To create tissue replacements with qualities similar to human tissues, and for ease of tissue loss repair, novel 3D printing fabrication methods have recently been introduced and popularized in the ...field of tissue engineering and regenerative medicine as an alternative to the scaffold fabrication methods. 3D printing may provide the fabricate process to better mimic the internal microstructure and external appearance. Printable bioink should be developed for stable 3D structure stratification. Advanced bioinks for 3D printing are rationally designed materials intended to improve the functionality of printed tissue scaffolds. The search for an appropriate bioink capable of providing a suitable microenvironment to support cellular activities is ongoing. The extracellular matrix (ECM) provides instructive cues for cell attachment, proliferation, differentiation, and ultimately tissue regeneration. The use of ECM-based biomaterials in regenerative medicine is therefore, rapidly expanding. In this respect, the decellularized ECM biomaterials have gained popularity as an excellent source of bioink, given its capability to inherit the intrinsic cues from a native ECM. In this chapter, we describe the current status of ECM-based biomaterials, the emerging trends in ECM bioink development, and bioink requirements that could enable proper selection of the bioink to fabricate an engineered tissue/organ. In particular, rheological properties of bioprinting materials are significant for printing resolution and shape fidelity. We propose a general method of measuring non-Newtonian rheological properties based on rotational rheometers in oscillatory mode. In addition, the mathematical modeling incorporating the power law model is discussed. These approaches can be easily used to optimize printing parameters and verify the bioink printability because a variety of dECM-based bioinks possess shear-thinning properties.
We present a simple and effective method to obtain refined control of the molecular structure of silk biomaterials through physical temperature-controlled water vapor annealing (TCWVA). The silk ...materials can be prepared with control of crystallinity, from a low content using conditions at 4 °C (α helix dominated silk I structure), to highest content of ∼60% crystallinity at 100 °C (β-sheet dominated silk II structure). This new physical approach covers the range of structures previously reported to govern crystallization during the fabrication of silk materials, yet offers a simpler, green chemistry, approach with tight control of reproducibility. The transition kinetics, thermal, mechanical, and biodegradation properties of the silk films prepared at different temperatures were investigated and compared by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), uniaxial tensile studies, and enzymatic degradation studies. The results revealed that this new physical processing method accurately controls structure, in turn providing control of mechanical properties, thermal stability, enzyme degradation rate, and human mesenchymal stem cell interactions. The mechanistic basis for the control is through the temperature-controlled regulation of water vapor to control crystallization. Control of silk structure via TCWVA represents a significant improvement in the fabrication of silk-based biomaterials, where control of structure−property relationships is key to regulating material properties. This new approach to control crystallization also provides an entirely new green approach, avoiding common methods that use organic solvents (methanol, ethanol) or organic acids. The method described here for silk proteins would also be universal for many other structural proteins (and likely other biopolymers), where water controls chain interactions related to material properties.
Abstract Silk proteins are a promising material for drug delivery due to their aqueous processability, biocompatibility, and biodegradability. A simple aqueous preparation method for silk fibroin ...particles with controllable size, secondary structure and zeta potential is reported. The particles were produced by salting out a silk fibroin solution with potassium phosphate. The effect of ionic strength and pH of potassium phosphate solution on the yield and morphology of the particles was determined. Secondary structure and zeta potential of the silk particles could be controlled by pH. Particles produced by salting out with 1.25 m potassium phosphate pH 6 showed a dominating silk II (crystalline) structure whereas particles produced at pH 9 were mainly composed of silk I (less crystalline). The results show that silk I-rich particles possess chemical and physical stability and secondary structure which remained unchanged during post treatments even upon exposure to 100% ethanol or methanol. A model is presented to explain the process of particle formation based on intra- and intermolecular interactions of the silk domains, influenced by pH and kosmotropic salts. The reported silk fibroin particles can be loaded with small molecule model drugs, such as alcian blue, rhodamine B, and crystal violet, by simple absorption based on electrostatic interactions. In vitro release of these compounds from the silk particles depends on charge–charge interactions between the compounds and the silk. With crystal violet we demonstrated that the release kinetics are dependent on the secondary structure of the particles.
