Reprocessing of spent nuclear fuel (SNF) is an important task in a frame of ecology and rational use of natural resources. Uranium, as the main component of SNF (>95%), can be recovered for further ...use as fresh nuclear fuel. To minimize an amount of solid radioactive waste generated during SNF reprocessing, new extractants are under investigation. Diamides of 1,10-phenanthroline-2,9-dicarboxylic acid are perspective tetradentate N-donor ligands that form strong complexes with f-elements, which are soluble in polar organic solvents. As an example of three ligands of this class, we conducted a comparative study and showed how the substituent in the amide functional group affects the extraction ability toward uranyl nitrate from nitric acid media. We have performed a careful study (NMR, FT-IR, XRD, RMC-EXAFS) of the structures of synthesized complexes of new ligands with uranyl nitrate and used quantum mechanical calculations to explain the discovered regularities through.
We consider two-dimensional bosonic dipoles oriented perpendicularly to the plane. On top of the usual two-body contact and long-range dipolar interactions we add a contact three-body repulsion as ...expected, in particular, for dipoles in the bilayer geometry with tunneling. The three-body repulsion is crucial for stabilizing the system, and we show that our model allows for stable continuous space supersolid states in the dilute regime and calculate the zero-temperature phase diagram.
In this work we report on new examples of phenanthrolindiamides containing asymmetric centers in amide substituents. The synthesized ligands are expected to have complex thermodynamic behavior. Their ...structure was unambiguously confirmed by a combination of spectral analysis methods and X-ray analysis. It is shown that the obtained ligands form complexes with nitrates of rare-earth elements, and the stability constants of such complexes in acetonitrile solution were also measured. The performed solvent extraction tests revealed a significant effect of methyl groups in cyclic amide substituents on the distribution ratios and selectivity factors in the lanthanides(
iii
) and Am(
iii
) series in comparison with the previously studied ligands based on unsubstituted pyrrolidine. The observed effects are explained from the standpoint of quantum chemistry calculations taking into account possible stereoisomerism.
In this work we report on new examples of phenanthrolindiamides containing asymmetric centers in amide substituents.
The composition of heavy crude oil from the Ashal’cha field (Volga-Ural Basin, Republic of Tatarstan) and the peculiarities of the changes of its asphaltenes’ structural phase characteristics in the ...model hydrothermal–catalytic system have been studied very thoroughly. It has been established that in the water vapor media the process of destruction of the heavy crude oil high-molecular-weight components with the new light fraction formation in the presence of a natural catalyst, namely, hematite, containing iron oxide and at the temperatures of 210, 250, and 300 °C respectively, takes place which has an effect on the changes in its component hydrocarbon, fractional, and structural group composition as well as in the structural parameters of its asphaltenes. As the experiments temperature increases and the water content in the reaction system decreases, the general tendency of growth the asphaltene associates aromaticity factor revealed that in turn it is accompanied by the extension (increase) of the distance between the aromatic layers and polymethylene chain fragments under the reduction of the size of associates and the number of their aromatic layers; this results from the destructive processes course, taking place along/on the most stable asphaltene heteroatomic bonds with/accompanied by further peripheral alkyl fragments breaking off, which has been confirmed by the molecular mass of the fragments above as well as destruction of vanadyl–porphyrin complexes and increase of free radicals concentration. A significant ability of asphaltene associates to immobilize their maltenes has been revealed. Within the process of oxidation cracking at the temperature of 300 °C and under the low water content in the reaction system, the increase in aromaticity and in the degree of association asphaltenes transform to carben–carboids and then to coke and are precipitated out of the oil in the solid form.
▶ Low-temperature martensitic transformation is important for beneficial effect of DCT. ▶ Plastic deformation occurs in the course of low-temperature martensitic transformation. ▶ Carbon clouds ...around dislocations are formed due to the capture of immobile carbon atoms by gliding dislocations. ▶ Carbide phase is partially dissolved during DCT.
