Liquid water can slip on a hydrophilic surface Ho, Tuan Anh; Papavassiliou, Dimitrios V; Lee, Lloyd L ...
Proceedings of the National Academy of Sciences,
09/2011, Letnik:
108, Številka:
39
Journal Article
Recenzirano
Odprti dostop
Understanding and predicting the behavior of water, especially in contact with various surfaces, is a scientific challenge. Molecular-level understanding of hydrophobic effects and their macroscopic ...consequences, in particular, is critical to many applications. Macroscopically, a surface is classified as hydrophilic or hydrophobic depending on the contact angle formed by a water droplet. Because hydrophobic surfaces tend to cause water slip whereas hydrophilic ones do not, the former surfaces can yield self-cleaning garments and ice-repellent materials whereas the latter cannot. The results presented herein suggest that this dichotomy might be purely coincidental. Our simulation results demonstrate that hydrophilic surfaces can show features typically associated with hydrophobicity, namely liquid water slip. Further analysis provides details on the molecular mechanism responsible for this surprising result.
The effects of surface-active nanoparticles and surfactants on the behavior of oil–water interfaces have implications for a variety of industrial processes related to multiphase flows including ...separation processes, enhanced oil recovery, and environmental remediation. In this work, the migration of an oil droplet in shear flow is investigated with the presence of surface-active molecules and nanoparticles at the oil–water interface. Pure oil (heptadecane) in water and oil with the presence of Janus nanoparticles (JPs) and/or octaethylene glycol monododecyl ether, a nonionic surfactant, were examined using coarse-grained computations. The shear flow field was created utilizing a Couette flow, where the top wall of a channel moved with a specified velocity and the bottom wall was kept stationary. The dissipative particle dynamics (DPD) method was applied. The oil drop was placed on the stationary wall, and its displacement was recorded over time. When surfactants were added at the oil–water interface, the slip of the water over the oil drop was reduced, leading to a larger displacement of the drop. Moreover, surfactant molecules tended to concentrate toward the rear side of the oil drop rather than the front as the drop moved in the flow field. The presence of only JPs on the oil–water interface resulted in slower droplet migration. In the presence of both JPs and surfactants, the effect of JPs on the oil–surfactant–water system was investigated by changing the number of JPs on the drop surface while keeping the concentration of the surfactant constant. Under the same shear rate, the droplet’s migration speed increased in the presence of both surfactants and JPs compared to the case of bare oil. The JPs appeared to follow a repeated pattern of motion while residing close to the solid substrate–oil drop contact line. These findings elucidate the contribution of both surfactants and JPs on oil drop displacement for enhanced oil recovery or remediation of an oil-contaminated subsurface.
The fate and aggregation of nanoparticles (NPs) in the subsurface are important due to potentially harmful impacts on the environment and human health. This study aims to investigate the effects of ...flow velocity, particle size, and particle concentration on the aggregation rate of NPs in a diffusion-limited regime and build an equation to predict the aggregation rate when NPs move in the pore space between randomly packed spheres (including mono-disperse, bi-disperse, and tri-disperse spheres). The flow of 0.2 M potassium chloride (KCl) through the random sphere packings was simulated by the lattice Boltzmann method (LBM). The movement and aggregation of cerium oxide (CeO
) particles were then examined by using a Lagrangian particle tracking method based on a force balance approach. This method relied on Newton's second law of motion and took the interaction forces among particles into account. The aggregation rate of NPs was found to depend linearly on time, and the slope of the line was a power function of the particle concentration, the Reynolds (Re) and Schmidt (Sc) numbers. The exponent for the Sc number was triple that of the Re number, which was evidence that the random movement of NPs has a much stronger effect on the rate of diffusion-controlled aggregation than the convection.
The purpose of this study was to assess and describe the current spectrum of emerging zoonoses between 2000 and 2006 in European countries. A computerized search of the Medline database from January ...1966 to August 2006 for all zoonotic agents in European countries was performed using specific criteria for emergence. Fifteen pathogens were identified as emerging in Europe from 2000 to August 2006: Rickettsiae spp., Anaplasma phagocytophilum, Borrelia burgdorferi, Bartonella spp., Francisella tularensis, Crimean Congo Haemorrhagic Fever Virus, Hantavirus, Toscana virus, Tick-borne encephalitis virus group, West Nile virus, Sindbis virus, Highly Pathogenic Avian influenza, variant Creutzfeldt–Jakob disease, Trichinella spp., and Echinococus multilocularis. Main risk factors included climatic variations, certain human activities as well as movements of animals, people or goods. Multi-disciplinary preventive strategies addressing these pathogens are of public health importance. Uniform harmonized case definitions should be introduced throughout Europe as true prevalence and incidence estimates are otherwise impossible.
The configuration of proteins is critical for their biochemical behavior. Mechanical stresses that act on them can affect their behavior leading to the development of decease. The von Willebrand ...factor (vWF) protein circulating with the blood loses its efficacy when it undergoes non-physiological hemodynamic stresses. While often overlooked, extensional stresses can affect the structure of vWF at much lower stress levels than shear stresses. The statistical distribution of extensional stress as it applies on models of the vWF molecule within turbulent flow was examined here. The stress on the molecules of the protein was calculated with computations that utilized a Lagrangian approach for the determination of the molecule trajectories in the flow filed. The history of the stresses on the proteins was also calculated. Two different flow fields were considered as models of typical flows in cardiovascular mechanical devises, one was a Poiseuille flow and the other was a Poiseuille-Couette flow field. The data showed that the distribution of stresses is important for the design of blood flow devices because the average stress can be below the critical value for protein damage, but tails of the distribution can be outside the critical stress regime.
