The TOTEM collaboration at the CERN LHC has measured the differential cross-section of elastic proton–proton scattering at
s
=
8
TeV
in the squared four-momentum transfer range
0.2
GeV
2
<
|
t
|
<
...1.9
GeV
2
. This interval includes the structure with a diffractive minimum (“dip”) and a secondary maximum (“bump”) that has also been observed at all other LHC energies, where measurements were made. A detailed characterisation of this structure for
s
=
8
TeV
yields the positions,
|
t
|
dip
=
(
0.521
±
0.007
)
GeV
2
and
|
t
|
bump
=
(
0.695
±
0.026
)
GeV
2
, as well as the cross-section values,
d
σ
/
d
t
dip
=
(
15.1
±
2.5
)
μ
b
/
GeV
2
and
d
σ
/
d
t
bump
=
(
29.7
±
1.8
)
μ
b
/
GeV
2
, for the dip and the bump, respectively.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Abstract
The TOTEM collaboration at the CERN LHC has measured the differential cross-section of elastic proton–proton scattering at
$$\sqrt{s} = 8\,\mathrm{TeV}$$
s
=
8
TeV
in the squared ...four-momentum transfer range
$$0.2\,\mathrm{GeV^{2}}< |t| < 1.9\,\mathrm{GeV^{2}}$$
0.2
GeV
2
<
|
t
|
<
1.9
GeV
2
. This interval includes the structure with a diffractive minimum (“dip”) and a secondary maximum (“bump”) that has also been observed at all other LHC energies, where measurements were made. A detailed characterisation of this structure for
$$\sqrt{s} = 8\,\mathrm{TeV}$$
s
=
8
TeV
yields the positions,
$$|t|_{\mathrm{dip}} = (0.521 \pm 0.007)\,\mathrm{GeV^2}$$
|
t
|
dip
=
(
0.521
±
0.007
)
GeV
2
and
$$|t|_{\mathrm{bump}} = (0.695 \pm 0.026)\,\mathrm{GeV^2}$$
|
t
|
bump
=
(
0.695
±
0.026
)
GeV
2
, as well as the cross-section values,
$$\left. {\mathrm{d}\sigma /\mathrm{d}t}\right| _{\mathrm{dip}} = (15.1 \pm 2.5)\,\mathrm{{\mu b/GeV^2}}$$
d
σ
/
d
t
dip
=
(
15.1
±
2.5
)
μ
b
/
GeV
2
and
$$\left. {\mathrm{d}\sigma /\mathrm{d}t}\right| _{\mathrm{bump}} = (29.7 \pm 1.8)\,\mathrm{{\mu b/GeV^2}}$$
d
σ
/
d
t
bump
=
(
29.7
±
1.8
)
μ
b
/
GeV
2
, for the dip and the bump, respectively.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
The proton–proton elastic differential cross section
d
σ
/
d
t
has been measured by the TOTEM experiment at
s
=
2.76
TeV
energy with
β
∗
=
11
m
beam optics. The Roman Pots were inserted to 13 times ...the transverse beam size from the beam, which allowed to measure the differential cross-section of elastic scattering in a range of the squared four-momentum transfer (|
t
|) from 0.36 to
0.74
GeV
2
. The differential cross-section can be described with an exponential in the |
t
|-range between 0.36 and
0.54
GeV
2
, followed by a diffractive minimum (dip) at
|
t
dip
|
=
(
0.61
±
0.03
)
GeV
2
and a subsequent maximum (bump). The ratio of the
d
σ
/
d
t
at the bump and at the dip is
1.7
±
0.2
. When compared to the proton–antiproton measurement of the D0 experiment at
s
=
1.96
TeV
, a significant difference can be observed. Under the condition that the effects due to the energy difference between TOTEM and D0 can be neglected, the result provides evidence for the exchange of a colourless C-odd three-gluon compound state in the
t
-channel of the proton–proton and proton–antiproton elastic scattering.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
This paper describes the design and the performance of the timing detector developed by the TOTEM Collaboration for the Roman Pots (RPs) to measure the Time-Of-Flight (TOF) of the protons produced in ...central diffractive interactions at the LHC . The measurement of the TOF of the protons allows the determination of the longitudinal position of the proton interaction vertex and its association with one of the vertices reconstructed by the CMS detectors. The TOF detector is based on single crystal Chemical Vapor Deposition (scCVD) diamond plates and is designed to measure the protons TOF with about 50 ps time precision. This upgrade to the TOTEM apparatus will be used in the LHC run 2 and will tag the central diffractive events up to an interaction pileup of about 1. A dedicated fast and low noise electronics for the signal amplification has been developed. The digitization of the diamond signal is performed by sampling the waveform. In conclusion, after introducing the physics studies that will most profit from the addition of these new detectors, we discuss in detail the optimization and the performance of the first TOF detector installed in the LHC in November 2015.
