The South Pole Telescope (SPT) has systematically identified 81 high-redshift, strongly gravitationally lensed, dusty star-forming galaxies (DSFGs) in a 2500 square degree cosmological ...millimeter-wave survey. We present the final spectroscopic redshift survey of this flux-limited (S870 m > 25 mJy) sample, initially selected at 1.4 mm. The redshift survey was conducted with the Atacama Large Millimeter/submillimeter Array across the 3 mm spectral window, targeting carbon monoxide line emission. By combining these measurements with ancillary data, the SPT sample is now spectroscopically complete, with redshifts spanning 1.9 < z < 6.9 and a median of . We present the millimeter through far-infrared photometry and spectral energy density fits for all sources, along with their inferred intrinsic properties. Comparing the properties of the SPT sources to the unlensed DSFG population, we demonstrate that the SPT-selected DSFGs represent the most extreme infrared-luminous galaxies, even after accounting for strong gravitational lensing. The SPT sources have a median star formation rate of and a median dust mass of . However, the inferred gas depletion timescales of the SPT sources are comparable to those of unlensed DSFGs, once redshift is taken into account. This SPT sample contains roughly half of the known spectroscopically confirmed DSFGs at z > 5, making this the largest sample of high-redshift DSFGs to date, and enabling the "high-redshift tail" of extremely luminous DSFGs to be measured. Though galaxy formation models struggle to account for the SPT redshift distribution, the larger sample statistics from this complete and well-defined survey will help inform future theoretical efforts.
Controlled formation of non-equilibrium crystal structures is one of the most important challenges in crystal growth. Catalytically grown nanowires are ideal systems for studying the fundamental ...physics of phase selection, and could lead to new electronic applications based on the engineering of crystal phases. Here we image gallium arsenide (GaAs) nanowires during growth as they switch between phases as a result of varying growth conditions. We find clear differences between the growth dynamics of the phases, including differences in interface morphology, step flow and catalyst geometry. We explain these differences, and the phase selection, using a model that relates the catalyst volume, the contact angle at the trijunction (the point at which solid, liquid and vapour meet) and the nucleation site of each new layer of GaAs. This model allows us to predict the conditions under which each phase should be observed, and use these predictions to design GaAs heterostructures. These results could apply to phase selection in other nanowire systems.
We have formed compositionally abrupt interfaces in silicon-germanium (Si-Ge) and Si-SiGe heterostructure nanowires by using solid aluminum-gold alloy catalyst particles rather than the conventional ...liquid semiconductor-metal eutectic droplets. We demonstrated single interfaces that are defect-free and close to atomically abrupt, as well as quantum dots (i.e., Ge layers tens of atomic planes thick) embedded within Si wires. Real-time imaging of growth kinetics reveals that a low solubility of Si and Ge in the solid particle accounts for the interfacial abruptness. Solid catalysts that can form functional group IV nanowire-based structures may yield an extended range of electronic applications.
Nanowires are conventionally assumed to grow via the vapor-liquid-solid process, in which material from the vapor is incorporated into the growing nanowire via a liquid catalyst, commonly a ...low--melting point eutectic alloy. However, nanowires have been observed to grow below the eutectic temperature, and the state of the catalyst remains controversial. Using in situ microscopy, we showed that, for the classic Ge/Au system, nanowire growth can occur below the eutectic temperature with either liquid or solid catalysts at the same temperature. We found, unexpectedly, that the catalyst state depends on the growth pressure and thermal history. We suggest that these phenomena may be due to kinetic enrichment of the eutectic alloy composition and expect these results to be relevant for other nanowire systems.
Nanowire growth by the vapour-liquid-solid (VLS) process enables a high level of control over nanowire composition, diameter, growth direction, branching and kinking, periodic twinning, and crystal ...structure. The tremendous impact of VLS-grown nanowires is due to this structural versatility, generating applications ranging from solid-state lighting and single-photon sources to thermoelectric devices. Here, we show that the morphology of these nanostructures can be further tailored by using the liquid droplets that catalyse nanowire growth as a 'mixing bowl', in which growth materials are sequentially supplied to nucleate new phases. Growing within the liquid, these phases adopt the shape of faceted nanocrystals that are then incorporated into the nanowires by further growth. We demonstrate this concept by epitaxially incorporating metal-silicide nanocrystals into Si nanowires with defect-free interfaces, and discuss how this process can be generalized to create complex nanowire-based heterostructures.
