•A numerical analysis is performed for direct liquid cooling of lithium-ion batteries using different dielectric fluids.•Study and compared the thermal performance of three different dielectric ...fluids including mineral oil, deionised water, and one engineered fluid.•The temperature rise is limited to below 3 °C for 1c- discharge by using deionised water at all mass flow rates, where oil-based fluids are delivering better performance only at higher mass flow rates of 0.05 kg/s.•The mineral oil and engineered fluids deliver almost an equal thermal performance, however, the latter consumed 76.43% less power at a mass flow rate of 0.05 kg/s.
Lithium-ion battery (LIB) cells are responsible for powering most electric vehicles. LIB is still a superior battery available in the market because of its high energy density, specific power, and long cycle life. However, LIB comes with the challenges like thermal management as it is highly sensitive to temperature. Amongst different cooling methods, direct liquid cooling, also known as immersion cooling, can deliver a high cooling rate mainly because of its complete contact with the heat source. The single-phase liquid immersion with dielectric fluids (DELC) offers safety and cooling performance with lower parasitic power consumption and space requirements. This research involves studying and comparing different DELC's for the direct cooling of lithium-ion batteries. A numerical analysis of the 4S1P arrangement of LIB cells with direct cooling is conducted with three different DELC's including deionised water, mineral oil, and an engineered fluid. The transient behaviour of the battery module for various mass flow rates of DELC and at 1C,2C,3C-discharge rates are examined. All DELC maintains an excellent temperature homogeneity within the individual cells and LIB cells. The DELC with higher specific heat and thermal conductivity is suitable for cooling the LIB cells during high discharge conditions. However, all the dielectric fluids studied here effectively limit the temperature rise below 5 °C at 2-C discharging operation when the mass flow rate is increased to 0.05 kg/s. This improvement in thermal performance comes at the expense of extra power consumption. Even though both DELC-2 and DELC -3 delivered almost similar temperature rise values of 6.1, 5.2 °C, respectively during 2C discharging operation, the latter consumed 76.43% less power at a mass flow rate of 0.05 kg/s. For this reason, engineered fluids with lower viscosity values can be preferred over mineral oils. The deionised water is more effective for limiting the temperature rise below 2.2 °C for 3C discharging with the least parasitic power consumption of 0.52 mW at a mass flow rate of 0.05 kg/s. A variable cyclic load matching HWFET-driving cycle has been applied to the battery pack with all three DELCs, and all three fluids limited temperature rise below 1 °C.
Purpose
This paper aims to provide a review of four-dimensional (4D) printing of shape memory polymers using inkjet printing technology. 4D printing refers to the three-dimensional (3D) printing of ...smart materials capable of shape change or function modification with respect to time when activated by external stimuli. Inkjet printing has gained popularity because of the technical advantages such as non-contact deposition, multi-material printing, high resolution, high speed of printing and minimal post processing. This review will serve as a platform for understanding the inkjet 4D printing process and the shape memory capability of the polymer structures printed using inkjet printing.
Design/methodology/approach
The approach used in this review was to search for and review research works related to inkjet 4D printing of shape memory polymers. The search period was limited for the duration 2013 to 2021 as the 4D printing technology came into light later in 2013. With the review of inkjet 4D printing of shape memory polymers, the shape memory capability of the inkjet-printed structures were also studied.
Findings
With the available research documents, it was found that the inkjet 4D printing technology gained momentum from 2016, three years after the introduction of the 4D printing technology. The key findings of this review show that inkjet 4D printing of shape memory polymers were primarily performed using commercial inkjet printers and polymer inks linked to the printers. Even though the inkjet printing technology is matured enough to print multiple materials, development of shape memory polymer inks for inkjet printability remains complex. To realize the full potential of inkjet 4D printing, novel polymer inks specific for inkjet printing needs development.
Research limitations/implications
The major limitation to this review was the availability of research papers for review. Even though inkjet printing technology has grown to popularity in the graphics printing and publishing industry since its inception in the 19th century, the technology still needs to evolve in the printing of 3D structures due to the limitations in synthesizing inks that are inkjet printable. However, this research will serve as a platform for understating the current status of inkjet 4D printing and the limitations of the technology.
Originality/value
This review focuses only on the inkjet 4D printing of shape memory polymers among the generally summarized 4D printing review papers available. Currently, 4D printing of shape memory polymers is carried out using only the commercially available polymer printers. Also, researchers do not have the flexibility of modifying the polymer inks linked to the printers. This review can spur more research into the development of novel polymer inks specific for inkjet printing.