This paper is concerned with a fixed-point implementation of the extended Kalman filter (EKF) for applications in sensorless control of ac motor drives. The sensitivity of the EKF to round-off errors ...is well known, and numerically advantageous implementations based on the square-root decomposition of covariance matrices have been developed to address this issue. However, these techniques have not been applied in the EKF-based sensorless control of ac drives yet. Specific properties of the fixed-point implementation of the EKF for a permanent-magnet synchronous motor (PMSM) drive are presented in this paper, and suitability of various square-root algorithms for this case is discussed. Three square-root algorithms-Bierman-Thorton, Carlson-Schmidt-Givens, and Carlson-Schmidt-Householder-were implemented, and their performances are compared to that of the standard implementation based on full covariance matrices. Results of both simulation studies and experimental tests performed on a developed sensorless PMSM drive prototype of rated power of 10.7 kW are presented. It was confirmed that the square-root algorithms improve the behavior of the sensorless control in critical operating conditions such as low speeds and speed reversal. In particular, the Carlson-Schmidt-Givens algorithm was found to be well suited for the considered drive.
This paper presents a new configuration of a main traction converter with a medium-frequency transformer (MFT) using matrix converters intended for locomotives and particularly for suburban units ...supplied by a 25-kV/50-Hz and/or 15-kV/16.7-Hz ac electrification system. Single-phase matrix converters are employed in the primary medium-voltage converter which is directly connected to the ac trolley line. The output of the primary ac/ac converter supplies the primary side of the MFT. The proposed MFT-based topology of the traction converter replaces the bulky main line transformer found on board railway vehicles. Particularly in countries with a catenary of 15 kV/16.7 Hz, very low catenary frequency results in huge and heavy traction transformers. The developed topology is a power electronics solution that considerably reduces weight and losses in a traction propulsion system. The proposed converter configuration with cascaded matrix converters on the primary side of the MFT presents a new research direction in the field of traction converters with MFTs. This paper describes in detail the proposed power circuit and the control of the traction converter. The behavior of the traction converter configuration has been analyzed using simulations and experimental tests carried out on a developed low-voltage laboratory prototype of a traction converter with a rated power of 4 kVA. Based on extensive simulation and experimental study, this paper reviews the benefits, drawbacks, and constraints of the developed traction converter configuration.
