Polymer chains are attached to nanoparticle surfaces for many purposes, including altering solubility, influencing aggregation, dispersion, and even tailoring immune responses in drug delivery. The ...most unique structural motif of polymer-grafted nanoparticles (PGNs) is the high-density region in the corona where polymer chains are stretched under significant confinement, but orientation of these chains has never been measured because conventional nanoscale-resolved measurements lack sensitivity to polymer orientation in amorphous regions. Here, we directly measure local chain orientation in polystyrene grafted gold nanoparticles using polarized resonant soft X-ray scattering (P-RSoXS). Using a computational scattering pattern simulation approach, we measure the thickness of the anisotropic region of the corona and extent of chain orientation within it. These results demonstrate the power of P-RSoXS to discover and quantify orientational aspects of structure in amorphous soft materials and provide a framework for applying this emerging technique to more complex, chemically heterogeneous systems in the future.
High performance, solution processable semiconductors are critical to the realization of low cost, large area electronics. We show that a signature molecular packing motifside-chain ...interdigitationcorrelates to high performance for a large and important class of organic semiconductors. The side chains of recently developed high performance copolymers of poly(alkylthiophenes) can and do interdigitate substantially, whereas they do not in the most common form of the extensively studied, lower performance poly(alkythiophenes). Side-chain interdigitation provides a mechanism for three-dimensional ordering; without it, poly(alkylthiophenes) are limited to small domains and poor performance. We propose the synthetic design rule that three-dimensional ordering is promoted by side-chain attachment densities sufficiently low to permit interdigitation.
Recent demonstration of mobilities in excess of 10 cm2 V–1 s–1 have energized research in solution deposition of polymers for thin film transistor applications. Due to the lamella motif of most ...soluble, semiconducting polymers, the local mobility is intrinsically anisotropic. Therefore, fabrication of aligned films is of interest for optimization of device performance. Many techniques have been developed to control film alignment, including solution deposition via directed flows and deposition on topologically structured substrates. We report device and detailed structural analysis (ultraviolet–visible absorption, IR absorption, near-edge X-ray absorption (NEXAFS), grazing incidence X-ray diffraction, and atomic force microscopy) results from blade coating two high performing semiconducting polymers on unpatterned and nanostructured substrates. Blade coating exhibits two distinct operational regimes: the Landau–Levich or horizontal dip coating regime and the evaporative regime. We find that in the evaporative deposition regime, aligned films are produced on unpatterned substrates with the polymer chain director perpendicular to the coating direction. Both NEXAFS and device measurements indicate the coating induced orientation is nucleated at the air interface. Nanostructured substrates produce anisotropic bottom contact devices with the polymer chain at the buried interface oriented along the direction of the substrate grooves, independent of coating regime and coating direction. Real time studies of film drying establish that alignment occurs at extremely high polymer volume-fraction conditions, suggesting mediation via a lyotropic phase. In all cases the final films appear to exhibit high degrees of crystalline order. The independent control of alignment at the air and substrate interfaces via coating conditions and substrate treatment, respectively, enable detailed assessment of structure–function relationships that suggest the improved performance of the nanostructure aligned films arise from alignment of the less ordered material in the crystallite interphase regions.
Printed 2D materials, derived from solution‐processed inks, offer scalable and cost‐effective routes to mechanically flexible optoelectronics. With micrometer‐scale control and broad processing ...latitude, aerosol‐jet printing (AJP) is of particular interest for all‐printed circuits and systems. Here, AJP is utilized to achieve ultrahigh‐responsivity photodetectors consisting of well‐aligned, percolating networks of semiconducting MoS2 nanosheets and graphene electrodes on flexible polyimide substrates. Ultrathin (≈1.2 nm thick) and high‐aspect‐ratio (≈1 μm lateral size) MoS2 nanosheets are obtained by electrochemical intercalation followed by megasonic atomization during AJP, which not only aerosolizes the inks but also further exfoliates the nanosheets. The incorporation of the high‐boiling‐point solvent terpineol into the MoS2 ink is critical for achieving a highly aligned and flat thin‐film morphology following AJP as confirmed by grazing‐incidence wide‐angle X‐ray scattering and atomic force microscopy. Following AJP, curing is achieved with photonic annealing, which yields quasi‐ohmic contacts and photoactive channels with responsivities exceeding 103 A W−1 that outperform previously reported all‐printed visible‐light photodetectors by over three orders of magnitude. Megasonic exfoliation coupled with properly designed AJP ink formulations enables the superlative optoelectronic properties of ultrathin MoS2 nanosheets to be preserved and exploited for the scalable additive manufacturing of mechanically flexible optoelectronics.
Fully aerosol‐jet printed (AJP) photodetectors are fabricated using megasonically exfoliated MoS2 channels and graphene electrodes. Superlative optoelectronic performance is attributed to the megasonically thinned MoS2 nanosheets, resulting in responsivities that exceed previous all‐printed visible photodetectors by over three orders of magnitude.
