Youth footballers need to be developed to meet the technical, tactical, and physical demands of professional level competition, ensuring that the transition between competition levels is successful. ...To quantify the physical demands, peak match intensities have been measured across football competition tiers, with team formations and tactical approaches shown to influence these physical demands. To date, no research has directly compared the physical demands of elite youth and professional footballers from a single club utilising common formations and tactical approaches. The current study quantified the total match and peak match running demands of youth and professional footballers from a single Australian A-League club. GPS data were collected across a single season from both a professional (n = 19; total observations = 199; mean ± SD; 26.7 ± 4.0 years) and elite youth (n = 21; total observations = 59; 17.9 ± 1.3 years) team. Total match demands and peak match running demands (1-10 min) were quantified for measures of total distance, high-speed distance >19.8 km·h-1 and average acceleration. Linear mixed models and effect sizes identified differences between competition levels. No differences existed between competition levels for any total match physical performance metric. Peak total and high-speed distances demands were similar between competitions for all moving average durations. Interestingly, peak average acceleration demands were lower (SMD = 0.63-0.69) in the youth players across all moving average durations. The data suggest that the development of acceleration and repeat effort capacities is crucial in youth players for them to transition into professional competition.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Acquisition evaluations are expensive, have a high time liability, and tend to prioritize engineering requirements over human factors and good experimental design. Shooting serials usually consist of ...static prone shooting to minimize movement variability, increase reliability of accuracy and timing data or use a single data point to make acquisition decisions. To better understand the number of trials required to achieve representative performance of accuracy and timing, 60 shots from the standing unsupported position while cyclically moving the weapon from the low ready to shoot was utilized. Intra-class correlations, standard error of measurement, minimal detectable change, and sequential averaging analysis (SAA) were used to evaluate the variables of radial error, shot interval, x-bias and y-bias over the 60 shots. The number of trials required to achieve an intraclass correlation of greater than 0.8 ranged from 2 (shot interval) to 58 (y-bias), whereas SAA varied between 3 (x-bias) and 43 (shot interval) trials. When averaging 10 shots at a time, the moving intraclass correlation remained above 0.8 for radial error and y-bias between 7 and 15 shots, shot interval from the second shot, but x-bias never reached 0.8. The number of trials required to satisfy each reliability method was inconsistent, in line with previous literature. Given the limitations identified in the literature as well as practical considerations such as the preference for prioritizing radial error reasonable performance stability can be achieved after 15 shots, and using the moving intraclass correlation results it is recommended that the first six shots are discarded with the following nine shots used for analysis.
(1) Identify differences in hip and pelvic biomechanics in patients with femoroacetabular impingement syndrome (FAIS) compared with controls during everyday activities (eg, walking, squatting); and ...(2) evaluate the effects of interventions on hip and pelvic biomechanics during everyday activities.
Systematic review.
Medline, CINAHL, EMBASE, Scopus and SPORTDiscus until February 2017.
Primary aim: studies that investigated hip or pelvic kinematics and/or joint torques of everyday activities in patients with FAIS compared with the asymptomatic contralateral limb or a control group. Secondary aim: studies that evaluated effects of conservative or surgical interventions on patients with FAIS using pre-post or controlled clinical trial designs. Biomechanical data must have been collected using three-dimensional motion capture devices. Reporting quality was assessed using the Epidemiological Appraisal Instrument and data were pooled (standardised mean difference (SMD), 95% CI) where populations and primary outcomes were similar.
Fourteen studies were included (11 cross-sectional and three pre/post intervention), varying between low and moderate reporting quality. Patients with FAIS walked with a lower: peak hip extension angle (SMD -0.40, 95% CI -0.71 to -0.09), peak internal rotation angle (-0.67, 95% CI -1.19 to -0.16) and external rotation joint torque (-0.71, 95% CI -1.07 to -0.35), and squatted to a lesser depth with no difference in hip flexion range. Pre/post intervention data were limited in number and quality, and to surgical cohorts.
This review suggests that patients with FAIS may demonstrate hip biomechanical impairments during walking and squatting, with minimal literature available to comment on other tasks.
The information presented in the review provides insight into the biomechanical differences associated with FAIS; however, the between-group differences were small to moderate. This information may aid in the development of management strategies for people with the condition.
