Individual respiratory protective devices and face masks represent critical tools in protecting health care workers in hospitals and clinics, and play a central role in decreasing the spread of the ...high-risk pandemic infection of 2019, coronavirus disease (COVID-19). The aim of the present study was to compare the facial skin temperature and the heat flow when wearing medical surgical masks to the same factors when wearing N95 respirators. A total of 20 subjects were recruited and during the evaluation, each subject was invited to wear a surgical mask or respirator for 1 h. The next day in the morning at the same hour, the same subject wore a N95 mask for 1 h with the same protocol. Infrared thermal evaluation was performed to measure the facial temperature of the perioral region and the perception ratings related to the humidity, heat, breathing difficulty, and discomfort were recorded. A significant difference in heat flow and perioral region temperature was recorded between the surgical mask and the N95 respirator (
< 0.05). A statistically significant difference in humidity, heat, breathing difficulty, and discomfort was present between the groups. The study results suggest that N95 respirators are able to induce an increased facial skin temperature, greater discomfort and lower wearing adherence when compared to the medical surgical masks.
Background
The eyebrow area is a clinically critical district due to the anatomical complexity and the propensity to aging-related atrophy. Hyaluronic acid fillers have been proposed to recover the ...dermal volume of the facial and lips regions.
Aim
The aim of the present investigation was to evaluate hyaluronic acid fillers enriched with glycine and proline for the treatment of eyebrow augmentation.
Methods
A total of 15 healthy patients were treated with eyebrow augmentation procedure. The distance between mid-bipupil to lateral eyebrow and mid-eyebrow to the medial eyebrow was measured before, immediately after treatment and at follow-up of 6 months.
Results
The healing period was uneventful, and no evidence of inflammation or swelling associated with the treatment was reported. No macroscopical alteration was reported in the surrounding tissues with no evidences of visible wheals or lumps in the treated sites at the follow-up. Before treatment, the angle was equal to 9.32 ± 0.2°, while after treatment it was 11.21 ± 0.4° (
p
< 0.01); after three and 6 weeks, it was, respectively, 10.66 ± 0.2° (
p
<0.05) and 10.02 ± 0.3°(
p
> 0.05).
Conclusions
The study results suggest that the hyaluronic acid fillers enriched with glycine and proline treatment resulted as being a useful procedure for augmentation, contour and volume definition and elevation of the eyebrow region with a high-level aesthetic result.
Level of Evidence IV
This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors
www.springer.com/00266
.
Background: The clinical use of zirconia implants has been shown to increase steadily due to their biological, aesthetic, and physical properties; therefore, this bibliometric study aimed to review ...the clinical research and co-authors in the field of zirconia dental implant rehabilitation. Methods: We searched Scopus and Web of Science databases using a comprehensive search strategy to 5 October 2020, and independently paired reviewers who screened studies, and collected data with inclusion criteria restricted to clinical research only (either prospective or retrospective). Data on article title, co-authors, number of citations received, journal details, publication year, country and institution involved, funding, study design, marginal bone loss, survival rate, failure, follow-up, and the author’s bibliometric data were collected and evaluated. Results: A total of 29 clinical studies were published between 2008 and 2020 as 41.4% were prospective cohort studies and 48.3% originated from Germany. Most of the included studies had been published in Clinical Oral Implant Research (n = 12), and the most productive institution was the Medical Center of University of Freiburg. The author with the largest number of clinical studies on zirconia implants was Kohal R.J. (n = 10), followed by Spies B.C. (n = 8). Conclusions: This study revealed that zirconia implants have been more prominent in the last ten years, which is a valuable option for oral rehabilitation with marginal bone loss and survival rate comparable to titanium dental implants.
Recently a greater interest in tissue engineering for the treatment of large bone defect has been reported. The aim of the present systematic review and meta-analysis was to investigate the ...effectiveness of dental pulp stem cells and synthetic block complexes for bone defect treatment in preclinical in vivo articles.
The electronic database and manual search was conducted on Pubmed, Scopus, and EMBASE. The papers identified were submitted for risk-of-bias assessment and classified according to new bone formation, bone graft characteristics, dental pulp stem cells (DPSCs) culture passages and amount of experimental data. The meta-analysis assessment was conducted to assess new bone formation in test sites with DPSCs/synthetic blocks vs. synthetic block alone.
