When attempting to clean surfaces of dental root canals with laser-induced cavitation bubbles, the resulting cavitation oscillations are significantly prolonged due to friction on the cavity walls ...and other factors. Consequently, the collapses are less intense and the shock waves that are usually emitted following a bubble’s collapse are diminished or not present at all. A new technique of synchronized laser-pulse delivery intended to enhance the emission of shock waves from collapsed bubbles in fluid-filled endodontic canals is reported. A laser beam deflection probe, a high-speed camera, and shadow photography were used to characterize the induced photoacoustic phenomena during synchronized delivery of Er:YAG laser pulses in a confined volume of water. A shock wave enhancing technique was employed which consists of delivering a second laser pulse at a delay with regard to the first cavitation bubble-forming laser pulse. Influence of the delay between the first and second laser pulses on the generation of pressure and shock waves during the first bubble’s collapse was measured for different laser pulse energies and cavity volumes. Results show that the optimal delay between the two laser pulses is strongly correlated with the cavitation bubble’s oscillation period. Under optimal synchronization conditions, the growth of the second cavitation bubble was observed to accelerate the collapse of the first cavitation bubble, leading to a violent collapse, during which shock waves are emitted. Additionally, shock waves created by the accelerated collapse of the primary cavitation bubble and as well of the accompanying smaller secondary bubbles near the cavity walls were observed. The reported phenomena may have applications in improved laser cleaning of surfaces during laser-assisted dental root canal treatments.
Background and Objectives
In this study, we investigate the photothermal response of human hair using a pulsed laser source employed in the hair removal treatment. The purpose is to understand the ...dynamics behind the most common clinical practice to better define the salient features that may contribute to the efficiency of the process.
Study Design/Materials and Methods
Temperature changes of hair samples (dark brown color) from a human scalp (skin type Fitpatrick II) were measured by a thermal camera following irradiation with single and multiple neodymium: yttrium‐aluminum‐garnet (Nd:YAG) (1064 nm) and alexandrite (755 nm) laser pulses. Particularly, the hair was treated with an individual laser pulse of a sufficiently high fluence, or with a series of lower fluence laser pulses. We investigated the temperature increase in a broad range of fluence and number of pulses. From the data analysis we extrapolated important parameters such as thermal gain and threshold fluence that can be used for determining optimal parameters for the hair removal procedure. Our experimental investigations and hypothesis were supported by a numerical simulation of the light‐matter interaction in a skin‐hair model, and by optical transmittance measurements of the irradiated hair.
Results
An enhancement of the temperature response of the irradiated hair, that deviates from the linear behavior, is observed when hair is subjected to an individual laser pulse of a sufficiently high fluence or to a series of lower fluence laser pulses. Here, we defined the nonlinear and rapid temperature built‐up as an avalanche effect. We estimated the threshold fluence at which this process takes place to be at 10 and 2.5 J/cm2 for 1064 and 755 nm laser wavelengths, respectively. The thermal gain expressed by the degree of the deviation from the linear behavior can be higher than 2 when low laser fluence and multiple laser pulses are applied (n = 50). The comparison of the calculated gain for the two different laser wavelengths and the number of pulses reveals a much higher efficiency when low fluence and multiple pulses are delivered. The avalanche effect manifests when the hair temperature exceeds 45°C. The enhanced temperature increase during the subsequent delivery of laser pulses could be ascribed to the temperature‐induced changes in the hair's structural properties. Simulations of the hair temperature under Nd:YAG and alexandrite irradiation indicate that the avalanche phenomenon observed in the hair suspended in air may apply also to the hair located within the skin matrix. Namely, for the same fluence, similar temperature increase was obtained also for the hair located within the skin.
Conclusion
The observed “avalanche” effect may contribute to the reported clinical efficacy of laser hair removal and may at least partially explain the observed efficacy of the brushing hair removal procedures where laser fluence is usually low. The repeated irradiation during the brushing procedure may lead to an avalanche‐like gradual increase of the hair's thermal response resulting in sufficiently high final hair temperatures as required for effective hair reduction.
