The development and placement of translucent zirconia ceramics on the dental materials market is in full swing. This research aimed to investigate how aging protocols affect the microstructure, color ...parameters and translucency of a new-generation monolithic zirconia ceramic.
Translucent zirconia ceramics KATANA-Zirconia STML with different surface treatments (as sintered - control, glazed, polished) was tested using two aging protocols (hydrothermal degradation in autoclave at 134 °C and 2 bars for three hours, chemical degradation in four-percent acetic acid at 80 °C for 16 hours) in order to examine phase composition using X-ray diffraction analysis and ΔE, ΔL and ΔC color parameters through spectrophotometry. The translucency parameter (TP) was calculated using parameters L*, a* and b* on a black and white surface.
Regardless of the surface treatment, aging protocols did not cause a tetragonal-to-monoclinic phase transformation, although hydrothermal degradation in the autoclave transformed the hybrid tetragonal-cubic structure of all specimens to a tetragonal one. All polished and glazed specimens during chemical degradation demonstrated a significant color change ΔE. Lightness ΔL significantly changed in polished specimens aged in the autoclave. In all specimens, ΔC underwent a change manifested through statistically insignificant yellowing. None of the aging protocols altered the translucency of specimens.
Aging, regardless of the final surface treatment, did not manifest a monoclinic phase in the specimens. A tetragonal-cubic microstructure dominates. Unlike polishing, glazing the surface of translucent zirconia ceramics contributed to minor changes in color, lightness and chromaticity. The translucency of translucent zirconia ceramics remains stable regardless of aging and surface treatment.
The aim was to adapt the Croatian and the Serbian versions of the Oral Health Impact Profile for the edentulous population (OHIP-EDENT-CRO and OHIP-EDENT-SRB).
The translation and cross-cultural ...adaptation were carried out in accordance with accepted international standards. A total of 95 and 177 removable denture wearers were recruited in Croatia and Serbia respectively. The reliability was evaluated by calculating Cronbach's alpha coefficient and by test-retest (30 participants in each country). The concurrent validity was determined by calculating the Spearman's rank coefficient between the OHIP-EDENT summary scores and one question related to removable denture satisfaction. Construct validity was determined by exploratory factor analysis (EFA). Responsiveness was determined by comparison of the OHIP-EDENT summary scores before and after dental implant placement to support mandibular overdentures (23 patients in Croatia, 21 in Serbia).
Cronbach's alpha coefficient was 0.92 in Croatia and 0.87 in Serbia. The intraclass correlation coefficient was 0.98 in Croatia and 0.94 in Serbia. In Croatia the Spearman's correlation coefficient was -0.71 (p<0.001) and in Serbia -0.74 (p<0.001). Both confirmed concurrent validity. Construct validity was tested by EFA, which extracted four factors in each country, accounting for 66.59% of the variance in Croatia and 59.33% in Serbia. Responsiveness was confirmed in both countries by a significant OHIP-EDENT summary score reduction and a high standardised effect size (3.9 in Croatia, 1.53 in Serbia).
The results prove that both instruments, the OHIP-EDENT-CRO and the OHIP-EDENT-SRB, have very good psychometric properties for assessing OHRQoL in the edentulous population.
Background/Aim
Published data about orofacial injuries and mouthguard use by professional handball players are scarce. The aim of this study was to investigate the prevalence of orofacial trauma and ...mouthguard use in professional handball players.
Materials and Methods
Data were collected from 100 professional handball players through a questionnaire, which contained 17 questions about age, experience in playing handball, playing position, orofacial trauma experience during the past 12 months, type of injury and mouthguard use.
Results
Almost half (49%) of the interviewed players experienced head and/or facial trauma during the past year. The most common injuries were soft tissue lacerations (39.6%). Dental injuries occurred in 22% of the participants, with socket bleeding being the most frequent injury (14%). Of the affected teeth, 76.9% were upper incisors. Mouthguards had a statistically significant protective role regarding tooth fractures and tooth avulsion (P=.043). Players who wore a mouthguard had a 5.55 times less chance of suffering dental injuries. Almost 76% of dental injuries resulted in complications afterward. Sixty‐seven percentage of the players knew that mouthguards could prevent injuries, but only 28% used them regularly. Of the players who wore a mouthguard regularly, 76.9% were advised to do so by their dentists.
Conclusions
The incidence of head and orofacial injuries among professional handball players is high. Mouthguards prevented severe dental injuries such as tooth fracture and avulsion, but their use was still limited.
To examine the effect of two aging protocols on the chemical and phase composition as well as the surface state of monolithic translucent zirconia ceramics.
Translucent zirconia ceramics ...KATANA-Zirconia STML with different surface treatments (no treatment, K1, K2; glazed, G1-G8; polished, P1-P8) underwent testing in order to examine how the two aging protocols (three-hour hydrothermal degradation in an autoclave at 134 °C and 2 bars: G1-G4, P1-P4, and sixteen-hour chemical degradation in four-percent acetic acid at 80 °C (ISO 6872): G5-G8, P5-P8) affect chemical composition, particularly the share of stabilizing yttrium oxide (Energy Dispersive X-Ray Fluorescence - EDXRF), phase composition (X-ray diffraction - XRD) and surface state in terms of roughness and gloss.
Aging protocols did not affect the tested chemical composition stability of specimens and a high share of stabilizing yttrium-oxide (≥10% of total content), which correlates with the absence of monoclinic phase. A decrease in gloss on all specimens is statistically significant. Chemical degradation substantially increased the surface roughness of tested specimens.
