Collagen represents one of the most widely used biomaterial for scaffolds fabrication in tissue engineering as it represents the mechanical support of natural tissues. It also provides physical ...scaffolding for cells and it influences their attachment, growth, and tissue regeneration. Among all fibrillary collagens, type I is considered one of the gold standard for scaffolds fabrication, thanks to its high biocompatibility, biodegradability, and hemostatic properties. It can be extracted by chemical and enzymatic protocols from several collagen‐rich tissues, such as tendon and skin, of different animal species. Both the extraction processes and the manufacturing protocols for scaffolds fabrication provide structural and mechanical changes that can be tuned in order to deeply impact the properties of the final biomaterial. The aim of this review is to discuss the role of X‐rays to study structural changes of type I collagen from fresh collagen‐rich tissues (bovine, equine, fish) to the final scaffolds, with the aim to screen across available collagen sources and scaffolds fabrication protocols to be used in tissue regeneration.
Bovine, equine, tilapia fish type I collagen are studied by wide and small angle X‐ray scattering to evaluate the multilevel structure of raw materials and final scaffolds, and to screen across collagen sources and scaffolds fabrication protocols available for tissue engineering.
Agricultural pesticides can become persistent environmental pollutants and their use is destined to be reduced. Consequently, weed control is shifting to green products and strategies. A combined ...approach, made of pelargonic acid based herbicide spraying and interspecific competition (i.e. seeding of plants species competing for growth against weeds) could boost the weeding effect. In case of the contemporary seeding and spraying, needed to reduce costs, seed coating is necessary as barrier to herbicide toxic effects but, at the same time, the coating has to be endowed with the right features to allow germination. This work aims to verify the feasibility of using cellulose acetate/cardanol (CA/Card) as seed coating polymer–plasticizer blend and to identify possible relationship between material features and germination rate. For these purposes, untreated and pelargonic acid herbicide treated coated seeds coated through solvent evaporation methods (CA/Card ratios from 0/0 to 100/0) were subjected to germination test. Coatings were characterized through SEM, EDX, media uptake, DSC and mechanical analysis with and without conditioning in seeding conditions. Germination test showed that 70/30 seeds, treated and untreated with herbicide, presented the best germination rate. Germination assays showed that coating presence reduced and slowed (without stopping) seeds germination equally with and without herbicide treatment. Consequently, was possible to conclude that CA/Card coatings allowed germination and presented a barrier effect against herbicide. Thus coating resulted suitable for seed coating in herbicide spraying/interspecific combined applications. No strong correlations were found between material features and germination, but it is plausible to hypothesize that both water absorption and mechanical properties of the coating play an important role and have to be optimized to improve germination rate avoiding difficulty in sprouting. Finally, the study opened a new perspective in the use of cellulose acetate for seed coating from waste sources such as cigarette filters.
Graphic Abstract
Scaffold's morphology and in particular pore architecture is a key parameter for cell viability and tissue regeneration. Usually, morphology is managed through Thermally Induced Phase Separation ...(TIPS) consisting of controlled quenching and freeze-drying to remove ice crystals to create porosity. Nevertheless, the so-called skin effect, a less-/non-porous layer, usually occurring at scaffold's air–liquid or material-mold interface. Skin effect reduces scaffold's performance then the layer have to cut out with consequent loss of material and damage risks. Here, it is presented a possible method to avoid skin effect at mold-polymer interface in biopolymer-based scaffolds. It is based on producing scaffolds not directly in a mold but on a previously frozen distilled water surface. SEM analysis showed the absence of skinned surfaces and a uniform pore pattern in shape and size.
•Standard thermally induced phase separation (TIPS) is modified in TIPS/ice method.•Porous CMC, SA and CMC+SA samples were obtained by using a TIPS/ice method.•TIPS/ice produced samples presented no skin effect.