Laser-enhanced irrigation of complex root canals appears to be a very promising technique to improve the outcome of root canal treatment. This applies, in particular, if the technique can be ...effective at very low laser energies in irrigating not only the main canal but also the small lateral canals. This is important in order to avoid potential undesirable effects at higher laser energies such as temperature increase, dentin ablation, or extrusion of irrigating solution beyond the apical foramen. An improved understanding of the role of laser parameters, such as laser wavelength and pulse duration, in irrigation of lateral canals is therefore desired in order to optimize treatment efficacy. The influence of laser wavelength and pulse duration on cavitation phenomena was studied using shadow photography and a method of measuring fluid flow in lateral canals based on tracking of movements of small air bubbles naturally forming in liquid as a result of laser agitation. A simulated model of a root canal including a narrow lateral canal designed to represent typical root canal morphology was used for the water flow measurements. The following three laser wavelengths with relatively high absorption in water were studied: Er:YAG (2.94 μm), Er,Cr:YSGG (2.73 μm), and Nd:YAP (1.34 μm). Among the three wavelengths studied, the Er:YAG laser wavelength was found to be the most effective in formation of cavitation bubbles and in generating fluid motions within narrow lateral canals. A comparison between the shadow photography and fluid motion data indicates that it is the bubble's radius and not the bubble's volume that predominantly influences the fluid motion within lateral canals. Based on the results of our study, it appears that effective minimally invasive laser-assisted irrigation can be performed with low Er:YAG laser pulse energies below 10 mJ.
A method for amplification of high-intensity pressure waves generated with a multi-pulsed Nd:YAG laser coupled with a black-TiOx optoacoustic lens in the water is presented and characterized. The ...investigation was focused on determining how the multi-pulsed laser excitation with delays between 50 µs and 400 µs influences the dynamics of the bubbles formed by a laser-induced breakdown on the upper surface of the lens, the acoustic cavitation in the focal region of the lens, and the high-intensity pressure waves generation. A needle hydrophone and a high-speed camera were used to analyze the spatial distribution and time-dependent development of the above-mentioned phenomena. Our results show how different delays ( t d ) of the laser pulses influence optoacoustic dynamics. When t d is equal to or greater than the bubble oscillation time, acoustic cavitation cloud size increases 10-fold after the fourth laser pulse, while the pressure amplitude increases by more than 75%. A quasi-deterministic creation of cavitation due to consecutive transient pressure waves is also discussed. This is relevant for localized ablative laser therapy.
To evaluate apical extrusion during a novel erbium-doped yttrium aluminum garnet (Er:YAG) laser-activated irrigation (LAI) modality.
: A novel double-pulse Er:YAG modality (AutoSWEEPS) was introduced ...recently, replacing a single laser pulse with two micropulses that are separated by a varying time delay (which is continuously "swept" between 300 and 600 μsec). Although the proposed method demonstrated increased efficacy, no data were yet available on extrusion.
The extrusion was evaluated on simulated canals (
= 6) using particle imaging velocimetry. In the first two groups, the irrigation device was a syringe coupled to either a 30-G open-ended or side-vented needle, with flow rates of 1, 2, 5, and 15 mL/min. In the second two groups, irrigant activation was performed with an Er:YAG laser, using either a super-short pulse (SSP) or AutoSWEEPS modality. The pulse energies were 5, 10, 20, 30, and 40 mJ and the frequency was 10 Hz.
The measured extrusion was most prominent during the open-ended needle irrigation, followed by the vented needle irrigation. Compared with the conventional needle irrigation (CNI), all the studied LAI modalities resulted in ∼3-20 times less extrusion. The AutoSWEEPS modality induced the smallest extrusion rate, which was always <1.5 mm
/sec and was also independent of the laser energy.
Within the limitations of the study, our results demonstrate that the SSP and AutoSWEEPS laser-assisted irrigation methods exhibited less extrusion in comparison with CNI methods.