In this work, novel injectable and reduction-responsive hydrogels were successfully prepared via inverse electron demand Diels-Alder reaction between alginate-norbornene and a water-soluble PEG based ...disulfide cross-linker. The reduction-responsive cross-linker was designed to contain a PEG chain within two disulfide linkages, and two terminal tetrazine groups. The resulting hydrogels possessed high swelling ratios, porous morphology, excellent drug loading efficiency (~92%), and suitable mechanical properties. The drug release experiments demonstrated that the hydrogels released more than 90% of the encapsulated doxorubicin (DOX) in the presence of 10 mM glutathione while a minimal DOX release (<25%) was measured in physiological buffer (PBS, pH = 7.4) after 11 d. The cross-linker and hydrogels did not exhibit any apparent cytotoxicity to fibroblast cells. In contrast, DOX-loaded hydrogels induced anti-tumor activity against cancer cells. The injectable and reduction-responsive hydrogels hold great potential as a biomaterial for stimuli responsive drug delivery applications.
Display omitted
Display omitted
•pH-/thermo-responsive hydrogels were prepared using PAA, CsNb, and bisTz-PNIPAM.•Porous structure formed by Tz-Nb reaction greatly increased the drug loading content.•Hydrogels ...released a much higher amount of drug at pH 7.4 than at pH 2.2.•The drug release from hydrogels was enhanced at 37 °C via “shrinkage” of PNIPAM.
A dual pH-/thermo-responsive hydrogel was designed based on a polyelectrolyte complex of polyacrylic acid (PAA) and norbornene-functionalized chitosan (CsNb), which was synergized with chemical crosslinking using bistetrazine-poly(N-isopropyl acrylamide) (bisTz-PNIPAM). The thermo-responsive polymeric crosslinker, bisTz-PNIPAM, was synthesized via reversible addition–fragmentation transfer polymerization of NIPAM. FTIR, XRD, rheological and morphological analyses demonstrated the successful formation of the polyelectrolyte network. The highly porous structure generated through the in-situ “click” reaction between Tz and Nb resulted in a higher drug loading (29.35 %). The hydrogel (COOH/NH2 mole ratio of 3:1) exhibited limited drug release (8.5 %) of 5-ASA at a pH of 2.2, but it provided an almost complete release (92 %) at pH 7.4 and 37 °C within 48 h due to the pH responsiveness of PAA, hydrogel porosity, and shrinkage behavior of PNIPAM. The hydrogels were biodegradable and non-toxic against human fibroblast cells, suggesting their considerable potential for a colon-targeted drug delivery system.
Abstract The interactions of C2C12 myoblasts and human bone marrow stem cells (hMSCs) with silk-tropoelastin biomaterials, and the capacity of each to promote attachment, proliferation, and either ...myogenic- or osteogenic-differentiation were investigated. Temperature-controlled water vapor annealing was used to control beta-sheet crystal formation to generate insoluble silk-tropoelastin biomaterial matrices at defined ratios of the two proteins. These ratios controlled surface roughness and micro/nano-scale topological patterns, and elastic modulus, stiffness, yield stress, and tensile strength. A combination of low surface roughness and high stiffness in the silk-tropoelastin materials promoted proliferation and myogenic-differentiation of C2C12 cells. In contrast, high surface roughness with micro/nano-scale surface patterns was favored by hMSCs. Increasing the content of human tropoelastin in the silk-tropoelastin materials enhanced the proliferation and osteogenic-differentiation of hMSCs. We conclude that the silk-tropoelastin composition facilitates fine tuning of the growth and differentiation of these cells.