Despite the accepted usage of 'marginality' as a subcategory of subalternity, seldom has the meaning of marginality as a concept been expounded. This paper sets out to address this lack by conceiving ...of 'marginality' as a condition, by focusing on the lived experiences of Adivasis in Kerala through the discourses constructed by a contemporary social movement, the Adivasi Gothra Maha Sabha (AGMS). Discourse analysis is the methodological frame that I have used in this paper to analyse the descriptions produced by the AGMS and the state of Kerala, and this is broadly situated within the post-colonial political-sociological approach. Premised on this, I argue that while marginality is an essential concept for looking at contemporary Adivasi movements in India, it is productive to interrogate and explore expanding the varied meanings attached to this concept.
Previous efforts to report estimates of cancer incidence and mortality in India and its different parts include the National Cancer Registry Programme Reports, Sample Registration System cause of ...death findings, Cancer Incidence in Five Continents Series, and GLOBOCAN. We present a comprehensive picture of the patterns and time trends of the burden of total cancer and specific cancer types in each state of India estimated as part of the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2016 because such a systematic compilation is not readily available.
We used all accessible data from multiple sources, including 42 population-based cancer registries and the nationwide Sample Registration System of India, to estimate the incidence of 28 types of cancer in every state of India from 1990 to 2016 and the deaths and disability-adjusted life-years (DALYs) caused by them, as part of GBD 2016. We present incidence, DALYs, and death rates for all cancers together, and the trends of all types of cancers, highlighting the heterogeneity in the burden of specific types of cancers across the states of India. We also present the contribution of major risk factors to cancer DALYs in India.
8·3% (95% uncertainty interval UI 7·9–8·6) of the total deaths and 5·0% (4·6–5·5) of the total DALYs in India in 2016 were due to cancer, which was double the contribution of cancer in 1990. However, the age-standardised incidence rate of cancer did not change substantially during this period. The age-standardised cancer DALY rate had a 2·6 times variation across the states of India in 2016. The ten cancers responsible for the highest proportion of cancer DALYs in India in 2016 were stomach (9·0% of the total cancer DALYs), breast (8·2%), lung (7·5%), lip and oral cavity (7·2%), pharynx other than nasopharynx (6·8%), colon and rectum (5·8%), leukaemia (5·2%), cervical (5·2%), oesophageal (4·3%), and brain and nervous system (3·5%) cancer. Among these cancers, the age-standardised incidence rate of breast cancer increased significantly by 40·7% (95% UI 7·0–85·6) from 1990 to 2016, whereas it decreased for stomach (39·7%; 34·3–44·0), lip and oral cavity (6·4%; 0·4–18·6), cervical (39·7%; 26·5–57·3), and oesophageal cancer (31·2%; 27·9–34·9), and leukaemia (16·1%; 4·3–24·2). We found substantial inter-state heterogeneity in the age-standardised incidence rate of the different types of cancers in 2016, with a 3·3 times to 11·6 times variation for the four most frequent cancers (lip and oral, breast, lung, and stomach). Tobacco use was the leading risk factor for cancers in India to which the highest proportion (10·9%) of cancer DALYs could be attributed in 2016.
The substantial heterogeneity in the state-level incidence rate and health loss trends of the different types of cancer in India over this 26-year period should be taken into account to strengthen infrastructure and human resources for cancer prevention and control at both the national and state levels. These efforts should focus on the ten cancers contributing the highest DALYs in India, including cancers of the stomach, lung, pharynx other than nasopharynx, colon and rectum, leukaemia, oesophageal, and brain and nervous system, in addition to breast, lip and oral cavity, and cervical cancer, which are currently the focus of screening and early detection programmes.
Bill & Melinda Gates Foundation; and Indian Council of Medical Research, Department of Health Research, Ministry of Health and Family Welfare, Government of India.
•Iterative Adaptive Inverse Filtering extracts the glottal excitation information.•Excitation source information is extracted from high-frequency band.•CQCC algorithm is used to extract the feature ...from high-frequency band.•Gaussian mixture model is used as a classifier to detect replayed speech.•The experimental studies done on ASV spoof-2017 version 2.0 database.
Replay attack is most vulnerable to automatic speaker verification system, where the frauds get the access by replaying pre-recorded voice samples of the genuine speakers. In this proposed work, we mainly concentrated on glottal excitation and high frequency band. First, we demonstrate the importance of the glottal information of the speech signals to detect the replay attack for speaker verification system along with magnitude based discrimination power features set. Iterative Adaptive Inverse Filtering (IA-IF) technique is used to extract the glottal excitation information of the given speech spectrum which shows the difference in the characteristics of genuine and replayed speech sample. Using this technique the glottal information is gained by eliminating the lip radiation and vocal tract effect by applying the integration and inverse filtering respectively. Secondly, we have shown the prominence and discriminative information to detect the replayed attack which is present in high frequency band of the speech spectrums of genuine and replayed samples. Finally, Constant-Q Cepstral Coefficients (CQCC) is used to extract desired features set from the high-frequency bands of glottal excitation spectrum. From the experimental studies done on ASV spoof-2017 version 2.0 database it shows that the proposed method feature set significantly decreases the Equal Error Rate (EER) to 3.68% and 8.32% for development and evaluation set when compare to other state-of-art method feature set.
