Developing electrolytes that enable commercially viable lithium metal anodes for rechargeable lithium batteries remains challenging, despite recent exhaustive efforts. Electrolytes of similar ...composition, yet different structure, have been investigated to understand key mechanisms for improving the cycling performance of lithium metal anodes. Specifically, the electrolytes investigated include LiPF 6 , LiBF 4 , lithium bis(oxalato)borate (LiBOB), and lithium difluoro(oxalato)borate (LiDFOB) dissolved in a mixture of ethylene carbonate (EC) and ethyl methyl carbonate (EMC). There is a remarkable difference in the cycling performance of 1.2 M LiDFOB in EC : EMC (3 : 7) compared to 0.6 M LiBF 4 + 0.6 M LiBOB in EC : EMC (3 : 7), despite the effectively equivalent chemical composition. The LiDFOB electrolyte has significantly better cycling performance. Furthermore, the chemical compositions of the SEI generated on the lithium metal electrode from the two electrolytes are very similar, especially after the 1st plating, suggesting that the chemical composition of the SEI may not be the primary source for the difference in cycling performance. Ex situ transmission electron microscopy (TEM) reveals that the difference in cycling performance can be traced to the presence of nanostructured LiF particles in the SEI from the LiDFOB electrolyte. It is proposed that the capping ability of the oxalate moiety from LiDFOB, in combination with simultaneous generation of LiF, leads to generation of uniform and evenly distributed nanostructured LiF particles. The presence of nanostructured LiF in the SEI results in uniform diffusion field gradients on the lithium electrode which leads to improved cycling performance. The proposed mechanism not only provides insight for improving lithium metal anodes for batteries, but also expands upon the understanding of the role of LiF in the SEI on graphite electrodes in commercial lithium ion batteries. A superior understanding of the structure and function of the SEI will facilitate the development of next-generation energy storage systems.
The high energy density required for the next generation of lithium batteries will likely be enabled by a shift toward lithium metal anode from the conventional intercalation‐based anode such as ...graphite. However, several critical challenges for Li metal originate from its highly reactive nature and the hostless reaction of deposition and stripping impede the practical use of Li metal as an anode. The role of the solid electrolyte interphase (SEI) is very important for the Li metal anode where the SEI must protect the dynamically changing surface of the Li metal. Since the SEI‐generating reaction mechanisms for the two different electrolyte systems, liquid and solid, are considerably different, the SEI layers formed between the Li metal and the electrolytes in the two electrolyte systems have substantially different properties, causing different interfacial issues. Inhibition of the interfacial problems requires different strategies to reinforce the SEI layer for each of the electrolyte systems. However, the differences in the two electrolyte systems have not been clearly compared in the prior literature. In this report, the interfacial issues for the two different electrolyte systems are compared and different strategies for SEI modification are provided to overcome the issues.
Lithium metal anodes face different interfacial issues in liquid electrolyte and solid electrolyte systems. To overcome the interfacial problems, modification strategies of solid electrolyte interphases (SEI) should be different in each system. This perspective article illuminates the interfacial issues and discusses the strategies of SEI modification in each electrolyte system.
The anode solid electrolyte interface (SEI) on the anode of lithium ion batteries contains lithium carbonate (Li2CO3), lithium methyl carbonate (LMC), and lithium ethylene dicarbonate (LEDC). The ...development of a strong physical understanding of the properties of the SEI requires a strong understanding of the evolution of the SEI composition over extended timeframes. The thermal stability of Li2CO3, LMC, and LEDC in the presence of LiPF6 in dimethyl carbonate (DMC), a common salt and solvent, respectively, in lithium ion battery electrolytes, has been investigated to afford a better understanding of the evolution of the SEI. The residual solids from the reaction mixtures have been characterized by a combination of X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy with attenuated total reflectance (IR-ATR), while the solution and evolved gases have been investigated by nuclear magnetic resonance (NMR) spectroscopy and gas chromatography with mass selective detection (GC-MS). The thermal decomposition of Li2CO3 and LiPF6 in DMC yields CO2, LiF, and F2PO2Li. The thermal decomposition of LMC and LEDC with LiPF6 in DMC results in the generation of a complicated mixture including CO2, LiF, ethers, phosphates, and fluorophosphates.
