•Food authentication by means of elemental composition is crucial for traceability.•XRF patterns and statistical analysis, establishes a basis for in-situ characterization.•A protocol is proposed for ...fast and reliable sample preparation and statistical analysis of XRF data.
Food product nutritional and sensory characteristics are often deeply linked to its territory of origin; therefore, its authentication by means of elemental composition becomes crucial for traceability and fighting food fraud. This study aims to establish a fast and reproducible procedure for origin and quality assessment of Sicilian tomato fruits, including PGI “Pomodoro di Pachino”, by using the X-ray fluorescence (XRF) technique. Measurements were performed on different parts of PGI Pachino tomatoes belonging to the same production lot. Principal Component and Cluster Analyses show that the samples cluster accordingly with the production lot, disentangling the different parts of the fruit. This procedure, which uses XRF yield elemental pattern and statistical analysis, establishes a solid basis for characterizing elemental profiles by a fast XRF in-situ campaign, supporting the traceability system. The reliability of XRF results was confirmed by comparing elemental concentrations with ICP-MS measurements, performed for comparison, and tomato literature values.
.
PANDORA, Plasmas for Astrophysics, Nuclear Decays Observation and Radiation for Archaeometry, is planned as a new facility based on a state-of-the-art plasma trap confining energetic plasma for ...performing interdisciplinary research in the fields of Nuclear Astrophysics, Astrophysics, Plasma Physics and Applications in Material Science and Archaeometry: the plasmas become the environment for measuring, for the first time, nuclear decay rates in stellar-like condition (such as
7
Be decay and beta-decay involved in s-process nucleosynthesis), especially as a function of the ionization state of the plasma ions. These studies will give important contributions for addressing several astrophysical issues in both stellar and primordial nucleosynthesis environment (
e.g.
, determination of solar neutrino flux and
7
Li Cosmological Problem), moreover the confined energetic plasma will be a unique light source for high-performance stellar spectroscopy measurements in the visible, UV and X-ray domains, offering advancements in observational astronomy. As to magnetic fields, the experimental validation of theoretical first- and second-order Landé factors will drive the layout of next-generation polarimetric units for the high-resolution spectrograph of the future giant telescopes. In PANDORA new plasma heating methods will be explored, that will push forward the ion beam output, in terms of extracted intensity and charge states. More, advanced and optimized injection methods of ions in an ECR plasma will be experimented, with the aim to optimize its capture efficiency. This will be applied to the ECR-based Charge Breeding technique, that will improve the performances of the SPES ISOL-facility at Laboratori Nazionali di Legnaro-INFN. Finally, PANDORA will be suitable for energy conversion, making the plasma a source of high-intensity electromagnetic radiation, for applications in material science and archaeometry.
Abstract
Neutron detectors perform key tasks in many research fields as nuclear, particle and astroparticle physics as well as neutron dosimetry, radiotherapy, and radiation protection. Neutron ...detectors exhibiting tracking capability are still missing, although several approaches to neutron momentum reconstruction have been proposed. In this context, we aim at developing a novel RecoIl-Proton Track Imaging DEtection system “
RIPTIDE
”, in which the light output of a fast scintillation signal is used to perform a complete reconstruction in space and time of the neutron-proton elastic scattering. The 3D track reconstruction is going to be implemented by state-of-the-art high-sensitivity imaging detector (CMOS, MCP-Timepix). Preliminary Geant4 simulations of the proposed set-up show up a good detection efficiency in a compact active volume. The envisaged electronic readout can be easily adapted according to a specific application (event-by-event mode or integration mode). The system can be rescaled by increasing the detection volume or by combining several detection modules. Further developments of the basic detection technique can be adapted for fast charged particle detection tracking as well.
Abstract
Neutron detectors are an essential tool for the development of many research fields, as nuclear, particle and astroparticle physics as well as radiotherapy and radiation safety. Since ...neutrons cannot directly ionize, their detection is only possible via nuclear reactions. Consequently, neutron-based experimental techniques are related to the detection of charged particle or electromagnetic radiation originating from neutron-induced reactions. The study of fast neutrons is often based on the neutron-proton elastic scattering reaction. In this case, the ionization induced by the recoil protons in a hydrogenous material constitutes the basic information for the design and development of neutron detectors. Although experimental techniques have continuously improved and refined, so far, proton-recoil track imaging is still weak in laboratory rate environments because of the extremely small detection efficiency. To address this deficiency, we propose a novel recoil-proton track imaging system in which the light deriving from a fast scintillation signal is used to perform a complete reconstruction in space and time of the event. In particular, we report the idea of RIPTIDE (RecoIl Proton Track Imaging DEtector): an innovative system which combines a plastic scintillator coupled to imaging devices, based on CMOS technology, or micro channel plate sensors. The proposed apparatus aims at providing neutron spectrometry capability by stereoscopically imaging the recoil-protons tracks, correlating the spatial information with the time information. RIPTIDE intrinsically enable the online analysis of the ionization track, thus retrieving the neutron direction and energy, without spoiling the overall efficiency of the detection system. Finally, the spatial and topological event reconstruction enables particle discrimination — a crucial requirement for neutron detection — by deducing the specific energy loss along the track.
