The link between wood and corresponding cellulose nanofiber (CNF) behavior is complex owing the multiple chemical pretreatments required for successful preparation. In this study we apply a few ...pretreatments on aspen wood and compare the final CNF behavior in order to rationalize quantitative studies of CNFs derived from aspen wood with variable properties. This is relevant for efforts to improve the properties of woody biomass through tree breeding. Three different types of pretreatments were applied prior to disintegration (microfluidizer) after a mild pulping step; derivatizing TEMPO-oxidation, carboxymethylation and non-derivatizing soaking in deep-eutectic solvents. TEMPO-oxidation was also performed directly on the plain wood powder without pulping. Obtained CNFs (44–55% yield) had hemicellulose content between 8 and 26 wt% and were characterized primarily by fine (height ≈ 2 nm) and coarser (2 nm < height < 100 nm) grade CNFs from the derivatizing and non-derivatizing treatments, respectively. Nanopapers from non-derivatized CNFs had higher thermal stability (280 °C) compared to carboxymethylated (260 °C) and TEMPO-oxidized (220 °C). Stiffness of nanopapers made from non-derivatized treatments was higher whilst having less tensile strength and elongation-at-break than those made from derivatized CNFs. The direct TEMPO-oxidized CNFs and nanopapers were furthermore morphologically and mechanically indistinguishable from those that also underwent a pulping step. The results show that utilizing both derivatizing and non-derivatizing pretreatments can facilitate studies of the relationship between wood properties and final CNF behavior. This can be valuable when studying engineered trees for the purpose of decreasing resource consumption when isolation cellulose nanomaterials.
Graphic abstract
SUMMARY
Biosynthesis of plant cell walls requires UDP‐glucose as the substrate for cellulose biosynthesis, and as an intermediate for the synthesis of other matrix polysaccharides. The sucrose ...cleaving enzyme sucrose synthase (SUS) is thought to have a central role in UDP‐glucose biosynthesis, and a long‐held and much debated hypothesis postulates that SUS is required to supply UDP‐glucose to cellulose biosynthesis. To investigate the role of SUS in cellulose biosynthesis of Arabidopsis thaliana we characterized mutants in which four or all six Arabidopsis SUS genes were disrupted. These sus mutants showed no growth phenotypes, vascular tissue cell wall defects, or changes in cellulose content. Moreover, the UDP‐glucose content of rosette leaves of the sextuple sus mutants was increased by approximately 20% compared with wild type. It can thus be concluded that cellulose biosynthesis is able to employ alternative UDP‐glucose biosynthesis pathway(s), and thereby the model of SUS requirements for cellulose biosynthesis in Arabidopsis can be refuted.
Significance Statement
Many models of cellulose biosynthesis in plants imply that sucrose synthase channels the substrate UDP‐glucose to the plasma membrane localized cellulose synthase complex. Here we used sextuple Arabidopsis mutants devoid of sucrose synthase activity to test this hypothesis directly. The results show that sucrose synthase is not required for cellulose biosynthesis in Arabidopsis.
Abstract
Plants constitute 80% of the biomass on earth, and almost two-thirds of this biomass is found in wood. Wood formation is a carbon (C)-demanding process and relies on C transport from ...photosynthetic tissues. Thus, understanding the transport process is of major interest for understanding terrestrial biomass formation. Here, we review the molecules and mechanisms used to transport and allocate C in trees. Sucrose is the major form in which C is transported in plants, and it is found in the phloem sap of all tree species investigated so far. However, in several tree species, sucrose is accompanied by other molecules, notably polyols and the raffinose family of oligosaccharides. We describe the molecules that constitute each of these transport groups, and their distribution across different tree species. Furthermore, we detail the metabolic reactions for their synthesis, the mechanisms by which trees load and unload these compounds in and out of the vascular system, and how they are radially transported in the trunk and finally catabolized during wood formation. We also address a particular C recirculation process between phloem and xylem that occurs in trees during the annual cycle of growth and dormancy. A search of possible evolutionary drivers behind the diversity of C-carrying molecules in trees reveals no consistent differences in C transport mechanisms between angiosperm and gymnosperm trees. Furthermore, the distribution of C forms across species suggests that climate-related environmental factors will not explain the diversity of C transport forms. However, the consideration of C-transport mechanisms in relation to tree–rhizosphere coevolution deserves further attention. To conclude the review, we identify possible future lines of research in this field.