The stress distribution along the trajectories of passive particles released in turbulent flow were computed with the use of Lagrangian methods and direct numerical simulations. The flow fields ...selected were transitional Poiseuille-Couette flow situations found in ventricular assist devices and turbulent flows at conditions found in blood pumps. The passive particle properties were selected to represent molecules of the von Willebrand factor (vWF) protein. Damage to the vWF molecule can cause disease, most often related to hemostasis. The hydrodynamic shear stresses along the trajectories of the particles were calculated and the changes in the distribution of stresses were determined for proteins released in different locations in the flow field and as a function of exposure time. The stress distributions indicated that even when the average applied stress was within a safe operating regime, the proteins spent part of their trajectories in flow areas of damaging stress. Further examination showed that the history of the distribution of stresses applied on the vWF molecules, rather than the average, should be used to evaluate hydrodynamically-induced damage.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Photothermal therapy using near‐infrared radiation and local heating agents can induce selective tumor ablation with limited harm to the surrounding normal tissue. Graphene sheets are promising local ...heating agents because of their strong absorbance of near‐infrared radiation. Experimental studies have been conducted to study the heating effect of graphene in photothermal therapy, yet few efforts have been devoted to the quantitative understanding of energy conversion and transport in such systems. Herein, a computational study of cancer photothermal therapy using near‐infrared radiation and graphene is presented using a Monte Carlo approach. A three‐dimensional model was built with a cancer cell inside a cube of healthy tissue. Functionalized graphene nanosheets were randomly distributed on the surface of the cancer cell. The effects of the concentration and morphology of the graphene nanosheets on the thermal behavior of the system were quantitatively investigated. The interfacial thermal resistance around the graphene sheets, which affects the transfer of heat in the nanoscale, was also varied to probe its effect on the temperature increase of the cancer cell and the healthy tissue. The results of this study could guide researchers to optimize photothermal therapy with graphene, while the modeling approach has the potential to be applied for investigating alternative treatment plans.
Photothermal therapy using near‐infrared radiation (NIR) and graphene is presented. Under NIR illumination, the graphene nanosheets can strongly absorb laser energy and convert it to heat, thus inducing the death of the cancer cell.
Dissipative particle dynamics (DPD) simulations were utilized to investigate the ability of sodium dodecyl sulfate (SDS) to adsorb inside a single-walled, arm-chair carbon nanotube (SWCNT), as well ...as the effect of surfactant on the properties of water inside the SWCNT. The diameter of the SWCNT varied from 1 to 5 nm. The radial and axial density profiles of water inside the SWCNTs were computed and compared with published molecular dynamics results. The average residence time and diffusivity were also calculated to show the size effect on mobility of water inside the SWCNT. It was found that nanotubes with diameter smaller than 3 nm do not allow SDS molecules to enter the SWCNT space. For larger SWCNT diameter, SDS adsorbed inside and outside the nanotube. When SDS was adsorbed in the hollow part of the SWCNT, the behavior of water inside the nanotube was found to be significantly changed. Both radial and axial density profiles of water inside the SWCNT fluctuated strongly and were different from those in bulk phase. In addition, SDS molecules increased the retention of water beads inside SWCNT (d ≥ 3nm) while water diffusivity was decreased.
Coarse-grained modeling methods allow simulations at larger scales than molecular dynamics, making it feasible to simulate multifluid systems. It is, however, critical to use model parameters that ...represent the fluid properties with fidelity under both equilibrium and dynamic conditions. In this work, dissipative particle dynamics (DPD) methods were used to simulate the flow of oil and water in a narrow slit under Poiseuille and Couette flow conditions. Large surfactant molecules were also included in the computations. A systematic methodology is presented to determine the DPD parameters necessary for ensuring that the boundary conditions were obeyed, that the oil and water viscosities were represented correctly, and that the velocity profile for the multifluid system agreed with the theoretical expectations. Surfactant molecules were introduced at the oil-water interface (sodium dodecylsulfate and octaethylene glycol monododecyl ether) to determine the effects of surface-active molecules on the two-phase flow. A critical shear rate was found for Poiseuille flow, beyond which the surfactants desorbed to form the interface forming micelles and destabilize the interface, and the surfactant-covered interface remained stable under Couette flow even at high shear rates.
Microparticles are produced by various cells due to a number of different stimuli in the circulatory system. Shear stress has been shown to injure red blood cells resulting in hemolysis or ...non-reversible sub-hemolytic damage. We hypothesized that, in the sub-hemolytic shear range, there exist sufficient mechanical stimuli for red blood cells to respond with production of microparticles. Red blood cells isolated from blood of healthy volunteers were exposed to high shear stress in a microfluidic channel to mimic mechanical trauma similar to that occurring in ventricular assist devices. Utilizing flow cytometry techniques, both an increase of shear rate and exposure time showed higher concentrations of red blood cell microparticles. Controlled shear rate exposure shows that red blood cell microparticle concentration may be indicative of sub-hemolytic damage to red blood cells. In addition, properties of these red blood cell microparticles produced by shear suggest that mechanical trauma may underlie some complications for cardiovascular patients.
PDF