One of the most promising strategies for the controlled release of therapeutic molecules is stimuli-responsive and biodegradable hydrogels developed from natural polymers. However, current strategies ...to development stimuli-responsive hydrogels lack precise control over drug release profile and use cytotoxic materials during preparation. To address these issues, multi-stimuli responsive hydrogels derived from hyaluronic acid and diselenide based cross-linker were developed for the controlled release of doxorubicin (DOX). Hydrogels were rapidly formed via an inverse electron demand Diels–Alder click chemistry and encapsulated DOX/indocyanine green (ICG) in their porous networks. The hydrogels showed a rapid release of DOX in acidic (pH 5), reducing (10 mmol DTT), and oxidizing medium (0.5% H2O2), and after NIR irradiation. The in vitro experiments demonstrated that hydrogels were highly cytocompatible and the DOX-loaded hydrogels induced similar anti-tumor effect as compared to that of the free-DOX. Furthermore, DOX + ICG loaded hydrogels increased the antitumor efficacy of DOX after NIR irradiation.
Display omitted
The use of biomimetic scaffolds for bone tissue engineering has been studied for a long time. Biomimetic scaffolds can assist and accelerate bone regeneration that is similar to that of authentic ...tissue, which represents the environment of cells in a living organism. Currently, numerous biomaterials have been reported for use as a biomimetic scaffold. This review focuses on the design of biomimetic scaffolds, kinds of biomaterials and methods used to fabricate biomimetic scaffolds, growth factors used with biomimetic scaffold for bone regeneration, mobilization of biological agents into biomimetic scaffolds, and studies on (pre)clinical bone regeneration from biomimetic scaffolds. Then, future prospects for biomimetic scaffolds are discussed.
A novel physically and chemically double-crosslinked hydrogel derived from chitosan oligosaccharide/alginate (COS/Alg) was developed by using norbornene (Nb)-tetrazine (Tz) click reaction for ...ketoprofen delivery. The properties of the hydrogel were evaluated by rheological, FTIR, TGA, XRD, SEM, swelling and drug release studies. The Nb-Tz chemical cross-linking facilitated outstanding hydrophobic drug loading (44% wt/wt of ketoprofen) and sustained release through a hydrophobic interaction mechanism between the drug and the used polysaccharides. The COS/Alg electrostatics network (10/10 of NH2/COOH molar ratio) generated the pH responsiveness, suppressing the release in simulated gastric fluid (below 10% for 2 h) and enhancing the release in simulated intestinal fluids (up to 84% for 24 h). The prepared hydrogel was non-toxic to human HEK-293 cells (95% cell viability). This work opens up a potential approach for preparing hydrophilic hydrogels from natural polysaccharides that can be used in the delivery of hydrophobic drugs.
Display omitted
Adipose tissue-derived stem cells (ASCs) are considered as an attractive stem cell source for tissue engineering and regenerative medicine. We compared human bone marrow-derived mesenchymal stem ...cells (hMSCs) and hASCs under dynamic hydraulic compression to evaluate and compare osteogenic abilities. A novel micro cell chip integrated with microvalves and microscale cell culture chambers separated from an air-pressure chamber was developed using microfabrication technology. The microscale chip enables the culture of two types of stem cells concurrently, where each is loaded into cell culture chambers and dynamic compressive stimulation is applied to the cells uniformly. Dynamic hydraulic compression (1 Hz, 1 psi) increased the production of osteogenic matrix components (bone sialoprotein, oateopontin, type I collagen) and integrin (CD11b and CD31) expression from both stem cell sources. Alkaline phosphatase and Alrizarin red staining were evident in the stimulated hMSCs, while the stimulated hASCs did not show significant increases in staining under the same stimulation conditions. Upon application of mechanical stimulus to the two types of stem cells, integrin (β1) and osteogenic gene markers were upregulated from both cell types. In conclusion, stimulated hMSCs and hASCs showed increased osteogenic gene expression compared to non-stimulated groups. The hMSCs were more sensitive to mechanical stimulation and more effective towards osteogenic differentiation than the hASCs under these modes of mechanical stimulation.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK