We present the first Ge-based constraints on sub-MeV /c2 dark matter (DM) particles interacting with electrons using a 33.4 g Ge cryogenic detector with a 0.53 electron-hole pair (rms) resolution, ...operated underground at the Laboratoire Souterrain de Modane. Competitive constraints are set on the DM-electron scattering cross section, as well as on the kinetic mixing parameter of dark photons down to 1 eV / c2. In particular, the most stringent limits are set for dark photon DM in the 6 to 9 eV / c2 range. These results demonstrate the high relevance of Ge cryogenic detectors for the search of DM-induced eV-scale electron signals.
In this work we present how to fabricate large-area (15 cm2), ultra-low threshold germanium bolometric photo-detectors and how to operate them to detect few (optical) photons. These detectors work at ...temperatures as low as few tens of mK and exploit the Neganov-Trofimov-Luke (NTL) effect. They are operated as charge-to-heat transducers: the heat signal is linearly increased by simply changing a voltage bias applied to special metal electrodes, fabricated onto the germanium absorber, and read by a (NTD-Ge) thermal sensor. We fabricated a batch of five prototypes and ran them in different facilities with dilution refrigerators. We carefully studied how impinging spurious infrared radiation impacts the detector performances, by shining infrared photons via optical-fiber-guided LED signals, in a controlled manner, into the bolometers. We hence demonstrated how the radiation-tightness of the test environment tremendously enhances the detector performances, allowing to set electrode voltage bias up to 90 volts without any leakage current and signal-to-noise gain as large as a factor 12 (for visible photons). As consequence, for the first time we could operate large-area NTD-Ge-sensor-equipped NTL bolometric photo-detectors capable to reach sub 10-eV baseline noise (RMS). Such detectors open new frontiers for rare-event search experiments based on low light yield Ge-NTD equipped scintillating bolometers, such the CUPID neutrinoless double-beta decay experiment.
A new R&D on lithium molybdate scintillators has begun within a project CLYMENE (Czochralski growth of Li2MoO4 crYstals for the scintillating boloMeters used in the rare EveNts sEarches). One of the ...main goals of the CLYMENE is a realization of a Li2MoO4 crystal growth line to be complementary to the one recently developed by LUMINEU in view of a mass production capacity for CUPID, a next-generation tonne-scale bolometric experiment to search for neutrinoless double-beta decay. In the present paper we report the investigation of performance and radiopurity of 158-g and 13.5-g scintillating bolometers based on a first large-mass (230 g) Li2MoO4 crystal scintillator developed within the CLYMENE project. In particular, a good energy resolution (2–7 keV FWHM in the energy range of 0.2–5 MeV), one of the highest light yield (0.97 keV/MeV) amongst Li2MoO4 scintillating bolometers, an efficient alpha particles discrimination (10σ) and potentially low internal radioactive contamination (below 0.2–0.3 mBq/kg of U/Th, but 1.4 mBq/kg of 210Po) demonstrate prospects of the CLYMENE in the development of high quality and radiopure Li2MoO4 scintillators for CUPID.
•820 g LMO crystal grown by the Czochralski method.•LMO elastic properties and stress anisotropies evaluated.•Concave tail shape generates more stresses than convex ones.
A new technology for the ...mass production of lithium molybdate (Li2MoO4) crystals needed for the realization of the cryogenic neutrinoless double-beta decay detectors is under development within the framework of the CLYMENE project. Crystals with 4 and 5 cm in diameter were grown in two different Czochralski configurations. The first configuration, based on inductive heating of a RF coil coupled with a platinum crucible, was used to grow crystals of 4 cm in diameter. Bolometric tests performed with two samples cut from a 230 g crystal have shown less performances of the large sample (158 g), which had a cleavage, as compared to the small non-cracked sample (13.5 g). Numerical modeling was applied to investigate the temperature field in the furnace, the melt convection and thermo-elastic stresses in the crystal. Numerical results reveal 30% higher thermal stress at the bottom part of the ingot in the case of a concave shape of the crystal tail (experimental case) as compared to the case of a convex shaped tail. This could explain why the fracture started at the bottom part of the 230 g crystal boule, and highlights the importance of the crystal shape in the last stage of growth process. The furnace configuration used to grow 5 cm-diameter crystals was numerically optimized in order to reduce the thermal stress in the crystals. The first kg-mass Li2MoO4 ingot grown in the optimized configuration exhibit regular shape and good structural quality.
We make use of the EDELWEISS-III array of germanium bolometers to search for electron interactions at the keV scale induced by phenomena beyond the Standard Model. A 90% C.L. lower limit is set on ...the electron lifetime decaying to invisibles, ?>1.2×1024 years. We investigate the emission of axions or axionlike particles (ALPs) by the Sun, constraining the coupling parameters gae<1.1×10?11 and gae×gaNeff<3.5×10?17 at 90% C.L. in the massless limit. We also directly search for the absorption of bosonic dark matter particles that would constitute our local galactic halo. Limits are placed on the couplings of ALPs or hidden photon dark matter in the mass range 0.8–500 keV/c2. Prospects for searching for dark matter particles with masses down to 150 eV/c2 using improved detectors are presented.
Abstract
The development of low-threshold detectors for the study of
coherent elastic neutrino-nucleus scattering and for the search for
light dark matter necessitates methods of low-energy ...calibration. We
suggest this can be provided by the nuclear recoils resulting from
the γ emission following thermal neutron capture. In
particular, several MeV-scale single-γ transitions induce
well-defined nuclear recoil peaks in the 100 eV range. Using the
FIFRELIN code, complete schemes of γ-cascades for various
isotopes can be predicted with high accuracy to determine the
continuous background of nuclear recoils below the calibration
peaks. We present a comprehensive experimental concept for the
calibration of CaWO
4
and Ge cryogenic detectors at a research
reactor. For CaWO
4
the simulations show that two nuclear recoil
peaks at 112.5 eV and 160.3 eV should be visible above background
simply in the spectrum of the cryogenic detector. Then we discuss
how the additional tagging for the associated γ increases the
sensitivity of the method and extends its application to a wider
energy range and to Ge cryogenic detectors.
The first observation of coherent elastic neutrino-nucleus scattering (CEνNS), reported by the COHERENT Collaboration in 2017, paved the way for a new generation of experiments using reactor ν̄e and ...aiming at precisely measuring this process. In this context, the BASKET (Bolometers At Sub-KeV Energy Thresholds) R&D project investigates the use of cryogenic detectors for a reactor CEνNS experiment. This article reports on the first test of a Mo-doped lithium tungstate scintillating bolometer (⊘18 × 7 mm, 8 g), performed in an aboveground laboratory at CSNSM, Orsay (France). The detector bolometric performance (energy and time response, particle identification capabilities) and radiopurity have been studied and confirm the promising potential of lithium tungstate-based bolometric detectors for the measurement of CEνNS at reactors.