Since the discovery of graphene, there is an increasing amount of research devoted to graphene materials, namely, graphene nanoribbons (GNRs). The “top-down” production of narrow (<10 nm wide), ...unoxidized, and easily processable GNRs with atomically precise edges is challenging, and therefore, new methods need to be developed. We have designed a “bottom-up” approach for the synthesis of very narrow (ca. 0.5 nm) and soluble GNRs using a nonoxidative alkyne benzannulation strategy promoted by Brønsted acid. Suzuki polymerization was used to produce the GNR precursor, a poly(2,6-dialkynyl-p-phenylene) (PDAPP), with a weight-average molecular weight of 37.6 kg mol–1. Cyclization of the ethynylaryl side chains on PDAPP was efficiently achieved using Brønsted acids to ultimately produce the GNRs. Infrared and Raman spectroscopic characterization of the GNRs matches very well with calculated results. The formation of the GNRs was also supported by transmission electron microscopy (TEM) and scanning tunneling microscopy (STM).
Helically Coiled Graphene Nanoribbons Daigle, Maxime; Miao, Dandan; Lucotti, Andrea ...
Angewandte Chemie International Edition,
May 22, 2017, Letnik:
56, Številka:
22
Journal Article
Recenzirano
Graphene is a zero‐gap, semiconducting 2D material that exhibits outstanding charge‐transport properties. One way to open a band gap and make graphene useful as a semiconducting material is to ...confine the electron delocalization in one dimension through the preparation of graphene nanoribbons (GNR). Although several methods have been reported so far, solution‐phase, bottom‐up synthesis is the most promising in terms of structural precision and large‐scale production. Herein, we report the synthesis of a well‐defined, helically coiled GNR from a polychlorinated poly(m‐phenylene) through a regioselective photochemical cyclodehydrochlorination (CDHC) reaction. The structure of the helical GNR was confirmed by 1H NMR, FT‐IR, XPS, TEM, and Raman spectroscopy. This Riemann surface‐like GNR has a band gap of 2.15 eV and is highly emissive in the visible region, both in solution and the solid state.
Made into ribbons: Helicene‐like graphene nanoribbons (HGNR) have been prepared through a regioselective photochemical cyclodehydrochlorination (CDHC) reaction from a polychlorinated polyphenylene precursor.
Surface-Enhanced Raman Scattering (SERS) can obtain the spectroscopic response of specific analytes. In controlled conditions, it is a powerful quantitative technique. However, often the sample and ...its SERS spectrum are complex. Pharmaceutical compounds in human biofluids with strong interfering signals from proteins and other biomolecules are a typical example. Among the techniques for drug dosage, SERS was reported to detect low drug concentrations, with analytical capability comparable to that of the assessed High-Performance Liquid Chromatography. Here, for the first time, we report the use of SERS for Therapeutic Drug Monitoring of the Anti-Epileptic Drug Perampanel (PER) in human saliva. We used inert substrates decorated with gold NPs deposited via Pulsed Laser Deposition as SERS sensors. We show that it is possible to detect PER in saliva via SERS after an optimized treatment of the saliva sample. Using a phase separation process, it is possible to extract all the diluted PER in saliva from the saliva phase to a chloroform phase. This allows us to detect PER in the saliva at initial concentrations of the order of 10
M, thus approaching those of clinical interest.
Bis(biphenyl)-capped polyynes are investigated to unveil the modulation of the electronic and optical properties of sp-hybridized carbon-atom wires (CAWs) capped with π-conjugated sp2 end groups. ...Raman and surface enhanced Raman spectroscopy experiments and density functional theory (DFT) calculations reveal structural changes from polyyne-like with alternating single–triple bonds toward cumulene-like with more equalized bonds as a consequence of the charge transfer occurring when wires interact with metallic nanoparticles. While polyynes have semiconducting electronic properties, a more equalized system tends to a cumulene-like structure characterized by a nearly metallic behavior. The effect of different sp2 end groups in driving a semiconductor-to-metal transition is investigated by DFT calculations on a series of CAWs capped with different terminations. We discuss how the modulation of the structural, electronic, and vibrational properties of the sp-carbon chain toward the metallic wire is not trivial and requires a suitable chemical design of the end group and control of charge transfer. These results provide a guideline for the design of novel sp–sp2 hybrid carbon nanosystems with tunable properties, where graphene-like and polyyne-like domains are closely interconnected. The capability to tune the final electronic or optical response of the material makes these hybrid sp–sp2 systems appealing for a future all-carbon-based science and technology.
Four different hexahelicenes, 5-aza-hexahelicene (1), hexahelicene (2), 2-methyl-hexahelicene (3), and 2-bromo-hexahelicene (4), were prepared and their enantiomers, which are stable at r.t., were ...separated. Vibrational circular dichroism (VCD) spectra were measured for compound 1; for all the compounds, electronic circular dichroism (ECD) and circularly polarized luminescence (CPL) spectra were recorded. Each type of experimental spectrum was compared with the corresponding theoretical spectrum, determined via Density Functional Theory (DFT). Following the recent papers by Nakai et al., this comparison allowed to identify some features related to the helicity and some other features typical of the substituent groups on the helical backbone. The Raman spectrum of compound 1 is also examined from this point of view.
n‐peri‐Acenes (n‐PAs) have gained interest as model systems of zigzag‐edged graphene nanoribbons for potential applications in nanoelectronics and spintronics. However, the synthesis of n‐PAs larger ...than peri‐tetracene remains challenging because of their intrinsic open‐shell character and high reactivity. Presented here is the synthesis of a hitherto unknown n‐PA, that is, peri‐heptacene (7‐PA), in which the reactive zigzag edges are kinetically protected with eight 4‐tBu‐C6H4 groups. The formation of 7‐PA is validated by high‐resolution mass spectrometry and in situ FT‐Raman spectroscopy. 7‐PA displays a narrow optical energy gap of 1.01 eV and exhibits persistent stability (t1/2≈25 min) under inert conditions. Moreover, electron‐spin resonance measurements and theoretical studies reveal that 7‐PA exhibits an open‐shell feature and a significant tetraradical character. This strategy could be considered a modular approach for the construction of next‐generation (3 N+1)‐PAs (where N≥3).
