Prospective Life Cycle Assessment (pLCA) is useful to evaluate the environmental performance of current and emerging technologies in the future. Yet, as energy systems and industries are rapidly ...shifting towards cleaner means of production, pLCA requires an inventory database that encapsulates the expected changes in technologies and the environment at a given point in time, following specific socio-techno-economic pathways. To this end, this study introduces premise, a tool to streamline the generation of prospective inventory databases for pLCA by integrating scenarios generated by Integrated Assessment Models (IAM). More precisely, premise applies a number of transformations on energy-intensive activities found in the inventory database ecoinvent according to projections provided by the IAM. Unsurprisingly, the study shows that, within a given socio-economic narrative, the climate change mitigation target chosen affects the performance of nearly all activities in the database. This is illustrated by focusing on the effects observed on a few activities, such as systems for direct air capture of CO2, lithium-ion batteries, electricity and clinker production as well as freight transport by road, in relation to the applied sector-based transformation and the chosen climate change mitigation target. This work also discusses the limitations and challenges faced when coupling IAM and LCA databases and what improvements are to be brought in to further facilitate the development of pLCA.
Display omitted
•Prospective LCA can benefit from projections of models such as IAM.•Premise streamlines the production of LCA databases based on prospective scenarios.•Emissions and energy efficiencies of major industries are aligned with IAM scenarios.•Stricter greenhouse gas targets result in larger transformations in the LCA database.•However, such targets result in increased LCA impacts other than global warming.
This composite article is intended to give the experts in the field of cochlear mechanics an opportunity to voice their personal opinion on the one mechanism they believe dominates cochlear ...amplification in mammals. A collection of these ideas are presented here for the auditory community and others interested in the cochlear amplifier. Each expert has given their own personal view on the topic and at the end of their commentary they have suggested several experiments that would be required for the decisive mechanism underlying the cochlear amplifier. These experiments are presently lacking but if successfully performed would have an enormous impact on our understanding of the cochlear amplifier.
The Contribution of Wild Edible Plants to the Mediterranean Diet: An Ethnobotanical Case Study Along the Coast of Campania (Southern Italy).
Wild edible plants, an essential component of people’s ...diets in the Mediterranean basin, are consumed because they have a positive influence on health, supplying the body with microelements, vitamins, phenols, flavonoids, antioxidants, and fiber. In this paper we provide a list of wild plants used in the local cuisine along the coast of Campania, highlighting the medicinal properties of the most widely used species. Fieldwork was conducted from April 2017 to September 2019; in all, 69 informants were interviewed. We carried out an extensive literature review searching both national and international journals for ethnobotanical articles concerning the whole of Italy and especially the region of Campania, published from 1963 to 2019. The relative frequency of citation (RFC) index for each species is provided. Based on the interviews, 85 species and subspecies distributed in 29 families are documented as being used as food. Asteraceae was the most cited family (26.5%) followed by Brassicaceae and Lamiaceae (7.2%). The culinary uses of 11 wild species (13.5% of the total) were hitherto unreported in the ethnobotanical literature for Campania. The present study confirms the persistence of traditional plant use in the region of Campania. Ethnobotanical data, as well as the phytochemical and nutritional profiles of the species in question, offer insights into designing new dishes such as food pairing with other ingredients to improve nutritional and/or sensory quality (e.g., bitterness reduction, flavor enhancement, antioxidant bioavailability).
Purpose:
This paper describes the system for the dose delivery currently used at the Centro Nazionale di Adroterapia Oncologica (CNAO) for ion beam modulated scanning radiotherapy.
Methods:
CNAO ...Foundation, Istituto Nazionale di Fisica Nucleare and University of Torino have designed, built, and commissioned a dose delivery system (DDS) to monitor and guide ion beams accelerated by a dedicated synchrotron and to distribute the dose with a full 3D scanning technique. Protons and carbon ions are provided for a wide range of energies in order to cover a sizable span of treatment depths. The target volume, segmented in several layers orthogonally to the beam direction, is irradiated by thousands of pencil beams which must be steered and held to the prescribed positions until the prescribed number of particles has been delivered. For the CNAO beam lines, these operations are performed by the DDS. The main components of this system are two independent beam monitoring detectors, called BOX1 and BOX2, interfaced with two control systems performing the tasks of real‐time fast and slow control, and connected to the scanning magnets and the beam chopper. As a reaction to any condition leading to a potential hazard, a DDS interlock signal is sent to the patient interlock system which immediately stops the irradiation. The essential tasks and operations performed by the DDS are described following the data flow from the treatment planning system through the end of the treatment delivery.