CRD42016038677.
Wearable microtechnology is effective in detecting fast deliveries in cricket, however methods to quantify delivery intensity have not been established. This study aimed to investigate the utility of ...wearable sensors in quantifying cricket fast bowling intensity.
Fifteen sub-elite male fast bowlers performed deliveries at warm-up, match, and maximal intensities. A principal component analysis resulted in the selection of perceived exertion and seven variables of bowling exertion derived from trunk- (PlayerLoad™, trunk flexion velocity, trunk forward rotation velocity) and tibia-mounted (tibial acceleration at back foot contact, front foot contact, back foot re-contact and front foot re-contact) inertial measurement units for further analysis. Repeated measures ANOVAs were used to investigate the effect of intensity on outcome variables. Significant main effects of intensity and large effect sizes were identified for all variables (p < .05, n
p
2
> 0.14). Measures from the match and maximal conditions were significantly larger compared with the warm-up condition (P
holm
< .05). No differences were observed between the match and maximal conditions (p > .05). Inertial measurement metrics can distinguish between a warm-up effort and both match and maximal fast bowling delivery intensity. These devices provide a unique, time-efficient approach to cricket fast bowling exertion quantification.
Defence acquisitions use accuracy measures as a discriminating factor in weapon purchases, but assessments are generally completed in static, supported postures at static targets with few differences ...being seen between configurations. The aim of this study was to investigate whether an assessment requiring repositioning between shots could reveal differences. Participants shot at a static target under four conditions: an unweighted rifle and the addition of a mass fixed at three different positions. Accuracy and timing as well as discomfort measures were captured and compared. Hit percentage, consistency and timing varied over time, and timing increased with the addition of mass in two out of the three conditions. There was an increase in discomfort with the addition of mass further from the participant. The results showed that relying on accuracy and consistency measures alone to make acquisition decisions could have the consequence of purchasing equipment not fit for the human.
Practitioner Summary: This research shows that relying on accuracy and consistency measures alone to make weapon-system acquisition decisions could have the consequence of purchasing equipment not fit for the user. Further research should focus on 'upstream' issues such as muscle fatigue and aim point stability in order to better understand human-weapon-system interactions.
Temporal changes in the total running demands of professional football competition have been well documented, with absolute running demands decreasing in the second half. However, it is unclear ...whether the peak match running demands demonstrate a similar decline. A total of 508 GPS files were collected from 44 players, across 68 matches of the Australian A-League. GPS files were split into the 1
and 2
half, with the peak running demands of each half quantified across 10 moving average durations (1-10 min) for three measures of running performance (total distance, high-speed distance > 19.8 km
h
and average acceleration). Players were categorised based on positional groups: attacking midfielder (AM), central defender (CD), defensive midfielder (DM), striker (STR), wide defender (WD) and winger (WNG). Linear mixed models and effect sizes were used to identify differences between positional groups and halves. Peak running demands were lower in the second half for STR across all three reported metrics (ES = 0.60-0.84), with peak average acceleration lower in the second half for DM, WD and WNG (ES = 0.60-0.70). Irrespective of match half, AM covered greater peak total distances than CD, STR, WD and WIN (ES = 0.60-2.08). Peak high-speed distances were greater across both halves for WIN than CD, DM and STR (ES = 0.78-1.61). Finally, STR had lower peak average acceleration than all positional groups across both halves (ES = 0.60-1.12). These results may help evaluate implemented strategies that attempt to mitigate reductions in second half running performance and inform position specific training practices.
Purpose
Understanding the test–retest reliability of physiological responses to load carriage influences the interpretation of those results. The aim of this study was to determine the test–retest ...reliability of physiological measures during loaded treadmill walking at 5.5 km h
−1
using the MetaMax 3B.
Methods
Fifteen Australian Army soldiers (9 male, 6 female) repeated two 12-min bouts of treadmill walking at 5.5 km h
−1
in both a 7.2 kg Control condition (MetaMax 3B, replica rifle) and a 23.2 kg Patrol condition (Control condition plus vest) across three sessions, separated by one week. Expired respiratory gases and heart rate were continuously collected, with the final 3 min of data analysed. Ratings of Perceived Exertion and Omnibus-Resistance Exercise Scale were taken following each trial. Reliability was quantified by coefficient of variation (CV), intra-class correlation coefficients (ICC), smallest worthwhile change (SWC), and standard error of the measurement.