Abstract Riptide is a detector concept aiming to track fast neutrons. It is based on neutron-proton elastic collisions inside a plastic scintillator, where the neutron momentum can be measured by ...imaging the scintillation light. More specifically, by stereoscopically imaging the recoil proton tracks, the proposed apparatus provides neutron spectrometry capability and enable the online analysis of the specific energy loss along the track. In principle, the spatial and topological event reconstruction enables particle discrimination, which is a crucial property for neutron detectors. In this contribution, we report the advances on the Riptide detector concept. In particular, we have developed a Geant4 optical simulation to demonstrate the possibility of reconstructing with sufficient precision the tracks and the vertices of neutron interactions inside a plastic scintillator. To realistically model the optics of the scintillation detector, mono-energetic protons were generated inside a 6 × 6 × 6 cm 3 cubic BC-408 scintillator, and the produced optical photons were propagated and then recorded on a scoring plane corresponding to the surfaces of the cube. The photons were then transported through an optical system to a 2 × 2 cm 2 photo sensitive area with 1 Megapixel. Moreover, we have developed two different analysis procedures to reconstruct 3D tracks: one based on data fitting and one on Principal Component Analysis. The main results of this study will be presented with a particular focus on the role of the optical system and the attainable spatial and energy resolution.
Abstract
Fast neutron detection is often based on the neutron-proton elastic scattering reaction: the ionization caused by recoil protons in a hydrogenous material constitutes the basic information ...for the design and development of a class of neutron detectors. Although experimental techniques have continuously improved, proton-recoil track imaging remains still at the frontier of n-detection systems, due to the high photon sensitivity required. Several state-of-the-art approaches for neutron tracking by using n-p single and double scattering — referred to as Recoil Proton Track Imaging (RPTI) — can be found in the literature. So far, they have showed limits in terms of detection efficiency, complexity, cost, and implementation. In order to address some of these deficiencies, we propose the design of RIPTIDE, a novel recoil-proton track imaging detector in which the light output produced by a fast scintillator is used to perform a complete reconstruction in space and time of the interaction events. The proposed idea is viable thanks to the dramatic advances in low noise and single photon counting achieved in the last decade by new scientific CMOS cameras as well as pixel sensors, like Timepix or MIMOSIS. In this contribution, we report the advances on the RIPTIDE concept: Geant4 Monte Carlo simulations, light collection tests as well as state-of-the-art approach to image readout, processing and fast analysis.
Abstract FOOT (FragmentatiOn Of Target) is an applied nuclear physics experiment with the aim of performing high precision cross section measurements for fragmentation reactions of interest in ...hadrontherapy and radiation protection in space. The physics program of the experiment foresees a set of measurements with light ion beams, such as C and O, in the energy range of 100–800 MeV/u interacting with tissue-like and shielding material targets. The setup was initially conceived for the detection of charged fragments and, in 2021, the Collaboration started the study of possible solutions for neutron detection. Two detection systems have been proposed: one based on BC-501A liquid scintillators with neutron/ γ discrimination capabilities and a system based on BGO crystals operated in phoswich mode. In 2022, a dedicated data acquisition campaign was carried out at the n_TOF facility at CERN to evaluate the capabilities of the two systems. First, the neutron/ γ discrimination efficiency of the BC-501A system was studied using radioactive sources. Then, the two systems were placed in the n_TOF experimental area to study their neutron detection efficiency under a well characterized neutron beam. In this work, the first preliminary results concerning the characterization of the two possible neutron detectors of FOOT are presented.
Double Sided Silicon Strip Detectors (DSSSD) are highly segmented detectors that are widely used in nuclear physics especially in radioactive beam experiments where, due to the low beam intensities, ...one needs to cover large solid angles with high granularity. A study of the response of DSSSDs, using 7Li and 16O beams at different energies is presented. In order to characterize the detector behavior for events corresponding to particles entering the detector in the interstrip gap both for ohmic and junction sides, signals of positive and negative polarities were acquired at the same time. Different procedures for the selection of full energy events and for the determination of the corresponding efficiencies are shown and discussed.
When a carbon beam interacts with human tissues, many secondary fragments are produced into the tumor region and the surrounding healthy tissues. Therefore, in hadrontherapy precise dose calculations ...require Monte Carlo tools equipped with complex nuclear reaction models. To get realistic predictions, however, simulation codes must be validated against experimental results; the wider the dataset is, the more the models are finely tuned. Since no fragmentation data for tissue-equivalent materials at Fermi energies are available in literature, we measured secondary fragments produced by the interaction of a 55.6 MeV u−1 12C beam with thick muscle and cortical bone targets. Three reaction models used by the Geant4 Monte Carlo code, the Binary Light Ions Cascade, the Quantum Molecular Dynamic and the Liege Intranuclear Cascade, have been benchmarked against the collected data. In this work we present the experimental results and we discuss the predictive power of the above mentioned models.
Magnetoplasmas in ECR-Ion Sources are excited from gaseous elements or vapours by microwaves in the range 2.45–28 GHz via Electron Cyclotron Resonance. A B-minimum, magnetohydrodynamic stable ...configuration is used for trapping the plasma. The values of plasma density, temperature and confinement times are typically ne=1011−1013 cm−3, 01eV<Te<10 keV, 0.001<tc<1 s. At INFN-LNS several diagnostics tools have been developed for probing the electromagnetic emission of such plasmas, in the optical/X-ray domain. Fast Silicon Drift detectors with high energy resolution of 125 eV at 5.9 keV have been used for the characterization of plasma emission at 02<E<3 keV . In the domain 0.4–17 keV an X-ray pin-hole camera technique has allowed space resolved X-ray spectroscopy with a spatial resolution down to 30 μm and an energy resolution down to 140 eV at 5.9 keV . In parallel, imaging in the optical range and spectroscopic measurements have been carried out. Relative abundances of H/H2 atoms/molecules in the plasmas have been measured for different values of neutral pressure, microwave power and magnetic field profile (they are critical for high-power proton sources).
PDF