Results:
The ability of the DDS to guarantee a safe and accurate treatment was validated during the commissioning phase by means of checks of the charge collection efficiency, gain uniformity of the chambers, and 2D dose distribution homogeneity and stability. A high level of reliability and robustness has been proven by three years of system activity needing rarely more than regular maintenance and working with 100% uptime. Four identical and independent DDS devices have been tested showing comparable performances and are presently in use on the CNAO beam lines for clinical activity.
Conclusions:
The dose delivery system described in this paper is one among the few worldwide existing systems to operate ion beam for modulated scanning radiotherapy. At the time of writing, it has been used to treat more than 350 patients and it has proven to guide and control the therapeutic pencil beams reaching performances well above clinical requirements. In particular, in terms of dose accuracy and stability, daily quality assurance measurements have shown dose deviations always lower than the acceptance threshold of 5% and 2.5%, respectively.
In this paper we report on the timing resolution obtained in a beam test with pions of 180 GeV/c momentum at CERN for the first production of 45 μm thick Ultra-Fast Silicon Detectors (UFSD). UFSD are ...based on the Low- Gain Avalanche Detector (LGAD) design, employing n-on-p silicon sensors with internal charge multiplication due to the presence of a thin, low-resistivity diffusion layer below the junction. The UFSD used in this test had a pad area of 1.7 mm2. The gain was measured to vary between 5 and 70 depending on the sensor bias voltage. The experimental setup included three UFSD and a fast trigger consisting of a quartz bar readout by a SiPM. The timing resolution was determined by doing Gaussian fits to the time-of-flight of the particles between one or more UFSD and the trigger counter. For a single UFSD the resolution was measured to be 34 ps for a bias voltage of 200 V, and 27 ps for a bias voltage of 230 V. For the combination of 3 UFSD the timing resolution was 20 ps for a bias voltage of 200 V, and 16 ps for a bias voltage of 230 V.
The aim of this study was to determine the effect of the forage preservation method (silage vs. hay) on volatile compounds and sensory properties of a traditional Caciocavallo cheese during ripening. ...A brown-midrib sudangrass hybrid was cultivated on a 7-ha field and at harvesting it was half ensiled in plastic silo bags and half dried to hay. Forty-four lactating cows were equally allotted into 2 groups fed a isonitrogenous and isoenergetic total mixed ration containing as the sole forage either sorghum hay (H group) or sorghum silage (S group). Milk from the 2 groups was used to produce 3 batches/diet of Caciocavallo ripened for 30, 60, and 90 d. Milk yield and composition as well as cheese chemical and fatty acid composition were not markedly affected by the diet treatment and ripening time. By contrast, ripening induced increased levels of the appearance attribute “yellowness,” along with the “overall flavor,” the odor/flavor attributes “butter” and “hay,” the “salty,” “bitter,” and “umami” tastes, and the texture attribute “oiliness,” whereas the appearance attribute “uniformity” and the texture attribute “elasticity” were reduced. The silage-based diet induced higher perceived intensities of several attributes such as “yellowness”; “overall flavor”; “butter”; “grass” and “hay” odor/flavors; “salty,” “bitter,” and “umami” tastes; and “tenderness” and “oiliness” textures. In S cheese we also observed higher amounts of ketones and fatty acids. Conversely, H cheese showed the terpene α-pinene, which was not detected in S cheese, and a higher intensity of the appearance attribute “uniformity.” These differences allowed the trained panel to discriminate the products, determined an increased consumer liking for 90-d ripened cheese, and tended to increase consumer liking for hay cheese.
Olives are a potential source of natural anti-oxidants; unfortunately, a complete characterization of olive fruit phenolic profile is still to be achieved, as it is characterized by great complexity ...and variability.
