Evolution of the bioplastics industry has changed directions dramatically since the early 1990s. The latest generation is moving toward durable bioplastics having high biobased content. The main ...objective is to replace “fossil carbon” with “renewable carbon”, a holistic strategy to mitigate climate change by minimizing the environmental impact of a product throughout its life cycle. Durable bioplastics is desired for multiuse long-term application in automotive, electronics and other industries. One necessary requirement for them is to be both tough and strong, yet the two attributes are often mutually exclusive. Does this mean a biobased and biodegradable polymer as polylactic acid (PLA) with its high strength but low toughness cannot be adopted for durable applications? Well, not exactly; this is where the concept of tailoring the properties of PLA to achieve stiffness–toughness balance along with acceptable heat resistance comes into play. In this perspective, we summarize the recent research progress in addressing the toughness vs strength and heat resistance conflict inherent in PLA. Blends having super toughness and composites based on the toughened PLA blends formulated to obtain desired material properties are covered. Morphology and crystallinity that individually contribute to toughness and heat resistance have also been elucidated.
This work has explored the potential use of lignocellulosic agricultural residues like soy stalk, corn stalk, wheat straw, and perennial grasses, like switchgrass and miscanthus, as reinforcement for ...engineering value-added biobased composite materials. The effect of incorporating 30 wt % lignocellulosic fibers into a biodegradable polymer matrix comprising a pre-blend of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(butylene adipate-co-terephthalate) (PBAT) has been investigated. Results of this work explain that fiber chemical composition and fiber length distribution provide a complementary effect on the mechanical and thermal properties of the resulting biobased composites. Comparing the effects of all the fiber types, miscanthus (MS)-based composites, showed slightly higher tensile strength, and Young’s modulus improved by 104%. The highest heat deflection temperature of 110 °C was obtained with PHBV/PBAT/MS composites. This study has revealed prospects for hybridization of these lignocellulosic fibers to fabricate hybrid composites with enhanced performance.
This study is an experimental investigation of using biocarbon as renewable carbonaceous filler for engineering-plastic-based blends. Poly(trimethylene terephthalate) (PTT) and poly(lactic acid) ...(PLA) combined with a terpolymer were selected as the blend matrix. Biocarbon with various particle size ranges was segregated and used as filler. Depending on the particle size and aspect ratio of the biocarbon used, the microstructure of the composite was found to change. Composites having a biocarbon particle size range of 20–75 μm resulted in a morphology showing better dispersion of the blend components when compared with composites containing other biocarbon particle size ranges. Furthermore, the addition of epoxy-based multifunctional chain extender was found to result in much finer morphologies having dispersed polymer particles of very small size. Impact strength increased significantly in composites that possessed such morphologies favoring high energy dissipation mechanisms. A maximum notched Izod impact strength of 85 J/m was achieved in certain composite formulations, which is impressive considering the inherent brittleness of PTT and PLA. From rheological observations, incorporation of biocarbon increased viscosity, but the shear-thinning behavior of the matrix was preserved. By increasing the injection mold temperature, fast crystallization of PTT was achieved, which increased the heat deflection temperature of composites to 80 °C. This study shows that composites with overall improvement in mechanical and thermal performance can be produced by selecting biocarbon with appropriate particle sizes and suitable processing aids and conditions, which all together control the morphology and crystallinity.
Primary afferents are known to be inhibited by kappa opioid receptor (KOR) signaling. However, the specific types of somatosensory neurons that express KOR remain unclear. Here, using a newly ...developed KOR-cre knockin allele, viral tracing, single-cell RT-PCR, and ex vivo recordings, we show that KOR is expressed in several populations of primary afferents: a subset of peptidergic sensory neurons, as well as low-threshold mechanoreceptors that form lanceolate or circumferential endings around hair follicles. We find that KOR acts centrally to inhibit excitatory neurotransmission from KOR-cre afferents in laminae I and III, and this effect is likely due to KOR-mediated inhibition of Ca2+ influx, which we observed in sensory neurons from both mouse and human. In the periphery, KOR signaling inhibits neurogenic inflammation and nociceptor sensitization by inflammatory mediators. Finally, peripherally restricted KOR agonists selectively reduce pain and itch behaviors, as well as mechanical hypersensitivity associated with a surgical incision. These experiments provide a rationale for the use of peripherally restricted KOR agonists for therapeutic treatment.
•KOR is expressed in peptidergic primary afferents in mouse and human•KOR is expressed in LTMRs that form circumferential and lanceolate endings•KOR signaling inhibits nociceptor sensitization and neurogenic inflammation•Peripherally selective KOR agonists inhibit nociception
Snyder et al. identify primary afferents that express the kappa opioid receptor in mouse and human and show that kappa opioid receptor signaling inhibits these cells in physiological and behavioral experiments.