Translucent monolithic zirconia demonstrated a stable chemical composition and resistance to tetragonal-to-monoclinic transformation. Surface gloss was significantly reduced, especially in polished specimens. Contrary to glazed specimens, the tested polished specimens manifested an increase in surface roughness. Glazing the surface of translucent monolithic zirconia produces better esthetic, tribological and hygienic effects than polishing.
The aims of the study were to determine the impact of temporomandibular disorders (TMD) on self-percieved oral health related quality of life (OHRQoL) and to compare OHRQoL of patients with TMD with ...a control group. A total of 81 TMD patients participated in a study group and 400 adults served as the control group. The mean OHIP summary scores were computed for all patients with the same diagnosis and the same subgroup of axis I according to the RDC/TMD exam form. The mean OHIP subscores for all seven domains of the OHIP questionnaire were compared between the study and the control group. The hierarchical linear regression model was used to assess the most important variables according to the RDC/TMD protocol that contribute to OHRQoL in TMD patients with the OHIP summary score as dependent variable. According to this study, TMD had a high association with reduced OHRQoL (p < 0.001). More diagnoses of axis I according to the RDC/TMD protocol (p < 0.001), higher age of TMD patients (p < 0.001) and diagnoses associated with limited jaw movements contributed to more impaired OHRQoL (p = 0.008 and p = 0.030, respectively). Female TMD patients had no significantly different OHRQoL compared to male patients (p = 0.436). According to regression analysis, higher age (p < 0.001), more physical diagnoses (p = 0.018) and diagnosis Ib (p = 0.169) explained 39.1% of the variability (p < 0.001) of the OHIP summary score in TMD patients.
Abstract The articular-eminence inclination is an important element in the biomechanics of the temporomandibular joint and the entire masticatory system; however, very little is known about this ...inclination in archaeological human populations. Therefore, the aim of this study was to determine the values of, in addition to the differences between, the articular-eminence inclination in medieval and contemporary human populations. The study was carried out on two dry skull groups. The first group consisted of 14 dry skulls from the medieval culture group Bijelo Brdo (BB) of East Croatia, and the other consisted of 137 recent dry skulls from the osteologic collection of the Institute of Anatomy (IA) in Zagreb. All BB skulls were dentulous, whereas the IA skulls were divided into dentulous and edentulous groups. The articular-eminence inclination was measured in relation to the Frankfurt horizontal plane on digital images of the skull's two lateral views using AutoCAD computer software. The mean value of the articular-eminence inclination in the BB sample group (49.57°) was lower, with a statistical significance ( p < 0.01), than those of the IA dentulous (61.56°), the IA edentulous (62.54°), and all the combined IA (61.99°) specimens. Because the values of the articular-eminence inclination can vary a lot with reference to the number of specimens and the different methods used for measuring, the obtained values yield only orientational information. Further investigations including a larger number of medieval specimens are needed to confirm the results obtained from this study.
The aim of this study was to establish effect of 14 day consumption of commercially available yoghurt containing Lactobacillus rhamnosus ATCC53103 - LGG (Bioaktiv LGG, Dukat, Croatia) on ...Streptococcus mutans and Lactobacillus spp. salivary counts in children. Twenty five patients, 6-10 yr old participated in the study. At the inclusion in the study caries risk for every patient was evaluated. The saliva samples were tested with chair side kits for saliva buffer capacity (CRT buffer, Vivadent, Schaan, Liechtenstein), S. Mutans and Lactobacillus counts (CRT bacteria test, Vivadent, Schaan, Liechtenstein). Seven, 14 and 30d after yoghurt consumption saliva samples were tested again with CRT buffer and CRT bacteria tests. Obtained data were analyzed using chi2 and Kruskal-Wallis tests. Results showed significant increase in saliva buffer capacity 30d after yoghurt consumption. S. Mutans salivary counts were significantly decreased after 30d. Significant differences in Lactobacillus counts were not observed. It could be concluded that daily consumption of yoghurt containing LGG have an inhibitory effect on oral pathogenic bacteria and may be beneficial in caries prevention.
of the study was to analyse translucency parameter (TP values) of glass-ceramics fabricated by different techniques and investigate the effect of the corrosive medium on TP values.
Three specimens of ...each type of IPS e.max ceramics (Ivoclar Vivadent, Schaan, Liechtenstein) were made in three colours (A2, C2 and B3) by three fabrication techniques (layering - e.max Ceram Dentin; heat-pressing - e.max Press; CAD/CAM - e.max CAD). Specimens were made in the form of plates (10 mm x 12 mm x 0.8 mm). CIE L*a*b* values were measured by a spectrophotometer (X-Rite DTP 20 Pulse, Neu Isenburg, Germany) before and after exposure to 4% acetic acid at 80 °C for 16 hours (ISO 6872) to calculate translucency parameter (TP values). Statistical data were analysed using the IBM SPSS 22 software.
IPS e.max Ceram Dentin had significantly the lowest TP values, and IPS e.max Press the highest TP values of all colours (A2, C2, B3), both prior and after exposure to acid (p<0.001). The difference in TP values among colours was evident in the IPS e.max Ceram Dentin material, both before and after exposure to acid with a great effect size (p<0.001; η2 = 0.702 and 0.741), and in the IPS e.max Press material (p<0.001, effect size 0.547 and 0.576). CAD/CAD specimens showed uniform TP values between three colours. Further, exposure to a corrosive medium did not result in a statistically significant change of TP values in any of the materials tested.
Different types of glass-ceramics showed significant difference in TP values both with respect to the fabrication technique and colour. Exposure to a corrosive medium did not result in a statistically significant change of TP values.
PDF
