We present the first experimental evidence supported by simulations of kinetic effects launched in the interpenetration layer between the laser-driven hohlraum plasma bubbles and the corona plasma of ...the compressed pellet at the Shenguang-III prototype laser facility. Solid plastic capsules were coated with carbon-deuterium layers; as the implosion neutron yield is quenched, DD fusion yield from the corona plasma provides a direct measure of the kinetic effects inside the hohlraum. An anomalous large energy spread of the DD neutron signal (∼282 keV) and anomalous scaling of the neutron yield with the thickness of the carbon-deuterium layers cannot be explained by the hydrodynamic mechanisms. Instead, these results can be attributed to kinetic shocks that arise in the hohlraum-wall-ablator interpenetration region, which result in efficient acceleration of the deuterons (∼28.8 J, 0.45% of the total input laser energy). These studies provide novel insight into the interactions and dynamics of a vacuum hohlraum and near-vacuum hohlraum.
Display omitted
► LSP can generate high-level compressive residual stresses and refine original grains. ► Massive LSP impacts can effectively prevent the SCC initiation of the U-bend sample. ► ...Mechanism of massive LSP impacts on SCC was also entirely revealed.
The effects of massive laser peening (LP) impacts on surface residual stress, micro-structure, and stress corrosion cracking (SCC) behaviour of U-bend samples were investigated by X-ray diffraction (XRD) technology, optical microscope (OM) and transmission electron microscope (TEM) observations. Two important factors to influence SCC initiation, residual stress and grain refinement, were discussed in detail by using different types of treatment processes. Results showed massive LP impacts can induce both deep compressive residual stress and refined grains in the surface layer of ANSI 304 stainless steel, and the corrosion mechanism of massive LP impacts on SCC was also analysed and revealed.
Background. Seven persons in one family living in eastern China developed fever and thrombocytopenia during May 2007, but the initial investigation failed to identify an infectious etiology. In ...December 2009, a novel bunyavirus (designated severe fever with thrombocytopenia syndrome bunyavirus SFTSV) was identified as the cause of illness in patients with similar clinical manifestations in China. We reexamined this family cluster for SFTSV infection. Methods. We analyzed epidemiological and clinical data for the index patient and 6 secondary patients. We tested stored blood specimens from the 6 secondary patients using real time reverse transcription polymerase chain reaction (RT-PCR), viral culture, genetic sequencing, micro-neutralization assay (MNA), and indirect immunofluorescence assay (IFA). Results. An 80-year-old woman with fever, leucopenia, and thrombocytopenia died on 27 April 2007. Between 3 and 7 May 2007, another 6 patients from her family were admitted to a local county hospital with fever and other similar symptoms. Serum specimens collected in 2007 from these 6 patients were positive for SFTS viral RNA through RT-PCR and for antibody to SFTSV through MNA and IFA. SFTSV was isolated from 1 preserved serum specimen. The only shared characteristic between secondary patients was personal contact with the index patient; none reported exposure to suspected animals or vectors. Conclusions. Clinical and laboratory evidence confirmed that the patients of fever and thrombocytopenia occurring in a family cluster in eastern China in 2007 were caused by a newly recognized bunyavirus, SFTSV. Epidemiological investigation strongly suggests that infection of secondary patients was transmitted to family members by personal contact.
Topological insulators and graphene present two unique classes of materials, which are characterized by spin-polarized (helical) and nonpolarized Dirac cone band structures, respectively. The ...importance of many-body interactions that renormalize the linear bands near Dirac point in graphene has been well recognized and attracted much recent attention. However, renormalization of the helical Dirac point has not been observed in topological insulators. Here, we report the experimental observation of the renormalized quasiparticle spectrum with a skewed Dirac cone in a single Bi bilayer grown on Bi ₂Te ₃ substrate from angle-resolved photoemission spectroscopy. First-principles band calculations indicate that the quasiparticle spectra are likely associated with the hybridization between the extrinsic substrate-induced Dirac states of Bi bilayer and the intrinsic surface Dirac states of Bi ₂Te ₃ film at close energy proximity. Without such hybridization, only single-particle Dirac spectra are observed in a single Bi bilayer grown on Bi ₂Se ₃, where the extrinsic Dirac states Bi bilayer and the intrinsic Dirac states of Bi ₂Se ₃ are well separated in energy. The possible origins of many-body interactions are discussed. Our findings provide a means to manipulate topological surface states.
► Weldments were done with laser shock processing impacts after cavitation erosion. ► Laser shock processing enhanced the erosion and corrosion resistance of weldments. ► Tensile residual stress and ...surface roughness decreased by laser shock processing. ► Microstructure was observed to explain the improvement by laser shock processing. ► Obvious passivation areas occurred with laser shock processing impacts.