The scope of the environmentally benign direct C–H arylation polymerization (DARP) process is validated and significantly extended in the synthesis of a high-performance benzodithiophene-based ...copolymer series, PBDT(Ar)-FTTE, with previously untested and systematically varied heteroaryl (Ar) substituents. Bulk-heterojunction (BHJ) polymer solar cells (PSCs) containing the high-performance nonfullerene acceptor (NFA) ITIC-Th and DARP-derived donors are fabricated and evaluated, yielding PCEs as high as 8%. The relationships between Ar-sensitive copolymer structure, BHJ morphology, and PSC performance are elucidated through in-depth characterization of structural order, phase separation, and charge transport using SCLC, AFM, GIWAXS, R-SoXS, and NEXAFS measurements, which conclusively demonstrate the important effects of Ar-tunable, dimensionally smaller, and well-blended copolymer domains for maximum PSC performance. Smaller BHJ copolymer domains having greater ITIC-Th miscibility definitively correlate with enhanced J SC, FF, and PCE metrics. Surprisingly regarding cell performance durability, while unencapsulated PBDTT-FTTE:ITIC-Th PSCs deliver the highest initial PCE, the unencapsulated PBDTTF-FTTE:ITIC-Th devices exhibit the optimum combination of high initial photovoltaic metrics and stability, retaining nearly 90% of the initial PCE after 51 days in ambient conditions and 83% of initial PCE after 180 min under simulated solar illumination. Importantly, for this PBDT(Ar)-FTTE:ITIC-Th series, PSC photovoltaic stability correlates with the presence of large pure BHJ domains, and moreover rivals or exceeds the stability of the analogous fullerene-based PSCs. Together, these results argue that solar cells prepared with the environmentally benign DARP process and NFAs are promising for both greener and more stable solar energy generation.
The molecular packing in a polymer: fullerene bimolecular crystal is determined using X‐ray diffraction (XRD), molecular mechanics (MM) and molecular dynamics (MD) simulations, 2D solid‐state NMR ...spectroscopy, and IR absorption spectroscopy. The conformation of the electron‐donating polymer is significantly disrupted by the incorporation of the electron‐accepting fullerene molecules, which introduce twists and bends along the polymer backbone and 1D electron‐conducting fullerene channels.
Colloidal quantum dots (CQDs) are promising materials for infrared (IR) light detection due to their tunable bandgap and their solution processing; however, to date, the time response of CQD IR ...photodiodes is inferior to that provided by Si and InGaAs. It is reasoned that the high permittivity of II–VI CQDs leads to slow charge extraction due to screening and capacitance, whereas III–Vs—if their surface chemistry can be mastered—offer a low permittivity and thus increase potential for high‐speed operation. In initial studies, it is found that the covalent character in indium arsenide (InAs) leads to imbalanced charge transport, the result of unpassivated surfaces, and uncontrolled heavy doping. Surface management using amphoteric ligand coordination is reported, and it is found that the approach addresses simultaneously the In and As surface dangling bonds. The new InAs CQD solids combine high mobility (0.04 cm2 V−1 s−1) with a 4× reduction in permittivity compared to PbS CQDs. The resulting photodiodes achieve a response time faster than 2 ns—the fastest photodiode among previously reported CQD photodiodes—combined with an external quantum efficiency (EQE) of 30% at 940 nm.
An amphoteric liganding strategy is developed to simultaneously address In and As dangling bonds on InAs colloidal quantum dot (CQD) surfaces, which provides passivation and charge transport for low‐permittivity CQD solids. The resulting photodiodes achieve a response time faster than 2 ns—the fastest photodiode among previously reported CQD photodiodes—combined with an external quantum efficiency of 30% at 940 nm.
We demonstrate the use of poly(sulfobetaine methacrylate) (PSBMA), and its pyrene-containing copolymer, as solution-processable work function reducers for inverted organic electronic devices. A ...notable feature of PSBMA is its orthogonal solubility relative to solvents typically employed in the processing of organic semiconductors. A strong permanent dipole moment on the sulfobetaine moiety was calculated by density functional theory. PSBMA interlayers reduced the work function of metals, graphene, and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) by over 1 eV, and an ultrathin interlayer of PSBMA reduced the electron injection barrier between indium tin oxide (ITO) and C70 by 0.67 eV. As a result, the performance of organic photovoltaic devices with PSBMA interlayers is significantly improved, and enhanced electron injection is demonstrated in electron-only devices with ITO, PEDOT:PSS, and graphene electrodes. This work makes available a new class of dipole-rich, counterion-free, pH insensitive polymer interlayers with demonstrated effectiveness in inverted devices.
The large-scale manufacture of organic electronics devices becomes more feasible if the molecular orientation and morphology of the semiconductor can be controlled. Here, we report on a previously ...unidentified crystal shape of terraced nanoscale “ribbons” in thin films of poly(2,5-bis(3-alkylthiophen-2-yl)thieno3,2-bthiophene) (pBTTT). The ribbons form after a pBTTT film is heated above its highest temperature phase transition. In contrast to the wide terrace crystal shape previously reported, terraced ribbons have lateral widths of ≈60 nm and lengths greater than 10 μm, with a common orientation between adjacent ribbons. Further, we report a simple and scalable flow coating process that can control the ribbon orientation without requiring special substrates or external fields. The degree of molecular orientation is small after coating but increases dramatically after the terraced ribbons are formed, indicating that an oriented minority templates the whole film structure. The large extent of orientation obtained in these polythiophene crystallites provides potential opportunities to exploit anisotropic electrical properties and to obtain detailed information about the structure of organic semiconductor thin films.
PDF
