Improved solar cell efficiency is the key to ongoing photovoltaic cost reduction, particularly as economies of scale propel module-manufacturing costs towards largely immutable basic material costs ...and as installation costs become an increasingly large contributor to total system costs. To enable manufacturers to move past the 20% cell energy conversion efficiency figure in production, high-efficiency PERC (Passivated Emitter and Rear Cell) sequences are being increasingly brought online. Most new photovoltaic manufacturing capacity added in the second half of 2014 was PERC-based, making PERC now the cell technology with second-highest production capacity, with the latest industry roadmap anticipating PERC will become the dominant commercial cell technology by 2020. The first paper describing the PERC cell appeared in 1989, although the structure was conceived several years earlier. The attractive technical features were the reduction of rear surface recombination by a combination of dielectric surface passivation and reduced metal/semiconductor contact area while simultaneously increasing rear surface reflection by use of a dielectrically displaced rear metal reflector. The key issues in the development of this technology and its commercial implementation are described, including a review of recent adoption rates and the way these are likely to evolve in the future.
•Early history of PERC cells reported.•Key design features PERC identified.•Recent market introduction rate, costs and future prospects discussed.
Medical error is not included on death certificates or in rankings of cause of death. Martin Makary and Michael Daniel assess its contribution to mortality and call for better reporting
Like all obligately ectomycorrhizal plants, pines require ectomycorrhizal fungal symbionts to complete their life cycle. Pines introduced into regions far from their native range are typically ...incompatible with local ectomycorrhizal fungi, and, when they invade, coinvade with fungi from their native range. While the identities and distributions of coinvasive fungal symbionts of pine invasions are poorly known, communities that have been studied are notably depauperate. However, it is not yet clear whether any number of fungal coinvaders is able to support a Pinaceae invasion, or whether very depauperate communities are unable to invade. Here, we ask whether there is evidence for a minimum species richness of fungal symbionts necessary to support a pine/ectomycorrhizal fungus coinvasion. We sampled a Pinus contorta invasion front near Coyhaique, Chile, using molecular barcoding to identify ectomycorrhizal fungi. We report that the site has a total richness of four species, and that many invasive trees appear to be supported by only a single ectomycorrhizal fungus, Suillus luteus. We conclude that a single ectomycorrhizal (ECM) fungus can suffice to enable a pine invasion.
Advances in Bioconvection Bees, Martin A
Annual review of fluid mechanics,
01/2020, Letnik:
52, Številka:
1
Journal Article
Recenzirano
Odprti dostop
The term "bioconvection" describes hydrodynamic instabilities and patterns in suspensions of biased swimming microorganisms. Hydrodynamic instabilities arise from coupling between cell swimming ...behaviors; physical properties of the cells, such as density; and fluid flows. For instance, a combination of viscous and gravitational torques can lead to cells swimming toward downwelling fluid. If the cells are more dense than the fluid, then a gyrotactic instability results. Phototaxis describes the directed response of cells to light, which can also lead to instability. Bioconvection represents a classic system where macroscopic phenomena arise from microscopic cellular behavior in relatively dilute systems. There are ecological consequences for bioconvection and the mechanisms involved as well as potential for industrial exploitation. The focus of this review is on progress measuring and modeling gyrotactic and phototactic bioconvection. It builds on two earlier reviews of bioconvection and recent interest in active matter, describing progress and highlighting open problems.
The kinetics of the esterification of free fatty acids (FFA) in sunflower oil with methanol in the presence of sulphuric acid at concentrations of 5 and 10
wt% relative to free acids as catalyst and ...methanol/oleic acid mole ratios from 10:1 to 80:1 was studied. The experimental results were found to fit a first-order kinetic law for the forward reaction and a second-order one for the reverse reaction.
The influence of temperature on the kinetic constants was determined by fitting the results to the Arrhenius equation. The energy of activation for the forward reaction decreased with increasing catalyst concentration from 50
745 to 44
559
J/mol.
Based on the experimental results, a methanol/oleic acid mole ratio of 60:1, a catalyst (sulphuric acid) concentration of 5
wt% and a temperature of 60
°C provided a final acid value for the oil lower than 1
mg
KOH/g oil within 120
min. This is a widely endorsed limit for efficient separation of glycerin and biodiesel during production of the latter.