Chickpea has a profound nutritional and economic value in vegetarian society. Continuous decline in chickpea productivity is attributed to insufficient genetic variability and different environmental ...stresses. Chickpea like several other legumes is highly susceptible to terminal drought stress. Multiple genes control drought tolerance and ASR gene plays a key role in regulating different plant stresses. The present study describes the molecular characterization and functional role of Abscissic acid and stress ripening (ASR) gene from chickpea (Cicer arietinum) and the gene sequence identified was submitted to NCBI Genbank (MK937569). Molecular analysis using MUSCLE software proved that the ASR nucleotide sequences in different legumes show variations at various positions though ASR genes are conserved in chickpea with only few variations. Sequence similarity of ASR gene to chickpea putative ABA/WDS induced protein mRNA clearly indicated its potential involvement in drought tolerance. Physiological screening and qRT-PCR results demonstrated increased ASR gene expression under drought stress possibly enabled genotypes to perform better under stress. Conserved domain search, protein structure analysis, prediction and validation, network analysis using Phyre2, Swiss-PDB viewer, ProSA and STRING analysis established the role of hypothetical ASR protein NP_001351739.1 in mediating drought responses. NP_001351739.1 might have enhanced the ASR gene activity as a transcription factor regulating drought stress tolerance in chickpea. This study could be useful in identification of new ASR genes that play a major role in drought tolerance and also develop functional markers for chickpea improvement.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
The FORMOSAT‐7/COSMIC‐2 (F7/C2) satellite mission was launched on 25 June 2019 with six low‐Earth‐orbit satellites and can provide thousands of daily radio occultation (RO) soundings in the ...low‐latitude and midlatitude regions. This study shows the preliminary results of space weather data products based on F7/C2 RO sounding: global ionospheric specification (GIS) electron density and Ne‐aided Abel and Abel electron density profiles. GIS is the ionospheric data assimilation product based on the Gauss‐Markov Kalman filter, assimilating the ground‐based Global Positioning System and space‐based F7/C2 RO slant total electron content, providing continuous global three‐dimensional electron density distribution. The Ne‐aided Abel inversion implements four‐dimensional climatological electron density constructed from previous RO observations, which has the advantage of providing altitudinal information on the horizontal gradient to reduce the retrieval error due to the spherical symmetry assumption of the Abel inversion. The comparisons show that climatological structures are consistent with each other above 300 km altitude. Both the Abel electron density profiles and GIS detect electron density variations during a minor geomagnetic storm that occurred within the study period. Moreover, GIS is further capable of reconstructing the variation of equatorial ionization anomaly crests. Detailed validations of all the three products are carried out using manually scaled digisonde NmF2 (hmF2), yielding correlation coefficients of 0.885 (0.885) for both Abel inversions and 0.903 (0.862) for GIS. The results show that both GIS and Ne‐aided Abel are reliable products in studying ionosphere climatology, with the additional advantage of GIS for space weather research and day‐to‐day variations.
Plain Language Summary
This study presents two ionosphere products from the innovative satellite constellation mission launched recently. Global ionospheric specification is an ionospheric data product that assimilates ground‐based Global Positioning System and FORMOSAT‐7/COSMIC‐2 radio occultation observation of total electron content, to generate hourly global three‐dimensional electron density for monitoring space weather condition. Ne‐aided Abel electron density profile is an improved retrieval product of FORMOSAT‐7/COSMIC‐2 radio occultation observations by imposing asymmetry information of ionosphere to mitigate the error introduced by the assumption of spherical symmetry in the Abel inversion. The comparisons and validations confirm that these two data products are reliable for the study of ionosphere climatology and weather. They are operationally produced and released at Taiwan Analysis Center for COSMIC.
Key Points
All the three F7/C2 products capture similar climatological structure of ionosphere in longitudes (Wave 4) and latitudes (EIA crests)
Abel electron density profiles detect responses to geomagnetic storm, but GIS performs better in reconstructing the EIA crests variations
Digisonde validations demonstrate that the GIS NmF2 has excellent performance when there are RO observations available for assimilation
This study investigates new characteristics of ionospheric modulations driven by quasi‐6‐day wave (Q6DW) burst following a rare Antarctic sudden stratospheric warming (SSW) in September 2019. ...Local‐time and vertical variations of the amplitude and phase of quasi‐6‐day oscillation (Q6DO) in the ionosphere are examined by using data assimilation analysis of electron density from three‐dimensional Global Ionosphere Specification (GIS). The maximum amplitudes of Q6DO are located symmetrically ±20° off the magnetic equator at ~12 LT, with a secondary peak at 17 LT. The amplitude of Q6DO weakens at 15 LT, with a sudden phase shift, suggesting multiple dynamo processes driving the Q6DO‐related ionospheric variations. The altitude‐latitude structure of Q6DO shows that the ionospheric modulations extend beyond the equatorial ionization anomaly, indicating the wind dynamo source regions at higher latitudes. A likely physical mechanism is discussed based on possible interactions of Q6DW and semidiurnal migrating tides leading to the dynamo modulation and phase differences.