The surface reactions of electrolytes with a silicon anode in lithium ion cells have been investigated. The investigation utilizes two novel techniques that are enabled by the use of binder-free ...silicon (BF-Si) nanoparticle anodes. The first method, transmission electron microscopy with energy dispersive X-ray spectroscopy, allows straightforward analysis of the BF-Si solid electrolyte interphase (SEI). The second method utilizes multi-nuclear magnetic resonance spectroscopy of D2O extracts from the cycled anodes. The TEM and NMR data are complemented by XPS and FTIR data, which are routinely used for SEI studies. Coin cells (BF-Si/Li) were cycled in electrolytes containing LiPF6 salt and ethylene carbonate or fluoroethylene carbonate solvent. Capacity retention was significantly better for cells cycled with LiPF6/FEC electrolyte than for cells cycled with LiPF6/EC electrolyte. Our unique combination of techniques establishes that for LiPF6/EC electrolyte the BF-Si SEI continuously grows during the first 20 cycles and the SEI becomes integrated with the BF-Si nanoparticles. The SEI predominantly contains lithium ethylene dicarbonate, LiF, and Li x SiO y . BF-Si electrodes cycled with LiPF6/FEC electrolyte have a different behavior; the BF-Si nanoparticles remain relatively distinct from the SEI. The SEI predominantly contains LiF, Li x SiO y , and an insoluble polymeric species.
The structure and composition of lithium ion solvation spheres of electrolyte solutions composed of common lithium salts (LiTFSI, LiPF6, LiBF4, and LiClO4) dissolved in aprotic polar linear and ...cyclic carbonate solvents (propylene carbonate (PC) or dimethyl carbonate (DMC)) have been investigated via a combination of FTIR, 13C NMR spectroscopy, and density functional theory (DFT). Results from the two different spectroscopic methods are in strong agreement with each other and with predictions from quantum chemistry calculations. The coordination of the carbonyl oxygen of the solvents to the lithium cation is observed by IR spectroscopy. The ratio of coordinated to uncoordinated PC and DMC has been used to determine solvent coordination numbers which range from 2 to 5 depending on salt, solvent, and concentration. The relative stability of the lithium–anion solvates were examined using DFT employing the cluster-continuum approach including changes to the intensity and frequency of the IR bands along with the populations of the cis–cis and cis–trans conformers of DMC in the lithium ion solvation shell. Solvent coordination is dependent upon the nature of the salt. Weakly associating salts, LiTFSI, LiPF6, and LiClO4, dissociate to a similar degree with LiPF6 being the most dissociated, while LiBF4 had significantly less dissociation in both solvents. This investigation provides significant insight into the solution structure of commonly used LIB electrolytes over a wide range of salt concentrations.
We have synthesized the products of fluoroethylene carbonate (FEC) and vinylene carbonate (VC) via lithium naphthalenide reduction. By analyzing the resulting solid precipitates and gas evolution, ...our results confirm that both FEC and VC decomposition products include HCO2Li, Li2C2O4, Li2CO3, and polymerized VC. For FEC, our experimental data supports a reduction mechanism where FEC reduces to form VC and LiF, followed by subsequent VC reduction. In the FEC reduction product, HCO2Li, Li2C2O4, and Li2CO3 were found in smaller quantities than in the VC reduction product, with no additional fluorine environments being detected by solid-state nuclear magnetic resonance or X-ray photoelectron spectroscopy analysis. With these additives being practically used in higher (FEC) and lower (VC) concentrations in the base electrolytes of lithium-ion batteries, our results suggest that the different relative ratios of the inorganic and organic reduction products formed by their decomposition may be relevant to the chemical composition and morphology of the solid electrolyte interphase formed in their presence.