In this study, electrospray ionization mass spectrometry (ESI-MS) was used to characterize phenolic extracts from olive fruits, establishing the most suitable conditions of analysis in order to detect phenolic derivatives. This technique proved to be very useful in the identification and in the structure elucidation of olive phenolic compounds. The olive pulp phenolic fraction proved to be dominated by phenolic glucosides, mainly hexose derivatives of phenolic alcohols, flavonoids, secoiridoids and oleosides. Several oleuropein derivatives were detected, proving that they are already present in olive pulp and not, as previously suggested, originated during oil extraction.
With this study an effective method to characterize olive phenolic compounds was offered and it was possible to confirm the presence of several biophenols in olive extracts, thus giving a contribution to the characterization of olive pulp phenolic fraction.
The proof of concept of a new device, capable of determining in a few seconds the energy of clinical proton beams by measuring the time of flight (ToF) of protons, is presented. The prototype ...consists of two thin ultra fast silicon detector (UFSD) pads, aligned along the beam direction in a telescope configuration and readout by a digitizer. The method developed for extracting the energy at the isocenter from the measured ToF, validated by Monte Carlo simulations, and the procedure used to calibrate the system are also presented and discussed in detail. The prototype was tested at the Centro Nazionale di Adroterapia Oncologica (CNAO, Pavia, Italy), at several beam energies, covering the entire clinical range, and using different distances between the sensors. The measured beam energies were benchmarked against the nominal CNAO energy values, obtained during the commissioning of the centre from the measured ranges in water. Deviations of few hundreds of keV have been achieved for all considered proton beam energies for distances between the two sensors larger than 60 cm, indicating a sensitivity to the corresponding beam range in water smaller than the clinical tolerance of 1 mm. Moreover, few seconds of irradiation were necessary to collect the required statistics. These preliminary results indicate that a telescope of UFSDs could achieve in a short time the accuracy required for the clinical application and therefore encourage further investigations towards the improvement and the optimization of the present prototype.
One major rationale for the application of heavy ion beams in tumour therapy is their increased relative biological effectiveness (RBE). The complex dependencies of the RBE on dose, biological ...endpoint, position in the field etc require the use of biophysical models in treatment planning and clinical analysis. This study aims to introduce a new software, named 'Survival', to facilitate the radiobiological computations needed in ion therapy. The simulation toolkit was written in C++ and it was developed with a modular architecture in order to easily incorporate different radiobiological models. The following models were successfully implemented: the local effect model (LEM, version I, II and III) and variants of the microdosimetric-kinetic model (MKM). Different numerical evaluation approaches were also implemented: Monte Carlo (MC) numerical methods and a set of faster analytical approximations. Among the possible applications, the toolkit was used to reproduce the RBE versus LET for different ions (proton, He, C, O, Ne) and different cell lines (CHO, HSG). Intercomparison between different models (LEM and MKM) and computational approaches (MC and fast approximations) were performed. The developed software could represent an important tool for the evaluation of the biological effectiveness of charged particles in ion beam therapy, in particular when coupled with treatment simulations. Its modular architecture facilitates benchmarking and inter-comparison between different models and evaluation approaches. The code is open source (GPL2 license) and available at https://github.com/batuff/Survival.
The ELIMED transport and dosimetry beamline for laser-driven ion beams Romano, F.; Schillaci, F.; Cirrone, G.A.P. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
09/2016, Letnik:
829
Journal Article
Recenzirano
Odprti dostop
A growing interest of the scientific community towards multidisciplinary applications of laser-driven beams has led to the development of several projects aiming to demonstrate the possible use of ...these beams for therapeutic purposes. Nevertheless, laser-accelerated particles differ from the conventional beams typically used for multiscipilinary and medical applications, due to the wide energy spread, the angular divergence and the extremely intense pulses. The peculiarities of optically accelerated beams led to develop new strategies and advanced techniques for transport, diagnostics and dosimetry of the accelerated particles. In this framework, the realization of the ELIMED (ELI-Beamlines MEDical and multidisciplinary applications) beamline, developed by INFN-LNS (Catania, Italy) and that will be installed in 2017 as a part of the ELIMAIA beamline at the ELI-Beamlines (Extreme Light Infrastructure Beamlines) facility in Prague, has the aim to investigate the feasibility of using laser-driven ion beams for multidisciplinary applications. In this contribution, an overview of the beamline along with a detailed description of the main transport elements as well as the detectors composing the final section of the beamline will be presented.
PDF