The database search identified a total of 348 papers. After the initial screening, 30 studies were included, according to the different animal models: 19 papers on rats, 3 articles on rabbits, 2 manuscripts on sheep and 4 papers on swine. The meta-analysis evaluation showed a significantly increase in new bone formation in favor of DPSCs/synthetic scaffold complexes, if compared to the control at 4 weeks (Mean Diff: 17.09%, 95% CI: 15.16-18.91%,
< 0.01) and at 8 weeks (Mean Diff: 14.86%, 95% CI: 1.82-27.91%,
< 0.01) in rats calvaria bone defects.
The synthetic scaffolds in association of DPSCs used for the treatment of bone defects showed encouraging results of early new bone formation in preclinical animal studies and could represent a useful resource for regenerative bone augmentation procedures.
Zygomatic implants have been proposed in literature for atrophic maxillary fixed oral rehabilitations. The aim of the present research was to evaluate, by a clinical and tomography assessment, a ...surgical complication of a zygomatic implant penetration to the orbit.
A 56 year-old female patient was visited for pain and swelling in the left orbit after a zygomatic implant protocol. The orbit invasion of the zygomatic implant screw was confirmed by the CBCT scan. The patient was treated for surgical implant removal and the peri- and post-operative symptoms were assessed. No neurological complications were reported at the follow-up. The ocular motility and the visual acuity were well maintained. No purulent secretion or inflammatory evidence were reported in the post-operative healing phases.
The penetration of the orbit during a zygomatic implant positioning is a surgical complication that could compromise the sight and movements of the eye. In the present case report, a zygomatic implant removal resulted in an uneventful healing phase with recovery of the eye functions.
The treatment of peri-implantitis implies the decontamination of the surface of the fixture. This study aims to analyze the effect of the erbium-doped yttrium aluminum garnet laser (Er: YAG) on ...sandblasted and acid-etched (SLA) titanium. 30 titanium SLA disks were divided into three groups. In Group 1, the disks were left intact; on the contrary, both Groups 2 and 3 were irradiated with the Er: YAG laser at different settings, with a pulse duration of 300 μs and a period of 30 s. Group 2 was irradiated at 1 W and 100 mJ/pulse and Group 3 at 4 W and 400 mJ/pulse. The superficial changes at chemical, nano, and microscopical levels were detected through the use of Fourier-transform infrared spectroscopy, atomic force microscopy, and scanning electron microscope. The Kruskal–Wallis test, followed by the Dunn–Bonferroni Post Hoc analysis, detected the presence of statistically significant differences among the groups. The level of significance was p ≤ 0.05. Results showed that Er: YAG irradiation promoted a significant (p < 0.05) increase of oxides and a decrease of microscopical roughness and porosity on SLA disks. However, the protocol tested on group 3 seemed to be too aggressive for the titanium surface, as shown by the presence of micro-cracks and signs of coagulation, melting, and microfractures. In conclusion, Group 2 showed significantly minor surface alterations with respect to Group 3, and the increase of superficial oxide level, the decrease of porosity, and micro-roughness represent a positive alteration that could protect the materials against bacterial adhesion.
The process of osseointegration of dental implants is characterized by healing phenomena at the level of the interface between the surface and the bone. Implant surface modification has been ...introduced in order to increase the level of osseointegration. The purpose of this study is to evaluate the influence of biofunctional coatings for dental implants and the bone healing response in a rabbit model. The implant surface coated with collagen type I was analyzed through X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM), micro-CT and histologically.
The sandblasted and double acid etched surface coated with collagen type I, and uncoated sandblasted and double acid etched surface were evaluated by X-ray Photoelectron Spectroscopy (XPS) and Atomic Force Microscopy (AFM) analysis in order evaluate the different morphology. In vivo, a total of 36 implants were positioned in rabbit articular femoral knee-joint, 18 fixtures for each surface. Micro-CT scans, histological and histomorphometrical analysis were conducted at 15, 30 and 60 days.