The synthesis of the hitherto unknown peri‐heptacene 7‐PA is demonstrated by a rational molecular design strategy in which the reactive zigzag edges are kinetically protected. The formation of 7‐PA is validated by high‐resolution mass spectrometry and in situ FT‐Raman spectroscopy. The open‐shell 7‐PA displays a narrow optical energy gap of 1.01 eV and exhibits a persistent stability (half‐life ≈25 min) under inert conditions.
Laser synthesis emerges as a suitable technique to produce ligand-free nanoparticles, alloys and functionalized nanomaterials for catalysis, imaging, biomedicine, energy and environmental ...applications. In the last decade, laser ablation and nanoparticle generation in liquids has proven to be a unique and efficient technique to generate, excite, fragment and conjugate a large variety of nanostructures in a scalable and clean way. In this work, we give an overview on the fundamentals of pulsed laser synthesis of nanocolloids and new information about its scalability towards selected applications. Biomedicine, catalysis and sensing are the application areas mainly discussed in this review, highlighting advantages of laser-synthesized nanoparticles for these types of applications and, once partially resolved, the limitations to the technique for large-scale applications.
Two different surface enhanced Raman scattering (SERS) sensors are described, tested and compared against the detection of 2-naphthalenethiol (2NPT, a volatile compound) in both solution state as ...well as vapor phase. The first sensor is based on an optical fiber properly modeled to induce the adhesion of colloidal Ag nanoparticles on its surface. Excitation and detection of the Raman signal is performed through the optical fiber that can be used as in situ probe for the detection of molecules adsorbed on the SERS sensitized surface. The second SERS sensor is based on nanostructured substrates consisting of Au nanoparticles produced by pulsed laser deposition in presence of a controlled Ar atmosphere. Details at the nanometer scale were observed by SEM and TEM imaging to understand the size and structure of the islands formed as a function of deposition parameters that were selected in order to maximize their SERS response. The sensitivity of the substrates to volatile species was tested by letting evaporate controlled drops of a methanol solution of 2NPT in a chamber of known volume, where the substrate was placed. After complete evaporation of the drops, this provided an in-situ environment suitable for vapor phase measurements at known concentration. SERS spectra were collected after exposing the substrates to the environment within the chamber (vapor phase measurements) or dipping them in a solution for condensed state measurements. The complete absence of the SH stretching peak in the SERS spectra proves the covalent bonding of 2NPT to the metal substrates via the sulfur atom. DFT calculations, including metal-sulfur interaction, provide a good description of the observed SERS spectra. The reported data allow concluding that our SERS substrates are suitable for detection of volatile compounds.
SERS, a clinical practice where medical doctors can monitor the drug concentration in biological fluids, has been proposed as a viable approach to therapeutic drug monitoring (TDM) of the ...antiepileptic drug Perampanel. The adoption of an acidic environment during the SERS experiments was found to be effective in enhancing the spectroscopic signal. In this work, we combine SERS experiments, conducted with a custom spinning cell in controlled acidic conditions, with DFT calculations aimed at investigating the possible protonated forms of Perampanel. The DFT-simulated Raman spectra of protonated Perampanel accounts for most of the observed SERS signals, thus explaining the effective role of protonation of the analyte. Our results suggest protonation as a viable approach to fostering SERS of alkaline drugs.
Graphene, nanotubes and other carbon nanostructures have shown potential as candidates for advanced technological applications due to the different coordination of carbon atoms and to the possibility ...of π-conjugation. In this context, atomic-scale wires comprised of sp-hybridized carbon atoms represent ideal 1D systems to potentially downscale devices to the atomic level. Carbon-atom wires (CAWs) can be arranged in two possible structures: a sequence of double bonds (cumulenes), resulting in a 1D metal, or an alternating sequence of single-triple bonds (polyynes), expected to show semiconducting properties. The electronic and optical properties of CAWs can be finely tuned by controlling the wire length (i.e., the number of carbon atoms) and the type of termination (e.g., atom, molecular group or nanostructure). Although linear, sp-hybridized carbon systems are still considered elusive and unstable materials, a number of nanostructures consisting of sp-carbon wires have been produced and characterized to date. In this short review, we present the main CAW synthesis techniques and stabilization strategies and we discuss the current status of the understanding of their structural, electronic and vibrational properties with particular attention to how these properties are related to one another. We focus on the use of vibrational spectroscopy to provide information on the structural and electronic properties of the system (e.g., determination of wire length). Moreover, by employing Raman spectroscopy and surface enhanced Raman scattering in combination with the support of first principles calculations, we show that a detailed understanding of the charge transfer between CAWs and metal nanoparticles may open the possibility to tune the electronic structure from alternating to equalized bonds.