Plain Language Summary
Sudden stratospheric warming (SSW) is an extreme meteorological phenomenon in the polar stratosphere, which usually occurs in the Northern Hemisphere. Numerous studies have shown that the SSW can significantly disturb the entire atmosphere from the troposphere all the way to the upper thermosphere and ionosphere. In September 2019, a rare and record‐breaking SSW occurred in the Antarctic region, providing an opportunity to investigate the ionospheric variabilities connected to the Antarctic SSW, which is seldom explored. In this study, we present observations of the time evolution and vertical structure of quasi‐6‐day oscillation (Q6DO) in the ionosphere generated from the unusually large quasi‐6‐day wave (Q6DW) in the mesosphere and lower thermosphere. Our results show that the observed Q6DO behavior in the ionosphere is quite different from climatological characteristics in the local time and vertical structure, which indicates that the coupling mechanisms driving the ionospheric variability are complex due to the presence of Antarctic SSW.
Key Points
Local time and vertical structures of the quasi‐6‐day oscillation (Q6DO) in the global ionosphere during the 2019 Antarctic SSW are examined
Unlike the climatological Q6DO that peaks only at 16 LT, the Q6DO peaks at 12 LT and 17 LT during this sudden stratospheric warming (SSW)
Longitude shift of the two Q6DO peaks implies more than one quasi‐6‐day wave related perturbations are competing in the dynamo process
This study presents the conjugate ionospheric disturbances triggered by the 2011 Tohoku-Oki
reflected tsunami oceanic waves using the ground-based Global Navigation Satellite System (GNSS) total ...electron content (TEC) observations. We found that the equatorward and westward propagating nighttime medium-scale traveling ionospheric disturbances (MSTIDs) occurred over Japan and Australia simultaneously following the tsunami oceanic waves reflected by the Emperor Seamount Chain in the northern hemisphere. The atmospheric gravity waves driven by reflected tsunami oceanic waves are hypothesized to be the source to trigger the conjugate MSTIDs by transporting the polarization electric fields along the field line to the conjugate hemisphere. Moreover, only the southwestward propagating MSTIDs have this conjugate
effect, which could be due to the wavefront orientation. The Perkins instability could also be involved in the interhemispheric coupling process. This study provides the first observational evidence that the reflected tsunami can induce conjugate ionospheric disturbances through electrodynamic forcing.
Gastrointestinal symptoms are prevalent extrapulmonary systemic manifestations of Chronic Obstructive Pulmonary Disease (COPD), but have been rarely studied. We dissected the perturbations in ...intestinal function in human patients with COPD using comprehensive metabolic and physiological approaches.
In this observational study, small intestinal membrane integrity and active carrier-mediated glucose transport were quantified by sugar permeability test in 21 clinically stable patients with moderate to severe COPD (mean FEV1, 41.2 (3.2) % of predicted) and 16 healthy control subjects. Protein digestion and absorption was analyzed using stable tracer kinetic methods. Plasma acetate, propionate, and butyrate concentrations were measured as markers of intestinal microbial metabolism.
Compared with healthy controls, non carrier-mediated permeability was higher (0.062 (95% CI 0.046, 0.078) vs. 0.037 (95% CI 0.029, 0.045), P = 0.009) and active glucose transport lower in COPD (31.4 (95% CI 23.4, 39.4)% vs. 48.0 (95% CI 37.8, 58.3)%, P = 0.010). Protein digestion and absorption was lower in COPD (0.647 (95% CI 0.588, 0.705) vs. 0.823 (95% CI 0.737, 0.909), P = 0007), and impairment greater in patients with dyspnea (P = 0.038), exacerbations in preceding year (P = 0.052), and reduced transcutaneous oxygen saturation (P = 0.051), and was associated with reduced physical activity score (P = 0.016) and lower quality of life (P = 0.0007). Plasma acetate concentration was reduced in COPD (41.54 (95% CI 35.17, 47.91) vs. 80.44 (95% CI 54.59, 106.30) μmol/L, P = 0.001) suggesting perturbed intestinal microbial metabolism.
We conclude that intestinal dysfunction is present in COPD, worsens with increasing disease severity, and is associated with reduced quality of life.
PDF
