The gravity field maps of the satellite gravimetry missions Gravity Recovery and Climate Experiment (GRACE ) and GRACE Follow-On are derived by means of precise orbit determination. The key ...observation is the biased inter-satellite range, which is measured primarily by a K-Band Ranging system (KBR) in GRACE and GRACE Follow-On. The GRACE Follow-On satellites are additionally equipped with a Laser Ranging Interferometer (LRI), which provides measurements with lower noise compared to the KBR. The biased range of KBR and LRI needs to be converted for gravity field recovery into an instantaneous range, i.e. the biased Euclidean distance between the satellites’ center-of-mass at the same time. One contributor to the difference between measured and instantaneous range arises due to the nonzero travel time of electro-magnetic waves between the spacecraft. We revisit the calculation of the light time correction (LTC) from first principles considering general relativistic effects and state-of-the-art models of Earth’s potential field. The novel analytical expressions for the LTC of KBR and LRI can circumvent numerical limitations of the classical approach. The dependency of the LTC on geopotential models and on the parameterization is studied, and afterwards the results are compared against the LTC provided in the official datasets of GRACE and GRACE Follow-On. It is shown that the new approach has a significantly lower noise, well below the instrument noise of current instruments, especially relevant for the LRI, and even if used with kinematic orbit products. This allows calculating the LTC accurate enough even for the next generation of gravimetric missions.
The GRACE follow-on satellites carry the very first interspacecraft Laser Ranging Interferometer (LRI). After more than four years in orbit, the LRI outperforms the sensitivity of the conventional ...Microwave Instrument (MWI). However, in the current data processing scheme, the LRI product still needs the MWI data to determine the unknown absolute laser frequency, representing the “ruler” for converting the raw phase measurements into a physical displacement in meters. In this paper, we derive formulas for precisely performing that conversion from the phase measurement into a range, accounting for a varying carrier frequency. Furthermore, the dominant errors due to knowledge uncertainty of the carrier frequency as well as uncorrected time biases are derived. In the second part, we address the dependency of the LRI on the MWI in the currently employed cross-calibration scheme and present three different models for the LRI laser frequency, two of which are largely independent of the MWI. Furthermore, we analyze the contribution of thermal variations on the scale factor estimates and the LRI-MWI residuals. A linear model called Thermal Coupling (TC) is derived, which significantly reduces the differences between LRI and MWI to a level where the MWI observations limit the comparison.
The GRACE Follow-On satellite mission measures distance variations between its two satellites in order to derive monthly gravity field maps, indicating mass variability on Earth on a scale of a few ...100 km originating from hydrology, seismology, climatology and other sources. This mission hosts two ranging instruments, a conventional microwave system based on K(a)-band ranging (KBR) and a novel laser ranging instrument (LRI), both relying on interferometric phase readout. In this paper, we show how the phase measurements can be converted into range data using a time-dependent carrier frequency (or wavelength) that takes into account potential intraday variability in the microwave or laser frequency. Moreover, we analyze the KBR-LRI residuals and discuss which error and noise contributors limit the residuals at high and low Fourier frequencies. It turns out that the agreement between KBR and LRI biased range observations can be slightly improved by considering intraday carrier frequency variations in the processing. Although the effect is probably small enough to have little relevance for gravity field determination at the current precision level, this analysis is of relevance for detailed instrument characterization and potentially for future more precise missions.
The laser ranging interferometer onboard the Gravity Recovery and Climate Experiment Follow-On mission proved the feasibility of an interferometric sensor for inter-satellite length tracking with ...sub-nanometer precision, establishing an important milestone for space laser interferometry and the general expectation that future gravity missions will employ heterodyne laser interferometry for satellite-to-satellite ranging. In this paper, we present the design of an on-axis optical bench for next-generation laser ranging which enhances the received optical power and the transmit beam divergence, enabling longer interferometer arms and relaxing the optical power requirement of the laser assembly. All design functionalities and requirements are verified by means of computer simulations. A thermal analysis is carried out to investigate the robustness of the proposed optical bench to the temperature fluctuations found in orbit.
