Muon radiography is a methodology which enables measuring the mass distribution within large objects. It exploits the abundant flux of cosmic muons and uses detectors with different technologies ...depending on the application. As the sensitive surface and geometric acceptance are two fundamental parameters for increasing the collection of muons, the optimization of the detectors is very significant. Here we show a potentially innovative detector of size and shape suitable to be inserted inside a borehole, that optimizes the sensitive area and maximizes the angular acceptance thanks to its cylindrical geometry obtained using plastic arc-shaped scintillators. Good spatial resolution is obtained with a reasonable number of channels. The dimensions of the detector make it ideal for use in 25 cm diameter wells. Detailed simulations based on Monte Carlo methods show great cavity detection capability. The detector has been tested in the laboratory, achieving overall excellent performance.
Volcanoes in Italy and the role of muon radiography D'Alessandro, Raffaello; Ambrosino, F; Baccani, G ...
Philosophical transactions of the Royal Society of London. Series A: Mathematical, physical, and engineering sciences,
12/2018, Letnik:
377, Številka:
2137
Journal Article
Recenzirano
Odprti dostop
Cosmic-ray muon radiography (muography), an imaging technique that can provide measurements of rock densities within the top few 100 m of a volcanic cone, has now achieved a spatial resolution of the ...order of 10 m in optimal detection conditions. Muography provides images of the top region of a volcano edifice with a resolution that is considerably better than that typically achieved with other conventional methods (i.e. gravimetric). We expect such precise measurements, to provide us with information on anomalies in the rock density distribution, which can be affected by dense lava conduits, low-density magma supply paths or the compression with the depth of the overlying soil. The MUon RAdiography of VESuvius (MURAVES) project is now in its final phase of construction and deployment. Up to four muon hodoscopes, each with a surface of roughly 1 m
, will be installed on the slope of Vesuvius and take data for at least 12 months. We will use the muographic profiles, combined with data from gravimetric and seismic measurement campaigns, to determine the stratigraphy of the lava plug at the bottom of the Vesuvius crater, in order to infer potential eruption pathways. While the MURAVES project unfolds, others are using emulsion detectors on Stromboli to study the lava conduits at the top of the volcano. These measurements are ongoing: they have completed two measurement campaigns and are now performing the first data analysis.This article is part of the Theo Murphy meeting issue 'Cosmic-ray muography'.
A double-phase argon Time Projection Chamber (TPC), with an active mass of 185 g, has been designed and constructed for the Recoil Directionality (ReD) experiment. The aim of the ReD project is to ...investigate the directional sensitivity of argon-based TPCs via columnar recombination to nuclear recoils in the energy range of interest (20–
200
keV
nr
) for direct dark matter searches. The key novel feature of the ReD TPC is a readout system based on cryogenic Silicon Photomultipliers (SiPMs), which are employed and operated continuously for the first time in an argon TPC. Over the course of 6 months, the ReD TPC was commissioned and characterised under various operating conditions using
γ
-ray and neutron sources, demonstrating remarkable stability of the optical sensors and reproducibility of the results. The scintillation gain and ionisation amplification of the TPC were measured to be
g
1
=
(
0.194
±
0.013
)
photoelectrons/photon and
g
2
=
(
20.0
±
0.9
)
photoelectrons/electron, respectively. The ratio of the ionisation to scintillation signals (S2/S1), instrumental for the positive identification of a candidate directional signal induced by WIMPs, has been investigated for both nuclear and electron recoils. At a drift field of 183 V/cm, an S2/S1 dispersion of 12% was measured for nuclear recoils of approximately 60–
90
keV
nr
, as compared to 18% for electron recoils depositing 60 keV of energy. The detector performance reported here meets the requirements needed to achieve the principal scientific goals of the ReD experiment in the search for a directional effect due to columnar recombination. A phenomenological parameterisation of the recombination probability in LAr is presented and employed for modeling the dependence of scintillation quenching and charge yield on the drift field for electron recoils between 50–500 keV and fields up to 1000 V/cm.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Muon radiography is a technique based on the measurement of absorption profiles of muons as they pass through matter. This measurement allows to obtain an image of the inner structure of large volume ...objects and is suitable to be applied in several fields, such as volcanology, archaeology and civil engeneering. One of the main applications concerns the study of volcanic structures; indeed it is possible to use this technique to measure the mass distribution inside the edifice of a volcano providing useful information to better understand the possible eruption mechanisms. The MURAVES (MUon RAdiography of VESuvius) project aims to the study of the summital cone of Mt. Vesuvius near Naples in Italy, one of the most dangerous active volcanoes in the world. The MURAVES apparatus is a modular, robust muon hodoscope system with a low power consumption, optimized to be used in inhospitable environments like the surroundings of volcanoes. The complete detection system is an array of identical tracking modules, each with an area of 1 m2, based on the use of plasic scintillators. The technologies, the status and the data analysis strategy of the experiment will be presented in this paper.
Muon Radiography or muography is based on the measurement of the absorption or scattering of cosmic muons, as they pass through the interior of large scale bodies, In particular, absorption muography ...has been applied to investigate the presence of hidden cavities inside the pyramids or underground, as well as the interior of volcanoes’ edifices. The MURAVES project has the challenging aim of investigating the density distribution inside the summit of Mt. Vesuvius. The information, together with that coming from gravimetric measurements, is useful as input to models, to predict how an eruption may develop. The MURAVES apparatus is a robust and low power consumption muon telescope consisting of an array of three identical and independent muon trackers, which provide in a modular way a total sensitive area of three square meters. Each tracker consists of four doublets of planes of plastic scintillator bars with orthogonal orientation, optically coupled to Silicon photomultipliers for the readout of the signal. The muon telescope has been installed on the slope of the volcano and has collected a first set of data, which are being analyzed.
