Two-dimensional (2D) materials have been studied extensively as monolayers, vertical or lateral heterostructures. To achieve functionalization, monolayers are often patterned using soft lithography ...and selectively decorated with molecules. Here we demonstrate the growth of a family of 2D materials that are intrinsically patterned. We demonstrate that a monolayer of PtSe
can be grown on a Pt substrate in the form of a triangular pattern of alternating 1T and 1H phases. Moreover, we show that, in a monolayer of CuSe grown on a Cu substrate, strain relaxation leads to periodic patterns of triangular nanopores with uniform size. Adsorption of different species at preferred pattern sites is also achieved, demonstrating that these materials can serve as templates for selective self-assembly of molecules or nanoclusters, as well as for the functionalization of the same substrate with two different species.
This Letter reports a measurement of the flux and energy spectrum of electron antineutrinos from six 2.9 GWth nuclear reactors with six detectors deployed in two near (effective baselines 512 and 561 ...m) and one far (1579 m) underground experimental halls in the Daya Bay experiment. Using 217 days of data, 296 721 and 41 589 inverse β decay (IBD) candidates were detected in the near and far halls, respectively. The measured IBD yield is (1.55±0.04) ×10(-18) cm(2) GW(-1) day(-1) or (5.92±0.14) ×10(-43) cm(2) fission(-1). This flux measurement is consistent with previous short-baseline reactor antineutrino experiments and is 0.946±0.022 (0.991±0.023) relative to the flux predicted with the Huber-Mueller (ILL-Vogel) fissile antineutrino model. The measured IBD positron energy spectrum deviates from both spectral predictions by more than 2σ over the full energy range with a local significance of up to ∼4σ between 4-6 MeV. A reactor antineutrino spectrum of IBD reactions is extracted from the measured positron energy spectrum for model-independent predictions.
Micro-structural evolution and grain refinement in ANSI 304 stainless steel subjected to multiple laser shock processing (LSP) impacts were investigated by means of cross-sectional optical microscopy ...and transmission electron microscopy observations. The plastic strain-induced grain refinement mechanism of the face-centered cubic (fcc) materials with very low stacking fault energy was identified. The micro-structure was obviously refined due to the ultra-high plastic strain induced by multiple LSP impacts. The minimum grain size in the top surface was about 50–200
nm. Multidirectional mechanical twin matrix (MT)–MT intersections led to grain subdivision at the top surface during multiple LSP impacts. Furthermore, a novel structure with submicron triangular blocks was found at the top surface subjected to three LSP impacts. The grain refinement process along the depth direction after multiple LSP impacts can be described as follows: (i) formation of planar dislocation arrays (PDAs) and stacking faults along multiple directions due to the pile up of dislocation lines; (ii) formation of submicron triangular blocks (or irregularly shaped blocks) by the intersection of MT–MT (or MT–PDA or PDA–PDA) along multiple directions; (iii) transformation of MTs into subgrain boundaries; (iv) evolution by continuous dynamic recrystallization of subgrain boundaries to refined grain boundaries. The experimental results and analyses indicate that a high strain with an ultra-high strain rate play a crucial role in the grain refinement process of fcc materials subjected to multiple LSP impacts.
Display omitted
•Multilayer coatings mixed different Fe-based powders were investigated.•Microstructure and element distribution between both layers were investigated.•Ni element made alloying ...elements more evenly distributed in the LCed coatings.•Ni element improved impact toughness and corrosion resistance of LCed coatings.•Relationship between hardness and impact toughness of LCed coatings was presented.
Multilayer coatings with Fe-based powders that mixed different elements were prepared in the surface layer of 4Cr5MoSiV1 steel by laser cladding, and the corresponding microstructure and element distribution between both adjacent layers were investigated. Mechanical properties and electrochemical corrosion resistance were subsequently measured and analyzed. Results indicated that there were equiaxed dendrites and netlike eutectic structures at the interfaces between both adjacent layers of multilayer cladding, making the alloying elements more evenly distributed due to the addition of excess Ni element. Furthermore, the introduction and increment of Ni element to the Fe-based alloy significantly improved the impact toughness, and exhibited higher corrosion resistance of the cladding coatings.
Fast radio bursts (FRBs) are highly dispersed, millisecond-duration radio bursts1-3. Recent observations of a Galactic FRB4-8 suggest that at least some FRBs originate from magnetars, but the origin ...of cosmological FRBs is still not settled. Here we report the detection of1,863 bursts in 82 h over 54 days from the repeating source FRB 20201124A (ref.9). These observations show irregular short-time variation ofthe Faraday rotation measure (RM), which scrutinizes the density-weighted line-of-sight magnetic field strength, of individual bursts during the first 36 days, followed by a constant RM. We detected circular polarization in more than half of the burst sample, including one burst reaching a high fractional circular polarization of 75%. Oscillations in fractional linear and circular polarizations, as well as polarization angle as a function of wavelength, were detected. All of these features provide evidence for a complicated, dynamically evolving, magnetized immediate environment within about an astronomical unit (au; Earth-Sun distance) ofthe source. Our optical observations of its Milky-Way-sized, metal-rich host galaxy10-12 show a barred spiral, with the FRB source residing in a low-stellar-density interarm region at an intermediate galactocentric distance. This environment is inconsistent with a young magnetar engine formed during an extreme explosion of a massive star that resulted in a long gamma-ray burst or superluminous supernova.
Using data samples collected with the BESIII detector operating at the BEPCII storage ring, we measure the cross sections of the e + e − → π + π − D + D − process at center-of-mass energies from ...4.190 to 4.946 GeV with a partial reconstruction method. Resonance structures are seen and the cross section line shape can be described by the coherent sum of either two Breit-Wigner functions or a Breit-Wigner function and a phase space term. The mass and width of the resonance at about 4.4 GeV are determined to be (4371.6±2.5±9.2) MeV/c 2 and (167±4±29) MeV, respectively, which are in agreement with those of the ψ(4360) or Y(4390) state. The spin-3D-wave charmonium state X(3842) is searched for through the e + e − → π + π − X(3842) → π + π − D + D − process, and evidence with a significance of 4.2σ is found in the data samples with center-of-mass energies from 4.6 to 4.7 GeV.
PDF
