Context. The mass-loss process from evolved stars is a key ingredient for our understanding of many fields of astrophysics, including stellar evolution and the chemical enrichment of the interstellar ...medium (ISM) via stellar yields. Nevertheless, many questions are still unsolved, one of which is the geometry of the mass-loss process. Aims. Taking advantage of the results from the Herschel Mass loss of Evolved StarS (MESS) programme, we initiated a coordinated effort to characterise the geometry of mass loss from evolved red giants at various spatial scales. Methods. For this purpose we used the MID-infrared interferometric Instrument (MIDI) to resolve the inner envelope of 14 asymptotic giant branch stars (AGBs) in the MESS sample. In this contribution we present an overview of the interferometric data collected within the frame of our Large Programme, and we also add archive data for completeness. We studied the geometry of the inner atmosphere by comparing the observations with predictions from different geometric models. Results. Asymmetries are detected for the following five stars: R Leo, RT Vir, π1Gruis, omi Ori, and R Crt. All the objects are O-rich or S-type, suggesting that asymmetries in the N band are more common among stars with such chemistry. We speculate that this fact is related to the characteristics of the dust grains. Except for one star, no interferometric variability is detected, i.e. the changes in size of the shells of non-mira stars correspond to changes of the visibility of less than 10%. The observed spectral variability confirms previous findings from the literature. The detection of dust in our sample follows the location of the AGBs in the IRAS colour–colour diagram: more dust is detected around oxygen-rich stars in region II and in the carbon stars in region VII. The SiC dust feature does not appear in the visibility spectrum of the U Ant and S Sct, which are two carbon stars with detached shells. This finding has implications for the theory of SiC dust formation.
Context. It has been shown that convection in red supergiant stars (RSG) gives rise to large granules that cause surface inhomogeneities and shock waves in the photosphere. The resulting motion of ...the photocentre (on time scales ranging from months to years) could possibly have adverse effects on the parallax determination with Gaia. Aims. We explore the impact of the granulation on the photocentric and photometric variability. We quantify these effects in order to better characterise the error that could possibly alter the parallax. Methods. We use 3D radiative-hydrodynamics (RHD) simulations of convection with CO5BOLD and the post-processing radiative transfer code Optim3D to compute intensity maps and spectra in the Gaia G band 325-1030 nm. Results. We provide astrometric and photometric predictions from 3D simulations of RSGs that are used to evaluate the possible degradation of the astrometric parameters of evolved stars derived by Gaia. We show in particular from RHD simulations that a supergiant like Betelgeuse exhibits a photocentric noise characterised by a standard deviation of the order of 0.1 AU. The number of bright giant and supergiant stars whose Gaia parallaxes will be altered by the photocentric noise ranges from a few tens to several thousands, depending on the poorly known relation between the size of the convective cells and the atmospheric pressure scale height of supergiants, and to a lower extent, on the adopted prescription for galactic extinction. In the worst situation, the degradation of the astrometric fit caused by this photocentric noise will be noticeable up to about 5 kpc for the brightest supergiants. Moreover, parallaxes of Betelgeuse-like supergiants are affected by an error of the order of a few percents. We also show that the photocentric noise, as predicted by the 3D simulation, does account for a substantial part of the supplementary "cosmic noise" that affects Hipparcos measurements of Betelgeuse and Antares.
Thanks to their large angular dimension and brightness, red giants and supergiants are privileged targets for optical long-baseline interferometers. 16 red giants and supergiants have been observed ...with the VLTI/AMBER facility over a 2-year period, at medium spectral resolution (
) in the K band. The limb-darkened angular diameters are derived from fits of stellar atmospheric models on the visibility and the triple product data. The angular diameters do not show any significant temporal variation, except for one target: TX Psc, which shows a variation of 4 per cent using visibility data. For the eight targets previously measured by long-baseline interferometry (LBI) in the same spectral range, the difference between our diameters and the literature values is less than 5 per cent, except for TX Psc, which shows a difference of 11 per cent. For the eight other targets, the present angular diameters are the first measured from LBI. Angular diameters are then used to determine several fundamental stellar parameters, and to locate these targets in the Hertzsprung-Russell diagram (HRD). Except for the enigmatic Tc-poor low-mass carbon star W Ori, the location of Tc-rich stars in the HRD matches remarkably well the thermally-pulsating asymptotic giant branch, as it is predicted by the stellar evolution models. For pulsating stars with periods available, we compute the pulsation constant and locate the stars along the various sequences in the period-luminosity diagram. We confirm the increase in mass along the pulsation sequences, as predicted by theory, except for W Ori which, despite being less massive, appears to have a longer period than T Cet along the first-overtone sequence.