The advancement achieved in Tissue Engineering is based on a careful and in-depth study of cell–tissue interactions. The choice of a specific biomaterial in Tissue Engineering is fundamental, as it ...represents an interface for adherent cells in the creation of a microenvironment suitable for cell growth and differentiation. The knowledge of the biochemical and biophysical properties of the extracellular matrix is a useful tool for the optimization of polymeric scaffolds. This review aims to analyse the chemical, physical, and biological parameters on which are possible to act in Tissue Engineering for the optimization of polymeric scaffolds and the most recent progress presented in this field, including the novelty in the modification of the scaffolds’ bulk and surface from a chemical and physical point of view to improve cell–biomaterial interaction. Moreover, we underline how understanding the impact of scaffolds on cell fate is of paramount importance for the successful advancement of Tissue Engineering. Finally, we conclude by reporting the future perspectives in this field in continuous development.
Magnesium (Mg)- and silicon (Si)-substituted hydroxyapatite (HA) scaffolds were synthesized using the sponge replica method. The influence of Mg2+ and SiO44− ion substitution on the microstructural, ...mechanical and biological properties of HA scaffolds was evaluated. All synthesized scaffolds exhibited porosity >92%, with interconnected pores and pore sizes ranging between 200 and 800 μm. X-ray diffraction analysis showed that β-TCP was formed in the case of Mg substitution. X-ray fluorescence mapping showed a homogeneous distribution of Mg and Si ions in the respective scaffolds. Compared to the pure HA scaffold, a reduced grain size was observed in the Mg- and Si-substituted scaffolds, which greatly influenced the mechanical properties of the scaffolds. Mechanical tests revealed better performance in HA-Mg (0.44 ± 0.05 MPa), HA-Si (0.64 ± 0.02 MPa) and HA-MgSi (0.53 ± 0.01 MPa) samples compared to pure HA (0.2 ± 0.01 MPa). During biodegradability tests in Tris-HCl, slight weight loss and a substantial reduction in mechanical performances of the scaffolds were observed. Cell proliferation determined by the MTT assay using hBMSC showed that all scaffolds were biocompatible, and the HA-MgSi scaffold seemed the most effective for cell adhesion and proliferation. Furthermore, ALP activity and osteogenic marker expression analysis revealed the ability of HA-Si and HA-MgSi scaffolds to promote osteoblast differentiation.
Biopolymer-based formulations show great promise in enhancing the effectiveness of entomopathogenic fungi as bioinsecticides. Chitosan and starch, among other biopolymers, have been utilized to ...improve spore delivery, persistence, and adherence to target insects. These formulations offer advantages such as target specificity, eco-friendliness, and sustainability. However, challenges related to production costs, stability, and shelf life need to be addressed. Recently, biomimetic lure and kill approaches based on biopolymers offer cost-effective solutions by leveraging natural attractants. Further research is needed to optimize these formulations and overcome challenges. Biopolymer-based formulations have the potential to revolutionize pest control practices, providing environmentally friendly and sustainable solutions for agriculture.
Aims/hypothesis
Impaired wound healing significantly impacts morbidity and mortality in diabetic patients, necessitating the development of novel treatments to improve the wound healing process. We ...here investigated the topical use of acellular embryonic stem cell extracts (EXTs) in wound healing in diabetic db/db mice.
Methods
Wounds were induced in diabetic db/db mice, which were subsequently treated with EXTs, with 3T3 fibroblast cell line protein extracts (3T3XTs) or with saline as a control. Pathology and mechanistic assays were then performed.
Results
The in vivo topical administration of EXTs facilitates wound closure, contraction and re-epithelialization. Moreover, EXTs reduced the number of wound-infiltrating CD45
+
inflammatory cells and increased the rate of repair and of angiogenesis as compared to controls. Interestingly, the EXT effect was partly enhanced by the use of a collagen-based biocompatible scaffold. In vivo, topical administration of EXTs increased the percentage of regulatory T cells in the wounded tissue, while in vitro EXT treatment reduced T cell-mediated IFN-γ production. Proteomic screening revealed 82 proteins differentially segregating in EXTs as compared to 3T3 extracts, with APEX1 identified as a key player for the observed immunomodulatory effect of EXTs.