Metallic lithium (Li) has great potential as an anode material for high-energy-density batteries due to its high specific capacity. However, the uncontrollable dendritic lithium growth on the ...metallic lithium surface limits its practical application owing to the instability of the solid electrolyte interphase (SEI). A tailored SEI composition/structure can mitigate or inhibit the lithium dendrites’ growth, thereby enhancing the cyclability of the Li-metal anode. In this work, excellent cycling stability of lithium metal anodes was achieved by utilizing a novel dual-salt electrolyte based on lithium bis(fluorosulfonyl) imide (LiFSI) and lithium difluorobis(oxalato) phosphate (LiDFBOP) in carbonate solvents. By combining surface/microstructural characterization and computations, we reveal that the preferential reduction of LiDFBOP occurs prior to LiFSI and carbonate solvents and its reduction products (Li2C2O4 and P–O species) bind to LiF, resulting in a favorable compact and protective SEI on the Li electrodes. It was found that the improved oxidative stability was accompanied by reduced corrosion of the current collector. A Li/Li symmetrical cell with a designed dual-salt electrolyte system exhibits stable polarization voltage over 1000 h of cycle time. In addition, the LiFSI–LiDFBOP advantage of this dual-salt electrolyte system enables the Li/LiFePO4 cells with significantly enhanced cycling stability. This work demonstrates that constructing a tailored SEI using a dual-salt electrolyte system is vital for improving the interfacial stability of lithium metal batteries.
The solution structures of organic carbonate solvents (ethylene carbonate (EC), propylene carbonate (PC), dimethyl carbonate (DMC), and diethyl carbonate (DEC)) as electrolyte solutions of LiPF6 were ...investigated with FTIR and NMR spectroscopy and DFT computational methods. Both coordinated and uncoordinated solvents are observed by IR spectroscopy, allowing the determination of solvent coordination numbers, which a range from 2 to 5. The predominant species in solution changes as a function of LiPF6 concentration. At low salt concentrations (<1.2 M), the predominant species is a solvent-separated ion pair, whereas at high salt concentrations (>2.0 M) the predominant species in solution is the contact ion pair. In mixed solvent systems (PC–DMC, PC–DEC, EC–DMC, or EC–DEC), the mixed solvated cations are observed in the presence of high concentrations of uncoordinated cyclic carbonate despite the much larger dielectric constant of the cyclic carbonates than dielectric constant of linear carbonate.
The surface reactions of electrolytes with the graphitic anode of lithium ion batteries have been investigated. The investigation utilizes two novel techniques, which are enabled by the use of ...binder-free graphite anodes. The first method, transmission electron microscopy (TEM) with energy dispersive X-ray spectroscopy, allows straightforward analysis of the graphite solid electrolyte interphase (SEI). The second method utilizes multi-nuclear magnetic resonance (NMR) spectroscopy of D2O extracts from the cycled anodes. The TEM and NMR data are complemented by XPS and FTIR data, which are routinely used for SEI studies. Cells were cycled with LiPF6 and ethylene carbonate (EC), ethyl methyl carbonate (EMC), and EC/EMC blends. This unique combination of techniques establishes that for EC/LiPF6 electrolytes, the graphite SEI is ∼50 nm thick after the first full lithiation cycle, and predominantly contains lithium ethylene dicarbonate (LEDC) and LiF. In cells containing EMC/LiPF6 electrolytes, the graphite SEI is nonuniform, ∼10–20 nm thick, and contains lithium ethyl carbonate (LEC), lithium methyl carbonate (LMC), and LiF. In cells containing EC/EMC/LiPF6 electrolytes, the graphite SEI is ∼50 nm thick, and predominantly contains LEDC, LMC, and LiF.
Thermal behavior of the solid electrolyte interphase (SEI) on a silicon electrode for lithium ion batteries has been investigated by TGA. In order to provide a better understanding of the thermal ...decomposition of the SEI on silicon, the thermal decomposition behavior of independently synthesized lithium ethylene dicarbonate (LEDC) was investigated as a model SEI. The model SEI (LEDC) has three stages of thermal decomposition. Over the temperature range of 50–300 °C, LEDC decomposes to evolve CO2 and C2H4 gases leaving lithium propionate (CH3CH2CO2Li) and Li2CO3 as solid residues. The lithium propionate decomposes over the temperature range of 300–600 °C to evolve pentanone leaving Li2CO3 as a residual solid. Finally, the Li2CO3 decomposes over 600 °C to evolve CO2 leaving Li2O as a residual solid. A very similar thermal decomposition process is observed for the SEI generated on cycled silicon electrodes. However, two additional thermal decomposition reactions were observed characteristic of Li x PO y F z at 300 °C and the polyimide binder at 550 °C. TGA measurements of Si electrodes after various numbers of cycles suggest that the LEDC on Si electrodes thermally decomposes during cycling to form lithium propionate and Li2CO3, resulting in increased complexity of the SEI.
PDF