The TOTEM collaboration has measured the proton–proton total cross section at
s
=
13
TeV
with a luminosity-independent method. Using dedicated
β
∗
=
90
m
beam optics, the Roman Pots were inserted ...very close to the beam. The inelastic scattering rate has been measured by the T1 and T2 telescopes during the same LHC fill. After applying the optical theorem the total proton–proton cross section is
σ
tot
=
(
110.6
±
3.4
) mb, well in agreement with the extrapolation from lower energies. This method also allows one to derive the luminosity-independent elastic and inelastic cross sections:
σ
el
=
(
31.0
±
1.7
)
mb
and
σ
inel
=
(
79.5
±
1.8
)
mb
.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
The TOTEM experiment at the LHC has performed the first measurement at
s
=
13
TeV
of the
ρ
parameter, the real to imaginary ratio of the nuclear elastic scattering amplitude at
t
=
0
, obtaining the ...following results:
ρ
=
0.09
±
0.01
and
ρ
=
0.10
±
0.01
, depending on different physics assumptions and mathematical modelling. The unprecedented precision of the
ρ
measurement, combined with the TOTEM total cross-section measurements in an energy range larger than
10
TeV
(from 2.76 to
13
TeV
), has implied the exclusion of all the models classified and published by COMPETE. The
ρ
results obtained by TOTEM are compatible with the predictions, from other theoretical models both in the Regge-like framework and in the QCD framework, of a crossing-odd colourless 3-gluon compound state exchange in the
t
-channel of the proton–proton elastic scattering. On the contrary, if shown that the crossing-odd 3-gluon compound state
t
-channel exchange is not of importance for the description of elastic scattering, the
ρ
value determined by TOTEM would represent a first evidence of a slowing down of the total cross-section growth at higher energies. The very low-|
t
| reach allowed also to determine the absolute normalisation using the Coulomb amplitude for the first time at the LHC and obtain a new total proton–proton cross-section measurement
σ
tot
=
(
110.3
±
3.5
)
mb
, completely independent from the previous TOTEM determination. Combining the two TOTEM results yields
σ
tot
=
(
110.5
±
2.4
)
mb
.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
The TOTEM collaboration has measured the elastic proton-proton differential cross section
d
σ
/
d
t
at
s
=
13
TeV LHC energy using dedicated
β
∗
=
90
m beam optics. The Roman Pot detectors were ...inserted to 10
σ
distance from the LHC beam, which allowed the measurement of the range 0.04 GeV
2
; 4 GeV
2
in four-momentum transfer squared |
t
|. The efficient data acquisition allowed to collect about 10
9
elastic events to precisely measure the differential cross-section including the diffractive minimum (dip), the subsequent maximum (bump) and the large-|
t
| tail. The average nuclear slope has been found to be
B
=
(
20.40
±
0
.
002
stat
±
0
.
01
syst
)
GeV
-
2
in the |
t
|-range 0.04–0.2 GeV
2
. The dip position is
|
t
dip
|
=
(
0.47
±
0
.
004
stat
±
0
.
01
syst
)
GeV
2
. The differential cross section ratio at the bump vs. at the dip
R
=
1.77
±
0
.
01
stat
has been measured with high precision. The series of TOTEM elastic pp measurements show that the dip is a permanent feature of the pp differential cross-section at the TeV scale.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
The TOTEM experiment at the CERN LHC has measured elastic proton–proton scattering at the centre-of-mass energy
s
=
8
TeV and four-momentum transfers squared, |
t
|, from
6
×
10
-
4
to 0.2 GeV
2
. ...Near the lower end of the
t
-interval the differential cross-section is sensitive to the interference between the hadronic and the electromagnetic scattering amplitudes. This article presents the elastic cross-section measurement and the constraints it imposes on the functional forms of the modulus and phase of the hadronic elastic amplitude. The data exclude the traditional Simplified West and Yennie interference formula that requires a constant phase and a purely exponential modulus of the hadronic amplitude. For parametrisations of the hadronic modulus with second- or third-order polynomials in the exponent, the data are compatible with hadronic phase functions giving either central or peripheral behaviour in the impact parameter picture of elastic scattering. In both cases, the
ρ
-parameter is found to be
0.12
±
0.03
. The results for the total hadronic cross-section are
σ
tot
=
(
102.9
±
2.3
)
mb and
(
103.0
±
2.3
)
mb for central and peripheral phase formulations, respectively. Both are consistent with previous TOTEM measurements.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK