Test of the HAPD light sensor for the Belle II Aerogel RICH Yusa, Y.; Adachi, I.; Dolenec, R. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2017, Letnik:
876
Journal Article
Recenzirano
The Aerogel Ring-Imaging Cherenkov detector (ARICH) is being installed in the endcap region of Belle II spectrometer to identify particles from B meson decays by detecting the Cherenkov ring image ...from aerogel radiators. To detect single photons, high-sensitive photon detector which has wide effective area (∼70mm × 70mm), a Hybrid Avalanche Photo Detector (HAPD), has been developed in a collaboration with Hamamatsu K.K. The HAPD consists of hybrid structure of a vacuum tube and an avalanche photodiode (APD). It can be operated in 1.5T magnetic field of the spectrometer and withstands the radiation levels expected in the Belle II experiment. There are two steps of electric pulse amplification: acceleration of photo-electron in electric field in the vacuum tube part and electron avalanche in the APD part resulting in total gain of order 105. For the ARICH, we use 420 HAPDs in total. Before installing them, we performed quality assessment studies such as measurements of dark current, noise level, signal-to-noise ratio and two-dimensional scan with laser illumination. We also measured quantum efficiency of the photocathode. During the HAPD performance tests in the magnetic field, we observed very large signal pulses which cause long dead time of the readout electronics in some of the HAPDs. We have carried out a number of studies to understand this phenomenon, and have found a way to mitigate it and suppress the degradation of the ARICH performance. In this report, we will show a summary of the HAPD performance and quality assessment measurements including validation in the magnetic field for all of the HAPDs manufactured for the ARICH in the Belle II.
The Belle II experiment is a new generation B factory experiment at the SuperKEKB electron–positron collider. The main purpose of the experiment is to search for new physics with a large sample of B ...meson decays. The proximity-focusing Aerogel Ring-Imaging Cherenkov detector (ARICH) has been designed to identify kaons and pions in the forward end-cap of the Belle II spectrometer. Using aerogel as radiator with specialized photon sensors called HAPD, the K/π separation is expected to reach more than 4 σ in the momentum range from 0.5 GeV/c to 4.0 GeV/c. ARICH detector was constructed in summer 2017 and was installed in the Belle II spectrometer in the beam line of the SuperKEKB collider. The test of the ARICH detector is performed using both cosmic rays and the beam collisions during the accelerator commissioning. We observe Cherenkov rings in the ARICH detector associated with charged tracks detected by the tracking system. The reconstructed Cherenkov angle distribution has a clear and reasonable peak. The ARICH K∕π separation performance is evaluated using Bhabha events in beam runs; the separation power achieve the design value.
Front-end electronics of the Belle II aerogel ring imaging detector Pestotnik, R.; Adachi, I.; Burmistrov, L. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
02/2020, Letnik:
952
Journal Article
Recenzirano
A proximity focusing RICH detector with an aerogel radiator is used for charged particle identification in the forward end-cap of the Belle II spectrometer. The detector, consisting of a 4 cm aerogel ...radiator, a 16 cm expansion volume and a photon detector with 420 Hybrid Avalanche Photo Detectors, is mounted in a very confined space between Central Drift Chamber and Electromagnetic Calorimeter, allowing only 5 cm of space for the readout electronics. In our solution, low power front-end read-out boards are mounted at the back side of each of the HAPD photosensors. These boards have each been tested individually before their installation onto the photosensors and into the spectrometer. Most important design issues and first experiences with the aforementioned front-end read-out boards are presented in this contribution.
We have developed a RICH counter as a new forward particle identification device for the Belle II experiment. As a Cherenkov radiator in this counter, a dual aerogel layer combination consisting of ...two refractive indicies, n=1.045 and 1.055, is employed. Mass production of these aerogel tiles has been done during 2013–2014 with new method improved by Chiba group. Optical qualities for them have been examined. The refractive indices of the obtained tiles were found to be in good agreement with our expectations, and the transparencies were high enough to be used for the RICH radiator.
Development of the ARICH monitor system for the Belle II experiment Hataya, K.; Adachi, I.; Dolenec, R. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2017, Letnik:
876
Journal Article
Recenzirano
The Belle II detector is under construction at KEK in Japan. In the forward endcap region of the Belle II detector, particle identification (PID) is performed by the Aerogel Ring Imaging Cherenkov ...(ARICH) counter composed of aerogel tiles and 144-channel Hybrid Avalanche Photo-Detectors (HAPDs). The photon detection efficiency of the photosensor is important for a stable operation of the ARICH. To examine the performance of the HAPDs periodically, a monitor system using scattered photons injected by optical fibers is being developed. In this paper, we report the test using the prototype monitor system and the tests with a partially built ARICH detector.
Development of slow control system for the Belle II ARICH counter Yonenaga, M.; Adachi, I.; Dolenec, R. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2017, Letnik:
876
Journal Article
Recenzirano
A slow control system (SCS) for the Aerogel Ring Imaging Cherenkov (ARICH) counter in the Belle II experiment was newly developed and coded in the development frameworks of the Belle II DAQ software. ...The ARICH is based on 420 Hybrid Avalanche Photo-Detectors (HAPDs). Each HAPD has 144 pixels to be readout and requires 6 power supply (PS) channels, therefore a total number of 2520 PS channels and 60,480 pixels have to be configured and controlled. Graphical User Interfaces (GUIs) with detector oriented view and device oriented view, were also implemented to ease the detector operation. The ARICH SCS is in operation for detector construction and cosmic rays tests. The paper describes the detailed features of the SCS and preliminary results of operation of a reduced set of hardware which confirm the scalability to the full detector.