A histological statistical differences were evident at 15, 30 and 60 days (
< 0.001). Both implant surfaces showed a close interaction with newly formed bone. Mature bone appeared in close contact with the surface of the fixture. The AFM outcome showed a similar roughness for both surfaces.
However, the final results showed that a coating of collagen type I on the implant surface represents a promising procedure able to improve osseointegration, especially in regions with a low bone quality.
Background-the graphene-doping procedure represents a useful procedure to improve the mechanical, physical and biological response of several Polymethyl methacrylate (PMMA)-derived polymers and ...biomaterials for dental applications. The aim of this study was to evaluate osseointegration of Graphene doped Poly(methyl methacrylate) (GD-PMMA) compared with PMMA as potential materials for dental implant devices. Methods-eighteen adult New Zealand white male rabbits with a mean weight of approx. 3000 g were used in this research. A total of eighteen implants of 3.5 mm diameter and 11 mm length in GD-PMMA and eighteen implants in PMMA were used. The implants were placed into the articular femoral knee joint. The animals were sacrificed after 15, 30 and 60 days and the specimens were evaluated by µCT and histomorphometry. Results-microscopically, all 36 implants, 18 in PMMA and 18 in DG-PMMA were well-integrated into the bone. The implants were in contact with cortical bone along the upper threads, while the lower threads were in contact with either newly formed bone or with marrow spaces. The histomorphometry and µCT evaluation showed that the GP-PMMA and PMMA implants were well osseointegrated and the bone was in direct contact with large portions of the implant surfaces, including the space in the medullary canal. Conclusions-in conclusion, the results suggest that GD-PMMA titanium surfaces enhance osseointegration in rabbit femurs. This encourages further research to obtain GD-PMMA with a greater radiopacity. Also, further in vitro and vivo animal studies are necessary to evaluate a potential clinical usage for dental implant applications.
Objectives
The face aging processes are associated with physiologic and biochemical alteration that produces wrinkles, skin pigmentation and benign growths. The aim of this study was to evaluate the ...clinical efficacy of voltaic arc dermabrasion with plasma to remove benign facial skin lesions.
Study Design
Voltaic arc dermabrasion plasma technique was used to remove the facial benign skin lesions. The study involved 45 patients (26 females;19 males) treated for benign facial skin lesions with voltaic arc dermabrasion also called plasma exeresis technique. The subjects age ranged between 43 and 65 years. The clinical observations and comparison of pretreatment and post-treatment photographs of the treated regions were performed by a joint examiner at each follow-up visit.
Results
During plasma irradiation, the average temperature of the skin was 290.3 ± 21.7 °C, while immediately after it was 90.6 ± 21.8 °C. Overall clinical improvement was 100% in six lesions with complete resolution of all lesions. Three patients observed a transient post-inflammatory pigmentation with a peak at 1 month after VAD treatment, gradually fading spontaneously over 2 to 3 months.
Conclusions
The voltaic arc dermabrasion technique (atmospheric plasma) should be considered for lesions, especially relatively superficial ones, and small lesions that are located on the face.
Level of Evidence IV
This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors
www.springer.com/00266
.
Background: Dental components manufactured with zirconia (ZrO2) represent a significant percentage of the implant prosthetic market in dentistry. However, during the last few years, we have observed ...robust clinical and pre-clinical scientific investigations on zirconia both as a prosthetic and an implantable material. At the same time, we have witnessed consistent technical and manufacturing updates with regards to the applications of zirconia which appear to gradually clarify points which until recently were not well understood. Methods: This critical review evaluated the “state of the art” in relation to applications of this biomaterial in dental components and its interactions with oral tissues. Results: The physico-chemical and structural properties as well as the current surface treatment methodologies for ZrO2 were explored. A critical investigation of the cellular response to this biomaterial was completed and the clinical implications discussed. Finally, surface treatments of ZrO2 demonstrate that excellent osseointegration is possible and provide encouraging prospects for rapid bone adhesion. Furthermore, sophisticated surface treatment techniques and technologies are providing impressive oral soft tissue cell responses thus leading to superior biological seal. Conclusions: Dental devices manufactured from ZrO2 are structurally and chemically stable with biocompatibility levels allowing for safe and long-term function in the oral environment.
PDF
