The goal of the ENUBET project is to demonstrate that a precision of ∼1% on measurement of the absolute neutrino cross section at GeV scale can be achieved by monitoring the positron production in ...the decay tunnel coming from the three-body semileptonic decays of kaons. The baseline option for the tunnel instrumentation employs a fine-grained shashlik calorimeter with a 4.3 X0 longitudinal segmentation to separate positrons and pions coming from other decay modes of kaons. The system is complemented by rings of plastic scintillator doublets below the calorimeter acting as a photon veto to suppress the π0 background and to provide timing informations. SiPMs instrumenting the detector will be exposed to sizeble amounts of neutrons arising in hadronic showers. In order to reproduce such a working environment, SiPMs with different cell size (from 12 to 20 μm) were irradiated at the INFN-LNL CN Van Der Graaf with neutron fluences up to 2×1011 n/cm2 (1 MeV-eq.). The exposed light sensors were characterized in terms of I–V curves at different irradiation levels, and their response tested by exposing a prototype on beam at CERN. In this contribution we will report the results of the described tests on SiPMs, together with the advances in their integration with the ENUBET detectors.
A prototype for the instrumented decay tunnel of ENUBET was tested in 2018 at the CERN East Area facility with charged particles up to 5 GeV . This detector is a longitudinal sampling calorimeter ...with lateral scintillation light readout. The calorimeter was equipped by an additional “
t
0
-layer” for timing and photon discrimination. The performance of this detector in terms of electron energy resolution, linearity, response to muons and hadron showers are presented in this paper and compared with simulation. The
t
0
-layer was studied both in standalone mode using pion charge exchange and in combined mode with the calorimeter to assess the light yield and the 1 mip/2 mip separation capability. We demonstrate that this system fulfills the requirements for neutrino physics applications and discuss performance and additional improvements.
Abstract
The main source of systematic uncertainty on neutrino cross section measurements at the GeV scale originates from the poor knowledge of the initial flux. The reduction of this uncertainty to ...1% can be achieved through the monitoring of charged leptons produced in association with neutrinos. The goal of the ENUBET ERC project is to prove the feasibility of such a monitored neutrino beam. In this contribution, the final results of the ERC project, together with the complete assessment of the feasibility of its concept, are presented. An overview of the detector technology for a next generation of high precision neutrino-nucleus cross section measurements, to be performed with the ENUBET neutrino beam, is also given.
Abstract
The Deep Underground Neutrino Experiment (DUNE) is a next
generation experiment aimed to study neutrino oscillation. Its
long-baseline configuration will exploit a Near Detector (ND) and a
...Far Detector (FD) located at a distance of ∼1300 km. The FD
will consist of four Liquid Argon Time Projection Chamber (LAr TPC)
modules. A Photon Detection System (PDS) will be used to detect the
scintillation light produced inside the detector after neutrino
interactions. The PDS will be based on light collectors coupled to
Silicon Photomultipliers (SiPMs). Different photosensor
technologies have been proposed and produced in order to identify
the best samples to fullfill the experiment requirements. In this
paper, we present the procedure and results of a validation campaign
for the Hole Wire Bonding (HWB) MPPCs samples produced by Hamamatsu
Photonics K.K. (HPK) for the DUNE experiment, referring to them as
`SiPMs'. The protocol for a characterization at cryogenic
temperature (77 K) is reported. We present the down-selection
criteria and the results obtained during the selection campaign
undertaken, along with a study of the main sources of noise of the
SiPMs including the investigation of a newly observed phenomenon in
this field.
Abstract
The ENUBET ERC project, also included in the CERN Neutrino Platform as NP06/ENUBET, is developing a new neutrino beam based on conventional techniques in which the flux and the flavor ...composition are known with unprecedented precision (
O
(1%)). Such a goal is accomplished monitoring the associated charged leptons produced in the decay region of the ENUBET facility. Positrons and muons from kaon decays are measured by a segmented calorimeter instrumenting the walls of the decay tunnel, while muon stations after the hadron dump can be used to monitor the neutrino component from pion decays. Furthermore, the narrow momentum width (<10%) of the beam provides a precise measurement (
O
(10%)) of the neutrino energy on an event by event basis, thanks to its correlation with the radial position of the interaction at the neutrino detector. ENUBET is therefore an ideal facility for a high precision neutrino cross-section measurement at the GeV scale, that could enhance the discovery potential of the next-generation of long baseline experiments. It is also a powerful tool for testing the sterile neutrino hypothesis and to investigate possible non-standard interactions.
The uncertainty in the initial neutrino flux is the main limitation for a precise determination of the absolute neutrino cross section. The ERC funded ENUBET project (2016–2021) is studying a ...facility based on a narrow band beam to produce an intense source of electron neutrinos with a ten-fold improvement in accuracy. Since March 2019 ENUBET is also a Neutrino Platform experiment at CERN: NP06/ENUBET. A key element of the project is the instrumentation of the decay tunnel to monitor large angle positrons produced together with νe in the three body decays of kaons (Ke3) and to discriminate them from neutral and charged pions. The need for an efficient and high purity e/π separation over a length of several meters, and the requirements for fast response and radiation hardness imposed by the harsh beam environment, suggested the implementation of a longitudinally segmented Fe/scintillator calorimeter with a readout based on WLS fibers and SiPM detectors. An extensive experimental program through several test beam campaigns at the CERN-PS T9 beam line has been pursued on calorimeter prototypes, both with a shashlik and a lateral readout configuration. The latter, in which fibers collect the light from the side of the scintillator tiles, allows to place the light sensors away from the core of the calorimeter, thus reducing possible irradiation damages with respect to the shashlik design. This contribution will present the achievements of the prototyping activities carried out, together with irradiation tests made on the Silicon Photo-Multipliers. The results achieved so far pin down the technology of choice for the construction of the 3 m long demonstrator that will take data in 2021.
The ENUBET experiment is developing a new narrow-band neutrino beam in which the flux and the flavor composition are known at 1
level, and the energy with O(10
) precision. Such a goal is ...accomplished monitoring the associated charged leptons produced in the decay region of the ENUBET facility:
and
from kaons are measured by a segmented calorimeter instrumenting the walls of the decay tunnel, while muon stations after the hadron dump can monitor muons from pions. We report an update on the status of the project.
The ENUBET project is aimed at designing and experimentally demonstrating the concept of monitored neutrino beams. These novel beams are enhanced by an instrumented decay tunnel, whose detectors ...reconstruct large-angle charged leptons produced in the tunnel and give a direct estimate of the neutrino flux at the source. These facilities are thus the ideal tool for high-precision neutrino cross-section measurements at the GeV scale because they offer superior control of beam systematics with respect to existing facilities. In this paper, we present the first end-to-end design of a monitored neutrino beam capable of monitoring lepton production at the single particle level. This goal is achieved by a new focusing system without magnetic horns, a 20 m normal-conducting transfer line for charge and momentum selection, and a 40 m tunnel instrumented with cost-effective particle detectors. Employing such a design, we show that percent precision in cross-section measurements can be achieved at the CERN SPS complex with existing neutrino detectors.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
PDF