Aims. We study the circumstellar environment of the M-type AGB star RT Vir using mid-infrared high spatial resolution observations from the ESO-VLTI focal instrument MIDI. The aim of this study is to ...provide observational constraints on theoretical prediction that the winds of M-type AGB objects can be driven by photon scattering on iron-free silicate grains located in the close environment (about 2 to 3 stellar radii) of the star. Methods. We interpreted spectro-interferometric data, first using wavelength-dependent geometric models. We then used a self-consistent dynamic model atmosphere containing a time-dependent description of grain growth for pure forsterite dust particles to reproduce the photometric, spectrometric, and interferometric measurements of RT Vir. Since the hydrodynamic computation needs stellar parameters as input, a considerable effort was first made to determine these parameters. Results. MIDI differential phases reveal the presence of an asymmetry in the stellar vicinity. Results from the geometrical modeling give us clues to the presence of aluminum and silicate dust in the close circumstellar environment (<5 stellar radii). Comparison between spectro-interferometric data and a self-consistent dust-driven wind model reveals that silicate dust has to be present in the region between 2 to 3 stellar radii to reproduce the 59 and 63 m baseline visibility measurements around 9.8 μm. This gives additional observational evidence in favor of winds driven by photon scattering on iron-free silicate grains located in the close vicinity of an M-type star. However, other sources of opacity are clearly missing to reproduce the 10−13 μm visibility measurements for all baselines. Conclusions. This study is a first attempt to understand the wind mechanism of M-type AGB stars by comparing photometric, spectrometric, and interferometric measurements with state-of-the-art, self-consistent dust-driven wind models. The agreement of the dynamic model atmosphere with interferometric measurements in the 8−10 μm spectral region gives additional observational evidence that the winds of M-type stars can be driven by photon scattering on iron-free silicate grains. Finally, a larger statistical study and progress in advanced self-consistent 3D modeling are still required to solve the remaining problems.
Context. Stellar parameter determination is a challenging task when dealing with galactic giant stars. The combination of different investigation techniques has proven to be a promising approach. ...Aims. We analyse archive spectra obtained with the Short Wavelength Spectrometer (SWS) onboard ISO, and new interferometric observations from the Very Large Telescope MID-infrared Interferometric instrument (VLTI/MIDI) of a very well studied carbon-rich giant: TX Psc. The aim of this work is to determine stellar parameters using spectroscopy and interferometry. Methods. The observations are used to constrain the model atmosphere, and eventually the stellar evolutionary model in the region where the tracks map the beginning of the carbon star sequence. Two different approaches are used to determine stellar parameters: (i) the “classic” interferometric approach where the effective temperature is fixed by using the angular diameter in the N-band (from interferometry) and the apparent bolometric magnitude; (ii) parameters are obtained by fitting a grid of state-of-the-art hydrostatic models to spectroscopic and interferometric observations. Results. We find good agreement between the parameters of the two methods. The effective temperature and luminosity clearly place TX Psc in the carbon-rich AGB star domain in the H-R-diagram. Current evolutionary tracks suggest that TX Psc became a C-star just recently, which means that the star is still in a “quiet” phase compared to the subsequent strong-wind regime. This agrees with the C/O ratio being only slightly greater than one.
Context. SV Psc is an asymptotic giant branch (AGB) star surrounded by an oxygen-rich dust envelope. The mm-CO line profile of the object’s outflow shows a clear double-component structure. Because ...of the high angular resolution, mid-IR interferometry may give strong constraints on the origin of this composite profile. Aims. The aim of this work is to investigate the morphology of the environment around SV Psc using high-angular resolution interferometry observations in the mid-IR with the Very Large Telescope MID-infrared Interferometric instrument (VLTI/MIDI). Methods. Interferometric data in the N-band taken at different baseline lengths (ranging from 32–64 m) and position angles (73–142°) allow a study of the morphology of the circumstellar environment close to the star. The data are interpreted on the basis of 2-dimensional, chromatic geometrical models using the fitting software tool GEM-FIND developed for this purpose. Results. The results favor two scenarios: (i) the presence of a highly inclined, optically thin, dusty disk surrounding the central star; (ii) the presence of an unresolved binary companion at a separation of 13.7+4.2-4.8 AU and a position angle of 121.8°+15.4°-24.5° NE. The derived orbital period of the binary is 38.1+20.4-22.6 yr. This detection is in good agreement with hydrodynamic simulations showing that a close companion could be responsible for the entrainment of the gas and dust into a circumbinary structure.
Aims. We present a study of the envelope morphology of the carbon Mira R For with VLTI/MIDI. This object is one of the few asymptotic giant branch (AGB) stars that underwent a dust-obscuration event. ...The cause of such events is still a matter of discussion. Several symmetric and asymmetric scenarios have been suggested in the literature. Methods. Mid-infrared interferometric observations were obtained separated by two years. The observations probe different depths of the atmosphere and cover different pulsation phases. The visibilities and the differential phases were interpreted using GEM-FIND, a tool for fitting spectrally dispersed interferometric observations with the help of wavelength-dependent geometric models. Results. We report the detection of an asymmetric structure revealed through the MIDI differential phase. This asymmetry is observed at the same baseline and position angle two years later. The observations are best simulated with a model that includes a uniform-disc plus a Gaussian envelope plus a point-source. The geometric model can reproduce both the visibilities and the differential phase signatures. Conclusions. Our MIDI data favour explanations of the R For obscuration event that are based on an asymmetric geometry. We clearly detect a photocentre shift between the star and the strongly resolved dust component. This might be caused by a dust clump or a substellar companion. However, the available observations do not allow us to distinguish between the two options. The finding has strong implications for future studies of the geometry of the envelope of AGB stars: if this is a binary, are all AGB stars that show an obscuration event binaries as well? Or are we looking at asymmetric mass-loss processes (i.e. dusty clumps) in the inner part of a carbon-rich Mira?