The tool steel X220CrVMo 13-4 (DIN 1.2380) containing (mass%) 2.2C, 13Cr, 4V, 1Mo and the binary alloy Fe–2.03
mass% C were studied using transmission electron microscopy, Mössbauer spectroscopy, X-ray diffraction and internal friction with the aim of shedding light on processes occurring during deep cryogenic treatment. It is shown that the carbon atoms are essentially immobile at temperatures below −50
°C, whereas carbon clustering in the virgin martensite occurs during heating above this temperature. An increase in the density of dislocations, the capture of immobile carbon atoms by moving dislocations, the strain-induced partial dissolution of the carbide phase, and the abnormally low tetragonality of the virgin martensite are found and interpreted in terms of plastic deformation that occurs during martensitic transformation at low temperatures where the virgin martensite is sufficiently ductile.
Weakly bound dimers of fermionic atoms Petrov, D S; Salomon, C; Shlyapnikov, G V
Physical review letters,
08/2004, Letnik:
93, Številka:
9
Journal Article
Recenzirano
Odprti dostop
We discuss the behavior of weakly bound bosonic dimers formed in a two-component cold Fermi gas at a large positive scattering length a for the interspecies interaction. We find the exact solution ...for the dimer-dimer elastic scattering and obtain a strong decrease of their collisional relaxation and decay with increasing a. The large ratio of the elastic to inelastic rate is promising for achieving Bose-Einstein condensation of the dimers and cooling the condensed gas to very low temperatures.
In December 2019, the International Association of Geomagnetism and Aeronomy (IAGA) Division V Working Group (V-MOD) adopted the thirteenth generation of the International Geomagnetic Reference Field ...(IGRF). This IGRF updates the previous generation with a definitive main field model for epoch 2015.0, a main field model for epoch 2020.0, and a predictive linear secular variation for 2020.0 to 2025.0. This letter provides the equations defining the IGRF, the spherical harmonic coefficients for this thirteenth generation model, maps of magnetic declination, inclination and total field intensity for the epoch 2020.0, and maps of their predicted rate of change for the 2020.0 to 2025.0 time period.
The low-temperature martensitic transformation in steel X153CrMoV12 containing (mass%) 1.55C, 11.90Cr, 0.70V, 0.86Mo is studied using dilatometry, Mössbauer spectroscopy, X-ray diffraction, ...mechanical spectroscopy and transmission electron microscopy. Some additional measurements were carried out on steel X220CrMoV13-4. It is shown that, in contrast to the widely known absence of martensitic transformation during deep cryogenic treatment, this transformation occurs with isothermal kinetics within the temperature range of −100 down to −170°C with its largest intensity near −150°C. No transformation is observed at −196°C. The remarkable features of the isothermal martensitic transformation are: (i) the plastic deformation, which is explained by the absence of ageing of martensite at low temperatures; and (ii) the abnormally low tetragonality of martensite. In contrast to existing interpretations, the abnormally low c/a ratio is interpreted in terms of the capture of immobile carbon atoms by gliding dislocations during plastic deformation at low temperatures. A recommendation is proposed for optimizing the deep cryogenic treatment of tool steels.
The diagnostic of the peripheral plasma parameters in terms of the relation of lines of neutral helium is included in the diagnostic complex of the tokamak Globus-M2. The first measurements of the ...peripheral plasma parameters are performed near the lower X point. The measured spatial distributions of the electron temperature and density are in satisfactory agreement with the simulation with the SOLPS-ITER code.
A neutron collimator is developed to attenuate the neutron flux and reduce the residual induced activity in the interportal space of the diagnostic system of neutral particle analyzers of the ITER ...tokamak reactor. The collimator is installed in the port plug of the ITER vacuum vessel in front of an inlet to the vacuum pipeline of the diagnostic system. The collimator design has a cellular structure with 80% transparency for the neutral atom beam that goes out of the plasma and is recorded by the analyzers. However, because of increased scattering of neutrons in the collimator, their flux in the interportal room in the service zone of diagnostic systems of equatorial port no. 11 is significantly reduced and allows the equivalent dose rate in this zone to be decreased by several times. Thermal analysis showed that, during the reactor operation in modes with generation of the maximum power of 500 MW, the plasma radiation will cause the heating of the collimating grid to a temperature not exceeding 250°C, which makes it possible to select the stainless steel (316L(N)-ITER grade) as a material for manufacturing the collimator. In this case the cyclic strength of the collimator meets the ITER requirements, and it can be used without replacement during the entire deuterium-tritium experiment of the tokamak reactor.
PDF