Effects of laser shock processing (LSP) on electrochemical corrosion resistance of weldments after cavitation erosion were investigated by X-ray diffraction (XRD) technology, scanning electron microscope (SEM), roughness tester and optical microscope (OM). Some main factors to influence erosion and corrosion of weldments, residual stresses, surface roughness, grain refinements and slip, were discussed in detail. Results show that LSP impacts can induce compressive residual stresses, decrease surface roughness, refine grains and generate the slip. Thus, the erosion and corrosion resistance with LSP impacts is improved.
The protein serine/threonine phosphatases-1 and -2A are major cellular phosphatases, playing a fundamental role in organisms from prokaryotes to eukaryotes. They contribute to 90% dephosphorylation ...in eukaryote proteins. In the eye, both phosphatases are highly expressed and display important functions in regulating normal eye development. Moreover, they are implicated in pathogenesis through modulation of stress-induced apoptosis. Here we review the recent progresses on these aspects.
Electromagnetic pulse (EMP) treatment was firstly applied during the preparation process of CoCrFeNiCu high entropy alloy (HEA) and its mechanism was illustrated. The crystal structure, ...microstructure, mechanical properties, and corrosion properties of CoCrFeNiCu HEAs in current and magnetizing directions with different EMP frequencies were characterized. The results demonstrated that EMP can significantly influence the lattice parameter, microstructure, enhance mechanical and alter corrosion properties. When EMP applied, the dendrite arms were severely coarsened and the microstructure changed from typical dendrite to quasi-equiaxed morphology. The hardness and yield strength were increased by 18% and 23%, respectively. Meanwhile, corrosion current density decreased from 5.4 μA cm−2 to 1.4 μA cm−2. Anisotropy effect was revealed between the current and magnetizing directions in the same ingot, which is seldom reported before. The gap of interplanar distances, mechanical properties and corrosion properties between these two perpendicular directions became smaller and close to each other with increasing EMP frequency.
Graphene oxide (GO) sheets were chemically grafted with thermotropic liquid crystalline epoxy (TLCP). Then we fabricated composites using TLCP-g-GO as reinforcing filler. The mechanical properties ...and thermal properties of composites were systematically investigated. It is found that the thermal and mechanical properties of the composites are enhanced effectively by the addition of fillers. For instance, the composites containing 1.0 wt% of TLCP-g-GO present impact strength of 51.43 kJ/m2, the tensile strength of composites increase from 55.43 to 80.85 MPa, the flexural modulus of the composites increase by more than 48%. Furthermore, the incorporation of fillers is effective to improve the glass transition temperature and thermal stability of the composites. Therefore, the presence of the TLCP-g-GO in the epoxy matrix could make epoxy not only stronger but also tougher.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, UILJ, UKNU, UL, UM, UPUK
Ferrite samples with the composition Co1+xFe2axO4 (0.0 less than or equal to x less than or equal to 2.0) were prepared by chemical co-precipitation. The samples exhibited an (A)B2O4 single phase ...cubic spinel structure. Magnetic measurements indicated that the saturation moment M of the samples at 10 K decreased from a maximum of 3.16 mu B/formula for x = 0.0 to a minimum of 0.0 mu B/formula for x = 2.0, with a local minimum at x = 1.4. The cation distribution of the samples was estimated by fitting dependence of M on x at 10 K. The Co ions content at the (A) sites estimated by us are close to the corresponding experimental results reported by Ferreira using Mossbauer spectrum.
Abstract
With the rapid development and wide application of cryogenic, superconducting and space technologies in engineering fields, measurements of the mechanical properties especially the tensile ...properties of small-sized samples at cryogenic temperatures are more and more important. In this study, a tensile property measuring system for miniaturized samples was designed and built, where the samples can be measured from 300 K to 70 K with a resolution of 0.1 K. The cryogenic environment was provided by a pulse tube cryocooler. The force load applied to the sample was up to 10 N with a resolution of 0.001 N. The structure of the cryogenic system and sample holders were specially designed for miniaturized samples. A control and automatic data acquisition system was used to control and acquire data from all devices of the instrument. The simulations of the stretching part under load at cryogenic temperature were performed to ensure the measurement accuracy and reliability. To verify the performance and accuracy of the system, the tensile properties of two kinds of fine high-purity copper wires were measured at both 77 K and 300 K. The tensile measurement results were discussed and the measurement uncertainty of the system was analyzed. With different clamps more kinds of mechanical measurements of miniaturized samples can be carried out on this system.
PDF