Conclusions
EXTs are endowed with immunoregulatory and anti-inflammatory properties; their use improves wound healing in diabetic preclinical models.
In recent years, the enormous demand for swabs for clinical use has promoted their relevance and, consequently, brought the environmental issues due to their single use and lack of biodegradability ...to the attention of the healthcare industry. Swabs consist of a stick that facilitates their easy handling and manoeuvrability even in complex districts and an absorbent tip designed to uptake and release biological samples. In this study, we focused on the fabrication of an innovative biodegradable poly(vinyl alcohol) (PVA) nanofiber swab tip using the electrospinning technique. The innovative swab tip obtained showed comparable uptake and release capacity of protein and bacterial species (Pseudomonas aeruginosa and Staphylococcus aureus) with those of the commercial foam-type swab. In this way, the obtained swab can be attractive and suitable to fit into this panorama due to its low-cost process, easy scalability, and good uptake and release capabilities.
Periodontitis is a global, multifaceted, chronic inflammatory disease caused by bacterial microorganisms and an exaggerated host immune response that not only leads to the destruction of the ...periodontal apparatus but may also aggravate or promote the development of other systemic diseases. The periodontium is composed of four different tissues (alveolar bone, cementum, gingiva, and periodontal ligament) and various non-surgical and surgical therapies have been used to restore its normal function. However, due to the etiology of the disease and the heterogeneous nature of the periodontium components, complete regeneration is still a challenge. In this context, guided tissue/bone regeneration strategies in the field of tissue engineering and regenerative medicine have gained more and more interest, having as a goal the complete restoration of the periodontium and its functions. In particular, the use of electrospun nanofibrous scaffolds has emerged as an effective strategy to achieve this goal due to their ability to mimic the extracellular matrix and simultaneously exert antimicrobial, anti-inflammatory and regenerative activities. This review provides an overview of periodontal regeneration using electrospun membranes, highlighting the use of these nanofibrous scaffolds as delivery systems for bioactive molecules and drugs and their functionalization to promote periodontal regeneration.
An immunoencapsulation strategy for pancreatic islets aimed to reduce the risk of rejection in transplanted patients due to the immune response of the host organism is proposed. In this sense, a ...polyethylene glycol (PEG) hydrogel functionalized with an immunosuppressive antibody (Ab), such as Cytotoxic T-lymphocyte antigen-4 Ig (CTLA4-Ig), would act as both passive and active barrier to the host immune response. To demonstrate the feasibility of this approach, a photopolymerizable-PEG was conjugated to the selected antibody and the PEG-Ab complex was used to coat the islets. Moreover, to preserve the antigen-recognition site of the antibody during the conjugation process, a controlled immobilization method was setup through the attachment of the His-tagged antigen to a solid support. In detail, a gold-coated silicon wafer functionalized with 11-Mercaptoundecanoic acid was used as a substrate for further modification, leading to a nickel(II)-terminated ligand surface. Then, the immobilized antigen was recognized by the corresponding antibody that was conjugated to the PEG. The antibody-PEG complex was detached from the support prior to be photopolymerized around the islets. First, this immobilization method has been demonstrated for the green fluorescent protein (GFP)–anti-green fluorescent protein (Anti-GFP) antigen-antibody pair, as proof of principle. Then, the approach was extended to the immunorelevant B7-1 CTLA-4-Ig antigen-antibody pair, followed by the binding of Acryl-PEG to the immobilized constant region of the antibody. In both cases, after using an elution protocol, only a partial recovery of the antibody-PEG complex was obtained. Nevertheless, the viability and the functional activity of the encapsulated islets, as determined by the glucose-stimulated insulin secretion (GSIS) assay, showed the good compatibility of this approach.
PDF