We present measurements of partial branching fractions of inclusive semileptonic B → Xuℓ+ νℓ decays using the full Belle dataset of 711 fb−1 of integrated luminosity at the Υ(4S) resonance and for ℓ ...= e, μ. Inclusive semileptonic B → Xuℓ+ νℓ decays are Cabibbo-Kobayashi-Maskawa (CKM) suppressed and measurements are complicated by the large background from CKM favored B → Xcℓ+ νℓ transitions, which have a similar signature. Using machine learning techniques, we reduce this and other backgrounds effectively, while retaining access to a large fraction of the B → Xuℓ+νℓ phase space and high signal efficiency. We measure partial branching fractions in three phase-space regions covering about 31% to 86% of the accessible B → Xuℓ+νℓ phase space. The most inclusive measurement corresponds to the phase space with lepton energies of EBℓ > 1 GeV, and we obtain ΔB ( B → Xuℓ+νℓ) = (1.59 ± 0.07 ± 0.16) × 10−3 from a two-dimensional fit of the hadronic mass spectrum and the four-momentum-transfer squared distribution, with the uncertainties denoting the statistical and systematic error. We find |Vub| = (4.10 ± 0.09 ± 0.22 ± 0.15) × 10−3 from an average of four calculations for the partial decay rate with the third uncertainty denoting the average theory error. This value is higher but compatible with the determination from exclusive semileptonic decays within 1.3 standard deviations. In addition, we report charmless inclusive partial branching fractions separately for B + and B 0 mesons as well as for electron and muon final states. No isospin breaking or lepton flavor universality violating effects are observed.
We present the results of a search for the b → d ℓ + ℓ − flavor-changing neutral-current rare decays B + , 0 → ( η , ω , π + , 0 , ρ + , 0 ) e + e − and B + , 0 → ( η , ω , π 0 , ρ + ) μ + μ − using ...a 711 fb − 1 data sample that contains 772 × 10 6 B B ¯ events. The data were collected at the ϒ ( 4 S ) resonance with the Belle detector at the KEKB asymmetric-energy e + e − collider. We find no evidence for signal and set upper limits on branching fractions at the 90% confidence level in the range ( 3.8 – 47 ) × 10 − 8 depending on the decay channel. The obtained limits are the world’s best results. This is the first search for the channels B + , 0 → ( ω , ρ + , 0 ) e + e − and B + , 0 → ( ω , ρ + ) μ + μ − . Published by the American Physical Society 2024
We report the result of a search for the rare decay
B
0
→
γ
γ
using a combined dataset of
753
×
10
6
B
B
¯
pairs collected by the Belle experiment and
387
×
10
6
B
B
¯
pairs collected by the ...Belle II experiment from decays of the
ϒ
(
4
S
)
resonance produced in
e
+
e
−
collisions. A simultaneous fit to the Belle and Belle II data sets yields
11.0
−
5.5
+
6.5
signal events, corresponding to a
2.5
σ
significance. We determine the branching fraction
B
(
B
0
→
γ
γ
)
=
(
3.7
−
1.8
+
2.2
(
stat
)
±
0.5
(
syst
)
)
×
10
−
8
and set a 90% credibility level upper limit of
B
(
B
0
→
γ
γ
)
<
6.4
×
10
−
8
.
<supplementary-material>
<copyright-statement>Published by the American Physical Society</copyright-statement>
2024
</supplementary-material>
Abstract We present measurements of the branching fractions of eight $$ {\overline{B}}^0 $$ B ¯ 0 → D (*)+ K − $$ {K}_{(S)}^{\left(\ast \right)0} $$ K S ∗ 0 , B − → D (*)0 K − $$ ...{K}_{(S)}^{\left(\ast \right)0} $$ K S ∗ 0 decay channels. The results are based on data from SuperKEKB electron-positron collisions at the Υ(4 S ) resonance collected with the Belle II detector, corresponding to an integrated luminosity of 362 fb − 1 . The event yields are extracted from fits to the distributions of the difference between expected and observed B meson energy, and are efficiency-corrected as a function of m ( K − $$ {K}_{(S)}^{\left(\ast \right)0} $$ K S ∗ 0 ) and m ( D (*) $$ {K}_{(S)}^{\left(\ast \right)0} $$ K S ∗ 0 ) in order to avoid dependence on the decay model. These results include the first observation of $$ {\overline{B}}^0 $$ B ¯ 0 → D + K − $$ {K}_S^0 $$ K S 0 , B − → D* 0 K − $$ {K}_S^0 $$ K S 0 , and $$ {\overline{B}}^0 $$ B ¯ 0 → D* + K − $$ {K}_S^0 $$ K S 0 decays and a significant improvement in the precision of the other channels compared to previous measurements. The helicity-angle distributions and the invariant mass distributions of the K − $$ {K}_{(S)}^{\left(\ast \right)0} $$ K S ∗ 0 systems are compatible with quasi-two-body decays via a resonant transition with spin-parity J P = 1 − for the K − $$ {K}_S^0 $$ K S 0 systems and J P = 1 + for the K − K* 0 systems. We also present measurements of the branching fractions of four $$ {\overline{B}}^0 $$ B ¯ 0 → D (*)+ $$ {D}_s^{-} $$ D s − , B − → D (*)0 $$ {D}_s^{-} $$ D s − decay channels with a precision compatible to the current world averages.