Context. We study the circumstellar environment of the carbon-rich star R Sculptoris using the near- and mid-infrared high spatial resolution observations from the ESO-VLTI focal instruments VINCI ...and MIDI, respectively. Aims. These observations aim at increasing our knowledge of the dynamic processes in play within the very close circumstellar environment where the mass loss of AGB stars is initiated. Methods. We first compare the spectro-interferometric measurements of the star at different epochs to detect the dynamic signatures of the circumstellar structures at different spatial and spectral scales. We then interpret these data using a self-consistent dynamic model atmosphere to discuss the dynamic picture deduced from the observations. Since the hydrodynamic computation needs stellar parameters as input, a considerable effort is first applied to determining these parameters. Results. Interferometric observations do not show any significant variability effect at the 16 m baseline between phases 0.17 and 0.23 in the K band, and for both the 15 m baseline between phases 0.66 and 0.97 and the 31 m baseline between phases 0.90 and 0.97 in the N band. We find fairly good agreement between the dynamic model and the spectrophotometric data from 0.4 to 25 μm. The model agrees well with the time-dependent flux data at 8.5 μm, whereas it is too faint at 11.3 and 12.5 μm. The VINCI visibility measurements are reproduced well, meaning that the extension of the model is suitable in the K-band. In the mid-infrared, the model has the proper extension to reveal molecular structures of C2H2 and HCN located above the stellar photosphere. However, the windless model used is not able to reproduce the more extended and dense dusty environment. Conclusions. Among the different explanations for the discrepancy between the model and the measurements, the strong nonequilibrium process of dust formation is one of the most probable. The transition from windless atmospheres to models with considerable mass-loss rates occurs in a very narrow range of stellar parameters, especially for the effective temperature, the C/O ratio, and the pulsation amplitude. A denser sampling of such critical regions of the parameter space with additional models might lead to a better representation of the extended structures of low mass-loss carbon stars like R Sculptoris. The complete dynamic coupling of gas and dust and the approximation of grain opacities with the small-particle limit in the dynamic calculation could also contribute to the difference between the model and the data.
We report on the testing of the centrosymmetry parameter (CSP), an indicator of deviation from centrosymmetry of a source brightness distribution. This indicator is derived from the spectral ...distribution of the triple product measured over three baselines of an optical interferometer. Numerical simulations using parametric toy-models (separated or transiting binary, one-spot model), generated with the spidast software, are applied to the VLTI /AMBER facility in the K band (2.2 μm). The simulations show that, in case of centrosymmetry, the CSP parameter is in agreement with the usual phase of the spectral mean of the triple product (called GCP, global closure phase). To justify the preferential use of CSP rather than GCP, we show situations with asymmetric geometries for which GCP diagnoses centrosymmetry, while CSP does not. Using realistic Roche lobe-filling binary and hydrodynamic convective models, we show that CSP can also be used as an indicator for geometric similarity between physical and toy-models. Thus, dealing with real data, the toy-model parameters can be fitted on the measured CSP values, in order to assess the input-parameter values of the most suitable complex physical model that will be used to interpret the data.
Context. Accurate long-baseline interferometric measurements require careful calibration with reference stars. Small calibrators with high angular diameter accuracy ensure the true visibility ...uncertainty to be dominated by the measurement errors. Aims. We review some indirect methods for estimating angular diameter, using various types of input data. Each diameter estimate, obtained for the test-case calibrator star λ Gru, is compared with the value 2.71 mas found in the Bordé calibrator catalogue published in 2002. Methods. Angular size estimations from spectral type, spectral index, in-band magnitude, broadband photometry, and spectrophotometry give close estimates of the angular diameter, with slightly variable uncertainties. Fits on photometry and spectrophotometry need physical atmosphere models with “plausible” stellar parameters. Angular diameter uncertainties were estimated by means of residual bootstrapping confidence intervals. All numerical results and graphical outputs presented in this paper were obtained using the routines developed under PV-WAVE®, which compose the modular software suite SPIDAST, created to calibrate and interprete spectroscopic and interferometric measurements, particularly those obtained with VLTI-AMBER. Results. The final angular diameter estimate 2.70 mas of λ Gru, with 68% confidence interval 2.65–2.81 mas, is obtained by fit of the MARCS model on the ISO-SWS 2.38–27.5 μm spectrum, with the stellar parameters Te = 4250 K, log g = 2.0, z = 0.0 dex, $\mathcal{M}$ = 1.0 $\mathcal{M}_{\odot}$, and $\xi_{\rm t}$ = 2.0 km s-1.
PDF
