory junction is rarely reported. Here, we report the low-temperature molecular-beam epitaxy (MBE) of large-area monolayer α-In2Se3 on graphene and demonstrate the use of α-In2Se3 on graphene in ferroelectric Schottky diode junctions by employing high-work-function gold as the top electrode. The polarization-modulated Schottky barrier formed at the interface exhibits a giant electroresistance ratio of 3.9 × 106 with a readout current density of >12 A/cm2, which is more than 200% higher than the state-of-the-art technology. Our MBE growth method allows a high-quality ultrathin film of In2Se3 to be heteroepitaxially grown on graphene, thereby simplifying the fabrication of high-performance 2D ferroelectric junctions for ferroresistive memory applications.
Most two-dimensional (2D) covalent organic frameworks (COFs) are non-fluorescent in the solid state even when they are constructed from emissive building blocks. The fluorescence quenching is usually ...attributed to non-irradiative rotation-related or π-π stacking-caused thermal energy dissipation process. Currently there is a lack of guiding principle on how to design fluorescent, solid-state material made of COF. Herein, we demonstrate that the eclipsed stacking structure of 2D COFs can be used to turn on, and tune, the solid-state photoluminescence from non-emissive building blocks by the restriction of intramolecular bond rotation via intralayer and interlayer hydrogen bonds among highly organized layers in the eclipse-stacked COFs. Our COFs serve as a platform whereby the size of the conjugated linkers and side-chain functionalities can be varied, rendering the emission colour-tuneable from blue to yellow and even white. This work provides a guide to design new solid-state emitters using COFs.
PDF