Trees represent the largest terrestrial carbon sink and a renewable source of ligno-cellulose. There is significant scope for yield and quality improvement in these largely undomesticated species, ...and efforts to engineer elite varieties will benefit from improved understanding of the transcriptional network underlying cambial growth and wood formation. We generated highspatial- resolution RNA sequencing data spanning the secondary phloem, vascular cambium, and wood-forming tissues of Populus tremula. The transcriptome comprised 28,294 expressed, annotated genes, 78 novel protein-coding genes, and 567 putative long intergenic noncoding RNAs. Most paralogs originating from the Salicaceae whole-genome duplication had diverged expression, with the exception of those highly expressed during secondary cell wall deposition. Coexpression network analyses revealed that regulation of the transcriptome underlying cambial growth and wood formation comprises numerous modules forming a continuum of active processes across the tissues. A comparative analysis revealed that a majority of these modules are conserved in Picea abies. The high spatial resolution of our data enabled identification of novel roles for characterized genes involved in xylan and cellulose biosynthesis, regulators of xylem vessel and fiber differentiation and lignification. An associated web resource (AspWood, http://aspwood.popgenie.org) provides interactive tools for exploring the expression profiles and coexpression network.
SUMMARY
Cellulose is the main structural component in the plant cell walls. We show that two glycosyltransferase family 31 (GT31) enzymes of Arabidopsis thaliana, here named cellulose synthesis ...associated glycosyltransferases 1 and 2 (CAGE1 and 2), influence both primary and secondary cell wall cellulose biosynthesis. cage1cage2 mutants show primary cell wall defects manifesting as impaired growth and cell expansion in seedlings and etiolated hypocotyls, along with secondary cell wall defects, apparent as collapsed xylem vessels and reduced xylem wall thickness in the inflorescence stem. Single and double cage mutants also show increased sensitivity to the cellulose biosynthesis inhibitor isoxaben. The cage1cage2 phenotypes were associated with an approximately 30% reduction in cellulose content, an approximately 50% reduction in secondary cell wall CELLULOSE SYNTHASE (CESA) protein levels in stems and reduced cellulose biosynthesis rate in seedlings. CESA transcript levels were not significantly altered in cage1cage2 mutants, suggesting that the reduction in CESA levels was caused by a post‐transcriptional mechanism. Both CAGE1 and 2 localize to the Golgi apparatus and are predicted to synthesize β‐1,3‐galactans on arabinogalactan proteins. In line with this, the cage1cage2 mutants exhibit reduced levels of β‐Yariv binding to arabinogalactan protein linked β‐1,3‐galactan. This leads us to hypothesize that defects in arabinogalactan biosynthesis underlie the cellulose deficiency of the mutants.
Significance Statement
Cellulose, the main component of plant cell walls, is synthesized at the plasma membrane by a multiprotein complex with cellulose synthase enzymes at its core. Here, we show that two Golgi localized glycosyltransferase enzymes are indirectly involved in cellulose biosynthesis, likely by acting on the synthesis of glycans on arabinogalactan proteins.
Wood biosynthesis defines the chemical and structural properties of wood. The metabolic pathways that produce the precursors of wood cell wall polymers have a central role in defining wood ...properties. To make rational design of wood properties feasible, we need not only to understand the cell wall biosynthetic machinery, but also how sucrose transport and metabolism in developing wood connect to cell wall biosynthesis and how they respond to genetic and environmental cues. Here, we review the current understanding of the sucrose transport and primary metabolism pathways leading to the precursors of cell wall biosynthesis in woody plant tissues. We present both old, persistent questions and new emerging themes with a focus on wood formation in trees and draw upon evidence from the xylem tissues of herbaceous plants when it is relevant.