The precise tracking of distance variations between two satellites in low Earth orbit can provide key data for the understanding of the Earth’s system, specifically on seasonal and sub-seasonal water ...cycles and their impact on water levels. Measured distance variations, caused by local variations in gravitational field, serve as inputs to complex gravity models with which the movement of water on the globe can be identified. Satellite missions GOCE (2009–2013) and GRACE (2002–2017) delivered a significant improvement to our understanding of spatial and temporal gravity variations. Since 2018, GRACE Follow-On has been providing data continuity and features for the first time through the use of a laser interferometer as the technology demonstrator, in addition to a microwave ranging system as the main instrument. The laser interferometer provides an orders-of-magnitude lower measurement noise, and thereby could enable a significant improvement in the measurement of geoids if combined with suitable improvements in auxiliary instrumentation and Earth system modelling. In order to exploit the improved ranging performance, the ESA is investigating the design of a ‘Next Generation Gravity Mission’, consisting of two pairs of satellites with laser interferometers, improved accelerometers and improved platform performance. In this paper, we present the current design of the laser interferometer developed by us, the development status of the individual instrument units and the options available.
Monthly gravity field recovery using data from the GRACE and GRACE Follow‐On missions includes errors limiting the spatial and temporal resolution of the estimated gravity fields. The major error ...contributions, besides the noise of the accelerometer instruments, arise from temporal aliasing errors due to imperfections in the non‐tidal atmospheric and oceanic de‐aliasing models and ocean tide models. We derive uncertainty information for the eight major tidal constituents from five different ocean tide models and introduce it into the gravity field recovery process in terms of a constrained normal equation system while expanding the parameter space by additional tidal parameters to be adjusted. We prove the effectiveness of the ocean tide variance‐covariance information through realistic simulations and we assess its potential based on microwave and laser interferometer observations from the GRACE Follow‐On mission. We show that errors are reduced by more than 20% ocean wRMS for a Gaussian filter radius of 300 km if uncertainty information for ocean tides is considered and stochastic modeling of instrument errors is applied, compared to the latest GFZ release 6.1. Our results also show the limited visibility of the effectiveness of the ocean tide variance‐covariance information due to the dominating error contribution of non‐tidal atmospheric and oceanic mass variations. Additionally, we investigate the option of estimating ocean tide parameters over a 1‐year period while including ocean tide uncertainty information in order to improve ocean tide background modeling.
Key Points
Application of variance‐covariance information from ocean tide models in Level‐2 satellite gravity field processing
Reduction of temporal aliasing errors due to ocean tides in time‐varying gravity field solutions
Estimation of ocean tide parameters for an improved ocean tide background modeling
The GRACE Follow-On mission will monitor fluctuations in Earth's geoid using, for the first time, a Laser Ranging Interferometer to measure intersatellite distance changes. We have investigated the ...coupling between spacecraft rotation and the intersatellite range measurement that is incurred due to manufacturing and assembly tolerances of the Triple Mirror Assembly (TMA), a precision retroreflector to ensure alignment between in- and outgoing laser beams. The three TMA mirror planes intersect in a virtual vertex to which satellite displacements are referenced. TMA manufacturing tolerances degrade this ideal vertex, however, a Point of Minimal Coupling (PMC) between spacecraft rotation and displacement exists. This paper presents the experimental location of the PMC under pitch and yaw rotations for a prototype TMA. Rotations are performed using a hexapod, while displacements are monitored with heterodyne laser interferometry to verify the PMC position. Additionally, the vertex of the three TMA mirror planes is measured using a Coordinate Measuring Machine and compared to the PMC position. In the pitch and yaw axes, the biggest deviation between TMA vertex and PMC was 50 ± 64 μm. Thus, within the measurement uncertainties, no difference between TMA vertex and PMC could be observed. This is a key piece of information for integration of the TMA into the spacecraft: It is sufficient to use the readily-available TMA vertex location to ensure minimal rotation-to-displacement coupling during the mission.
The Gravity Recovery and Climate Experiment (GRACE) mission has yielded data on the Earth's gravity field to monitor temporal changes for more than 15 years. The GRACE twin satellites use microwave ...ranging with micrometre precision to measure the distance variations between two satellites caused by the Earth's global gravitational field. GRACE Follow-on (GRACE-FO) will be the first satellite mission to use inter-satellite laser interferometry in space. The laser ranging instrument (LRI) will provide two additional measurements compared to the GRACE mission: interferometric inter-satellite ranging with nanometre precision and inter-satellite pointing information. We have designed a set of simulated GRACE-FO data, which include LRI measurements, apart from all other GRACE instrument data needed for the Earth's gravity field recovery. The simulated data files are publicly available via https://doi.org/10.22027/AMDC2 and can be used to derive gravity field solutions like from GRACE data. This paper describes the scientific basis and technical approaches used to simulate the GRACE-FO instrument data.