Near UltraViolet High Density (NUV-HD) SiPMs produced by Fondazione Bruno Kessler in collaboration with INFN have been tested and characterized in INFN laboratories. The third generation of these ...devices (HD3) has proven to be suitable to equip the focal plane of the prototype Schwarzschild–Couder Medium Size Telescope (pSCT) proposed for the Cherenkov Telescope Array Observatory. Photosensors have been assembled in 4 16-pixel optical units coupled with TARGET–7 ASIC front-end electronics for amplification and digitization of the signal. At present, 9 modules have been successfully integrated on the pSCT camera and are currently taking data. In this contribution we report on the performances of the HD3 technology as single sensor and as assembled optical units, showing their performance and homogeneity in terms of gain and dark count rate.
We report about a study of the light response of a solid polystyrene-based scintillator with an arch shaped geometry, directly coupled to Silicon Photo Multiplier sensors for the light readout. This ...geometry is relevant for the design of a novel borehole detector for “muography” applications in Civil Engineering, Geology or Archaeology. The scintillator response has been investigated using a dedicated experimental set-up based on the detection of cosmic ray muons. Configurations that use reflecting and diffusive materials have been tested, as well as configurations with a cover specifically designed to enclose and protect the scintillator. The results found a good compromise between the light response and an easy solution for the detector assembly.
The Schwarzschild Couder Medium Size Telescope prototype (pSCT) is going to test the Schwarzschild Couder solution proposed for Medium Size telescopes for the Cherenkov Telescope Array. The camera ...consists of 177 photodetection modules grouped into sectors of maximum 25 modules each. The sensitive elements of the modules, located in the focal plane of the telescope, are matrices of 64 6 mm × 6 mm pixels of Silicon Photomultipliers (SiPMs). The front-end electronics is designed for signal sampling technique using the TARGET-7 ASIC. The prototype under construction and test at the Fred Lawrence Whipple Observatory site will be equipped with the inner central sector fully operational. Sensors from Fondazione Bruno Kessler will be used for 9 of the 25 modules. A complete characterization of these very recent, highly sensitive Near UV sensors, the assembly procedure and metrology results on several focal plane elements has been conducted. Performances of the 16-sensors matrices and measurements with the TARGET-7 ASIC front-end coupled to FBK sensors will be shown and deeply discussed.
•A camera for the prototype Schwarzschild Couder Telescope for CTA is being tested.•A 16-FBK SiPM matrix was studied and its homogeneity was verified.•The TARGET 7 readout module was coupled and optimized to the FBK SiPMs.
Abstract
The BLEMAB European project (BLast furnace stack density Estimation through on-line Muon ABsorption measurements), evolution of the previous Mu-Blast European project, is designed to ...investigate in detail the capability of muon radiography techniques applied to the imaging of a blast furnace’s inner zone. In particular, the geometry and size of the so called “cohesive zone”, i.e. the spatial zone where the slowly downward moving material begins to soften and melt, that plays an important role in the performance of the blast furnace itself. Thanks to the high penetration power of the natural cosmic ray muon radiation, muon transmission radiography represents an appropriate non-invasive methodology for imaging large high-density structures such as blast furnaces, whose linear size can be up to a few tens of meters. A state-of-the-art muon tracking system, whose design profits from the long experience of our collaboration in this field, is currently under development and will be installed in 2022 at a blast furnace on the ArcelorMittal site in Bremen (Germany) for many months. Collected data will be exploited to monitor temporal variations of the average density distribution inside the furnace. Muon radiography results will also be compared with measurements obtained through an enhanced multipoint probe and standard blast furnace models.
The muographic imaging of volcanoes relies on the measured transmittance of the atmospheric muon flux through the target. An important bias affecting the result comes from background contamination ...mimicking a higher transmittance. The MU‐RAY and TOMUVOL collaborations measured independently in 2013 the atmospheric muon flux transmitted through the Puy de Dôme volcano using their early prototype detectors, based on plastic scintillators and on Glass Resistive Plate Chambers, respectively. These detectors had three (MU‐RAY) or four (TOMUVOL) detection layers of 1 m2 each, tens (MU‐RAY) or hundreds (TOMUVOL) of nanosecond time resolution, a few millimeter position resolution, an energy threshold of few hundreds MeV, and no particle identification capabilities. The prototypes were deployed about 1.3 km away from the summit, where they measured, behind rock depths larger than 1000 m, remnant fluxes of 1.83±0.50(syst)±0.07(stat) m−2 d−1 deg−2 (MU‐RAY) and 1.95±0.16(syst)±0.05(stat) m−2 d−1 deg−2 (TOMUVOL), that roughly correspond to the expected flux of high‐energy atmospheric muons crossing 600 meters water equivalent (mwe) at 18° elevation. This implies that imaging depths larger than 500 mwe from 1 km away using such prototype detectors suffer from an overwhelming background. These measurements confirm that a new generation of detectors with higher momentum threshold, time‐of‐flight measurement, and/or particle identification is needed. The MU‐RAY and TOMUVOL collaborations expect shortly to operate improved detectors, suitable for a robust muographic imaging of kilometer‐scale volcanoes.
Key Point
The feasibility of muon imaging of km thick volcanoes was checked using two different detectors
PDF