Persistent glucocorticoid elevation consistent with chronic stress exposure can lead to psychopathology, including mood and anxiety disorders. Women and stress-exposed adolescents are more likely to ...be diagnosed with mood disorders, suggesting that sex and age are important factors in determining vulnerability, though much remains to be determined regarding the mechanisms underlying this risk. Thus, the aim of the present experiments was to use the chronic corticosterone (CORT) exposure paradigm, a model of depression-like behavior that has previously been established primarily in adult males, to determine the mood-related effects of CORT in female and adolescent rats. Depression- and anxiety-like effects in adulthood were determined using the sucrose preference (SPT), the forced swim test (FST), the elevated plus maze, and fear conditioning. Basolateral amygdala (BLA) and medial prefrontal cortex (mPFC) glutamate receptor subunit levels were then measured. In a subsequent experiment, adult male and female rats were tested for the effects of pharmacological activation (via AMPA) or inhibition (via NBQX) of AMPA receptors in the BLA on behavior in the FST. Overall, females showed reduced anxiety- and depressive-like behaviors relative to males. However, females treated with CORT in adolescence, but not adulthood, had increased immobility in the FST, indicative of depression-like behavior. In contrast, CORT did not alter behavior in adolescent-treated males, though the previously reported depression-like effect of adult CORT exposure was observed. Control females had higher expression of the AMPA receptor subunits GluA1 and GluA2/3 selectively in the BLA relative to males. Adolescent CORT treatment, however, decreased BLA GluA1 and GluA2/3 expression in females, but increased expression in males, consistent with the direction of depression-like behavioral effects. Male and female rats also demonstrated opposing patterns of response to BLA AMPA receptor modulation in the FST, with AMPA infusion magnifying the sex difference of decreased immobility in females. Overall, these experiments show that increased glutamate receptor function in the BLA may decrease the risk of developing depressive-like behavior, further supporting efforts to target glutamatergic receptors for the treatment of stress-related psychiatric disorders. These findings also support further focus on sex as a biological variable in neuropsychiatric research.
Working memory develops over the course of adolescence, and neuroimaging studies find development-associated changes in the activity of prefrontal cortical brain regions. Establishment of a rodent ...model of working memory development would permit more comprehensive studies of the molecular and circuit basis for working memory development in health and disease. Thus, in this study, working memory performance was compared between adolescent and adult male Sprague-Dawley rats using an operant-based, delay-match-to-sample working memory task. Adolescent and adult rats showed similar rates of learning the task and similar performance at a low cognitive load (delays ≤ 6 s). However, when the cognitive load increased, adolescents exhibited impaired working memory performance relative to adults, until postnatal day 50 when performance was not significantly different. Despite evidence that cannabinoids disrupt working memory, we found no effect of acute treatment with the cannabinoid receptor agonist, WIN55212,2, at either age. Moreover, expression of glutamate and GABA receptor subunits was examined in the prelimbic and infralimbic prefrontal cortex across development. NMDA receptor subunit GluN2B expression significantly decreased with age in parallel with improvements in working memory. Thus, we show evidence that rats can be used as a model to study the molecular underpinnings of working memory development.
Abstract
We consider the problem of finding paths of shortest transit time between two points (popularly known as brachistochrone) for cylinders with off-centered center of mass, rolling down without ...slip, subject solely to the force of gravity. This problem is set up using principles of classical rigid body dynamics and the desired path function is solved for numerically using the method of discrete calculus of variations. We discover a distinct array of brachistochrone trajectories for off-centered cylinders, demonstrate a critical dependence of such paths on the initial location and orientation of cylinders’ centers of mass and bring new insights into the family of brachistochrone problems and solutions.
Multiphase blends of poly(lactic acid) (PLA), ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) terpolymer, and a series of renewable poly(ether-b-amide) elastomeric copolymer (PEBA) were ...fabricated through reactive melt blending in an effort to improve the toughness of the PLA. Supertoughened PLA blend showing impact strength of ∼500 J/m with partial break impact behavior was achieved at an optimized blending ratio of 70 wt % PLA, 20 wt % EMA-GMA, and 10 wt % PEBA. Miscibility and thermal behavior of the binary blends PLA/PEBA and PLA/EMA-GMA, and the multiphase blends were also investigated through differential scanning calorimetric (DSC) and dynamic mechanical analysis (DMA). Phase morphology and fracture surface morphology of the blends were studied through scanning electron microscopy (SEM) and atomic force microscopy (AFM) to understand the strong corelation between the morphology and its significant effect on imparting tremendous improvement in toughness. A unique “multiple stacked structure” with partial encapsulation of EMA-GMA and PEBA minor phases was observed for the PLA/EMA-GMA/PEBA (70/20/10) revealing the importance of particular blend composition in enhancing the toughness. Toughening mechanism behind the supertoughened PLA blends have been established by studying the impact fractured surface morphology at different zones of fracture. Synergistic effect of good interfacial adhesion and interfacial cavitations followed by massive shear yielding of the matrix was believed to contribute to the enormous toughening effect observed in these multiphase blends.
Poly(lactic acid) (PLA), one of the widely studied renewable resource based biopolymers, has yet to gain a strong commercial standpoint because of certain property limitations. This work is a ...successful attempt in achieving PLA biocomposites that showed concurrent improvements in impact strength and heat deflection temperature (HDT). Biocomposites were fabricated from a super toughened ternary blend of PLA, poly(ether-b-amide) elastomeric copolymer and ethylene-methyl acrylate-glycidyl methacrylate and miscanthus fibers. The effects of varying the processing parameters and addition of various nucleating agents were investigated. Crystallinity was controlled by optimizing the mold temperature and cycle time of the injection process. With the addition of 1 wt % aromatic sulfonate derivative (Lak-301) as a nucleating agent at a mold temperature of 110 °C, PLA biocomposites exhibited dramatic reduction in crystallization half time to 1.3 min with crystallinity content of 42%. Mechanical and thermal properties assessment for these biocomposites revealed a 4-fold increase in impact strength compared to neat PLA. The HDT of PLA biocomposites increased to 85 °C from 55 °C compared to neat PLA. Crystallization behavior was studied in detail using differential scanning calorimetry and was supported with observations from wide-angle X-ray diffraction profiles and polarized optical microscopy. The presence of a nucleating agent did not alter the crystal structure of PLA; however, a significant difference in spherulite size, crystallization rate and content was observed. Fracture surface morphology and distribution of nucleating agent in the PLA biocomposites were investigated through scanning electron microscopy.
PDF