Results
Metabolic and cardiovascular variables were highly reliable (≤ 5% CV; excellent-moderate ICC), while the respiratory variables demonstrated moderate reliability (< 8% CV; good-moderate ICC) across both conditions. Perceptual ratings had poorer reliability during the Control condition (12–45% CV; poor ICC) than the Patrol condition (7–16% CV; good ICC).
Conclusions
The test–retest reliability of metabolic and cardiovascular variables was high and relatively consistent during load carriage. Respiratory responses demonstrated moderate test–retest reliability; however, as the SWC differed with load carriage tasks, such data should be interpreted independently across loads. Perceptual measures demonstrated poor to moderate reliability during load carriage, and it is recommended that they only be employed as secondary measures.
Graphical abstract
Coaches use physically constraining tools to supplement their coaching when developing sport-specific skills, however, their effectiveness is unknown. This scoping review aimed to understand the ...efficacy of physically constraining tools used in racket, stick, and club sports for grip-specific skill development. This scoping review followed the Joanna Briggs Institute methodology and PRISMA guidelines. Peer-reviewed research, including quasi-experimental, true-experimental, case studies, and grey literature were considered. Peer-reviewed sources were searched on Web of Science, Medline, and SPORTDiscus until October 6th, 2022. Exclusion criteria were (1) not original peer-reviewed research; (2) disabled participants or used for rehabilitation; or (3) not available in English. Data extracted were the type of tool, research foci, measures, and outcomes of the tool's efficacy. Zero peer-reviewed sources were identified on the efficacy of using physically constraining tools for grip-specific skill development. Common trends identified from the excluded sources were explored to provide a basis for the importance of using physically constraining tools for grip-specific skill development. Many tools are used in coaching despite their unclear efficacy, however, the current results can guide future work to assess the acute and longitudinal effects of using these tools, specifically within the development and performance of sport-specific skills.
Peak match running intensities have recently been introduced to quantify the peak running demands of football competition, across incremental time intervals, to inform training practices. However, ...their between-match variation is yet to be comprehensively reported, limiting the ability to determine meaningful changes in peak match running intensities. The current study aimed to quantify the between-match variability in peak match running intensities across discrete moving average durations (1–10 min). GPS data were collected from 44 elite football players across 68 matches (mean ± SD; 13 ± 10 observations per player). For inclusion players must have completed 70mins of a match across a minimum of two matches. Performance metrics included total and high-speed (> 19.8 km·h-1) running distances and average acceleration (m·s -2), expressed relative to time. For each metric, the coefficient of variation and smallest worthwhile difference were calculated. The peak match running intensity data was similar to previously reported data from various football competitions. The between-match CV of relative total distance ranged between 6.8–7.3%, with the CV for average acceleration and relative high-speed running being 5.4–5.8% and 20.6–29.8%, respectively. The greater variability observed for relative high-speed running is likely reflective of the varying constraints and contextual factors that differ between matches. The reported between-match variability helps to provide context when interpreting match performance and prescribing training drills using peak match running intensity data.
The aim of this study was to determine whether there are differences in the accuracy and consistency of repeated lawn bowl deliveries between different bowling conditions and to describe the bias of ...bowls that missed the target (jack). Twenty-seven elite lawn bowl athletes were recruited to partake in the study. Participants delivered 16 bowls in four conditions: (i) forehand and (ii) backhand towards a target 23 metres away and (iii) forehand and (iv) backhand towards a target 27 metres away. The resting position of each bowl relative to the jack was described in terms of absolute displacement, width displacement and length displacement. For each participant and each condition, the average absolute displacement of deliveries was calculated as a measure of accuracy; the average width and length displacement was used to describe the bias of deliveries; and the bivariate variable error of absolute displacement was calculated as a measure of consistency. The forehand towards a target 23 metres away was significantly less accurate and consistent when compared with other conditions. There was a bias for greater width displacement of both forehand deliveries (p < 0.001). Analysing lawn bowls in this detail provides specific areas for coaching to improve lawn bowling performance.