Summary
Almost a quarter of patients with PAO will sustain a subsequent fracture; patients need to be informed about potential risks before deciding for further pregnancies.
Introduction
Pregnancy ...and lactation-associated osteoporosis (PAO) is a severe type of premenopausal osteoporosis which predominantly occurs in the last trimester of pregnancy or immediately postpartum. Long-term follow-up data including subsequent fracture risk have yet to be reported.
Methods
This single-center prospective cohort study investigated the subsequent fracture risk of all 107 patients with PAO who were referred to our institution.
Results
Overall, 107 presented with at least one fracture. Each patient sustained on average four fractures most commonly at the thoracolumbar spine. During a median of 6 years of follow-up, 26 (24.3%) of patients who had a fracture at baseline reported a subsequent fracture. Overall, 30 PAO patients (28%) reported a further pregnancy. In subsequent pregnancies, 6 (20%) of patients reported a subsequent fracture. Patients with up to 1 vs. > 1 fracture at time of diagnosis showed a 3 (10%) and 25 (27%) subsequent fracture rate, respectively (
p
= 0.047). There was a significant correlation between the number of fractures at time of diagnosis and subsequent fracture risk (
N
= 26,
p
= 0.56,
p
= 0.003).
Conclusions
Almost a quarter of patients with PAO will sustain a subsequent fracture, and this fracture risk correlates with the number of fractures at time of diagnosis. Patients with PAO need to be informed about their potential subsequent fracture risk before deciding for further pregnancies.
The composition of asteroids and their connection to meteorites provide insight into geologic processes that occurred in the early Solar System. We present spectra of the Nightingale crater region on ...near-Earth asteroid Bennu with a distinct infrared absorption around 3.4 micrometers. Corresponding images of boulders show centimeters-thick, roughly meter-long bright veins. We interpret the veins as being composed of carbonates, similar to those found in aqueously altered carbonaceous chondrite meteorites. If the veins on Bennu are carbonates, fluid flow and hydrothermal deposition on Bennu's parent body would have occurred on kilometer scales for thousands to millions of years. This suggests large-scale, open-system hydrothermal alteration of carbonaceous asteroids in the early Solar System.
We measured the nucleation and growth kinetics of solid silicon (Si) from liquid gold-silicon (AuSi) catalyst particles as the Si supersaturation increased, which is the first step of the ...vapor-liquid-solid growth of nanowires. Quantitative measurements agree well with a kinetic model, providing a unified picture of the growth process. Nucleation is heterogeneous, occurring consistently at the edge of the AuSi droplet, yet it is intrinsic and highly reproducible. We studied the critical supersaturation required for nucleation and found no observable size effects, even for systems down to 12 nanometers in diameter. For applications in nanoscale technology, the reproducibility is essential, heterogeneity promises greater control of nucleation, and the absence of strong size effects simplifies process design.
ABSTRACT
We present Gemini-S and Spitzer-IRAC optical-through-near-IR observations in the field of the SPT2349-56 proto-cluster at z = 4.3. We detect optical/IR counterparts for only 9 of the 14 ...submillimetre galaxies (SMGs) previously identified by ALMA in the core of SPT2349-56. In addition, we detect four z ∼ 4 Lyman-break galaxies (LBGs) in the 30 arcsec-diameter region surrounding this proto-cluster core. Three of the four LBGs are new systems, while one appears to be a counterpart of one of the nine observed SMGs. We identify a candidate brightest cluster galaxy (BCG) with a stellar mass of $(3.2^{+2.3}_{-1.4})\times 10^{11}$ M⊙. The stellar masses of the eight other SMGs place them on, above, and below the main sequence of star formation at z ≈ 4.5. The cumulative stellar mass for the SPT2349-56 core is at least (12.2 ± 2.8) × 1011 M⊙, a sizeable fraction of the stellar mass in local BCGs, and close to the universal baryon fraction (0.19) relative to the virial mass of the core (1013 M⊙). As all 14 of these SMGs are destined to quickly merge, we conclude that the proto-cluster core has already developed a significant stellar mass at this early stage, comparable to z = 1 BCGs. Importantly, we also find that the SPT2349-56 core structure would be difficult to uncover in optical surveys, with none of the ALMA sources being easily identifiable or constrained through g, r, and i colour selection in deep optical surveys and only a modest overdensity of LBGs over the more extended structure. SPT2349-56 therefore represents a truly dust-obscured phase of a massive cluster core under formation.
PDF