Currently one-third of the proteins encoded by the Arabidopsis (
) genome are of unknown function. Some of these unknown proteins are likely to be involved in uncharacterized vital biological ...processes. Evolutionarily conserved single copy genes in flowering plants have been shown to be enriched in essential housekeeping functions. This together with publicly available gene expression data allows for a focused search for uncharacterized essential genes. Here we identify an essential single copy gene called
(
) in Arabidopsis. We show that
is predominantly expressed in actively dividing cells and performs essential functions in seed development and root meristem maintenance. Cell cycle tracking using 5-ethynyl-2'-deoxyuridine staining and fluorescent cell cycle markers together with the increased size of nucleolus and nucleus in
mutants indicate that
is required for cell cycle progression through the S or G2 phases. Intriguingly, OPNR localizes to the nuclear envelope and mitochondria. Furthermore, the nuclear envelope localization of OPNR is dependent on its interaction with nuclear inner membrane Sad1/UNC-84 (SUN) domain proteins SUN1 and SUN2. Taken together our results open a line of investigation into an evolutionarily conserved essential cellular process occurring in both the nuclear envelopes and mitochondria of dividing cells.
Hydrogels of cellulose nanofibrils (CNFs) are promising wound dressing candidates due to their biocompatibility, high water absorption, and transparency. Herein, two different commercially available ...wood species, softwood and hardwood, were subjected to TEMPO-mediated oxidation to proceed with delignification and oxidation in a one-pot process, and thereafter, nanofibrils were isolated using a high-pressure microfluidizer. Furthermore, transparent nanofibril hydrogel networks were prepared by vacuum filtration. Nanofibril properties and network performance correlated with oxidation were investigated and compared with commercially available TEMPO-oxidized pulp nanofibrils and their networks. Softwood nanofibril hydrogel networks exhibited the best mechanical properties, and in vitro toxicological risk assessment showed no detrimental effect for any of the studied hydrogels on human fibroblast or keratinocyte cells. This study demonstrates a straightforward processing route for direct oxidation of different wood species to obtain nanofibril hydrogels for potential use as wound dressings, with softwood having the most potential.
A previously unknown maltose transporter is essential for the conversion of starch to sucrose in Arabidopsis leaves at night. The transporter was identified by isolating two allelic mutants with high ...starch levels and very high maltose, an intermediate of starch breakdown. The mutations affect a gene of previously unknown function, MEX1. We show that MEX1 is a maltose transporter that is unrelated to other sugar transporters. The severe mex1 phenotype demonstrates that MEX1 is the predominant route of carbohydrate export from chloroplasts at night. Homologous genes in plants including rice and potato indicate that maltose export is of widespread significance.
Cellulose nanofibrils (CNFs) are top-down nanomaterials obtainable from abundant lignocelluloses. Despite recent advances in processing technologies, the effects of variations in the lignocellulose ...structure and composition on CNF isolation and properties are poorly understood. In this study, we compared the isolation of CNFs from tension wood (TW) and normal wood (NW) from
Populus tremula
(aspen). The TW has a higher cellulose content, native cellulose fibrils with a larger crystalline diameter, and less lignin than the NW, making it an interesting material for CNF isolation. The wood powders were oxidized directly by 2,2,6,6-tetramethylpiperidin-1-oxyl, and the morphology and mechanical behaviors of the nanofibril suspensions and networks were characterized. The TW was more difficult to fibrillate by both chemical and mechanical means. Larger nanofibrils (5–10 nm) composed of 1.2 nm structures were present in the TW CNFs, whereas the NW samples contained more of thin (1.6 nm) structures, which also comprised 77% of the solid yield compared to the 33% for TW. This difference was reflected in the TW CNF networks as decreased transmittance (15% vs. 50%), higher degree of crystallinity (85.9% vs. 78.0%), doubled toughness (11 MJ/m
3
) and higher elongation at break (12%) compared to NW. The difference was ascribed to greater preservation of the hierarchical, more crystalline microfibril structure, combined with a more cellulose-rich network (84% vs. 70%). This knowledge of the processing, structure, and properties of CNFs can facilitate the breeding and design of wood feedstocks to meet the increasing demand for nanoscale renewable materials.
Graphic abstract