Five Rules for the Evolution of Cooperation Nowak, Martin A
Science (American Association for the Advancement of Science),
12/2006, Letnik:
314, Številka:
5805
Journal Article
Recenzirano
Odprti dostop
Cooperation is needed for evolution to construct new levels of organization. Genomes, cells, multicellular organisms, social insects, and human society are all based on cooperation. Cooperation means ...that selfish replicators forgo some of their reproductive potential to help one another. But natural selection implies competition and therefore opposes cooperation unless a specific mechanism is at work. Here I discuss five mechanisms for the evolution of cooperation: kin selection, direct reciprocity, indirect reciprocity, network reciprocity, and group selection. For each mechanism, a simple rule is derived that specifies whether natural selection can lead to cooperation.
Fluid shear stress (FSS) from blood flow acting on the endothelium critically regulates vascular morphogenesis, blood pressure, and atherosclerosis 1. FSS applied to endothelial cells (ECs) triggers ...signaling events including opening of ion channels, activation of signaling pathways, and changes in gene expression. Elucidating how ECs sense flow is important for understanding both normal vascular function and disease. EC responses to FSS are mediated in part by a junctional mechanosensory complex consisting of VE-cadherin, PECAM-1, and VEGFR2 2. Previous work suggested that flow increases force on PECAM-1, which initiates signaling 2–4. Deletion of PECAM-1 blocks responses to flow in vitro and flow-dependent vascular remodeling in vivo 2, 5. To understand this process, we developed and validated FRET-based tension sensors for VE-cadherin and PECAM-1 using our previously developed FRET tension biosensor 6. FRET measurements showed that in static culture, VE-cadherin in cell-cell junctions bears significant myosin-dependent tension, whereas there was no detectable tension on VE-cadherin outside of junctions. Onset of shear stress triggered a rapid (<30 s) decrease in tension across VE-cadherin, which paralleled a decrease in total cell-cell junctional tension. Flow triggered a simultaneous increase in tension across junctional PECAM-1, while nonjunctional PECAM-1 was unaffected. Tension on PECAM-1 was mediated by flow-stimulated association with vimentin. These data confirm the prediction that shear increases force on PECAM-1. However, they also argue against the current model of passive transfer of force through the cytoskeleton to the junctions 7, showing instead that flow triggers cytoskeletal remodeling, which alters forces across the junctional receptors.
Display omitted
•VE-cadherin is under myosin-dependent tension•Flow triggers decreased tension on VE-cadherin by reducing overall contractility•Flow triggers increased tension on PECAM-1 through attachment to vimentin•The data suggest that an unidentified upstream mechanosensor initiates signaling
The past five years have seen significant cost reductions in photovoltaics and a correspondingly strong increase in uptake, with photovoltaics now positioned to provide one of the lowest-cost options ...for future electricity generation. What is becoming clear as the industry develops is that area-related costs, such as costs of encapsulation and field-installation, are increasingly important components of the total costs of photovoltaic electricity generation, with this trend expected to continue. Improved energy-conversion efficiency directly reduces such costs, with increased manufacturing volume likely to drive down the additional costs associated with implementing higher efficiencies. This suggests the industry will evolve beyond the standard single-junction solar cells that currently dominate commercial production, where energy-conversion efficiencies are fundamentally constrained by Shockley-Queisser limits to practical values below 30%. This Review assesses the overall prospects for a range of approaches that can potentially exceed these limits, based on ultimate efficiency prospects, material requirements and developmental outlook.
Summary
Intra‐class correlations (ICC) and repeatabilities (R) are fundamental statistics for quantifying the reproducibility of measurements and for understanding the structure of biological ...variation. Linear mixed effects models offer a versatile framework for estimating ICC and R. However, while point estimation and significance testing by likelihood ratio tests is straightforward, the quantification of uncertainty is not as easily achieved.
A further complication arises when the analysis is conducted on data with non‐Gaussian distributions because the separation of the mean and the variance is less clear‐cut for non‐Gaussian than for Gaussian models. Nonetheless, there are solutions to approximate repeatability for the most widely used families of generalized linear mixed models (GLMMs).
Here, we introduce the R package rptR for the estimation of ICC and R for Gaussian, binomial and Poisson‐distributed data. Uncertainty in estimators is quantified by parametric bootstrapping and significance testing is implemented by likelihood ratio tests and through permutation of residuals. The package allows control for fixed effects and thus the estimation of adjusted repeatabilities (that remove fixed effect variance from the estimate) and enhanced agreement repeatabilities (that add fixed effect variance to the denominator). Furthermore, repeatability can be estimated from random‐slope models. The package features convenient summary and plotting functions.
Besides repeatabilities, the package also allows the quantification of coefficients of determination R2 as well as of raw variance components. We present an example analysis to demonstrate the core features and discuss some of the limitations of rptR.
PDF
