Selectivity remains a challenge for ATP-mimetic kinase inhibitors, an issue that may be overcome by targeting unique residues or binding pockets. However, to date only few strategies have been ...developed. Here we identify that bulky residues located N-terminal to the DFG motif (DFG-1) represent an opportunity for designing highly selective inhibitors with unexpected binding modes. We demonstrate that several diverse inhibitors exerted selective, noncanonical binding modes that exclusively target large hydrophobic DFG-1 residues present in many kinases including PIM, CK1, DAPK, and CLK. By use of the CLK family as a model, structural and biochemical data revealed that the DFG-1 valine controlled a noncanonical binding mode in CLK1, providing a rationale for selectivity over the closely related CLK3 which harbors a smaller DFG-1 alanine. Our data suggest that targeting the restricted back pocket in the small fraction of kinases that harbor bulky DFG-1 residues offers a versatile selectivity filter for inhibitor design.
Two metal–organic framework materials, MFM-130 and MFM-131 (MFM = Manchester Framework Material), have been synthesized using two oligoparaxylene (OPX) tetracarboxylate linkers containing four and ...five aromatic rings, respectively. Both fof-type non-interpenetrated networks contain Kagomé lattice layers comprising Cu2(COO)4 paddlewheel units and isophthalates, which are pillared by the OPX linkers. Desolvated MFM-130, MFM-130a, shows permanent porosity (BET surface area of 2173 m2/g, pore volume of 1.0 cm3/g), high H2 storage capacity at 77 K (5.3 wt% at 20 bar and 2.2 wt% at 1 bar), and a higher CH4 adsorption uptake (163 cm3(STP)/cm3 (35 bar and 298 K)) compared with its structural analogue, NOTT-103. MFM-130a also shows impressive selective adsorption of C2H2, C2H4, and C2H6 over CH4 at room temperature, indicating its potential for separation of C2 hydrocarbons from CH4. The single-crystal structure of MFM-131 confirms that the methyl substituents of the paraxylene units block the windows in the Kagomé lattice layer of the framework, effectively inhibiting network interpenetration in MFM-131. This situation is to be contrasted with that of the doubly interpenetrated oligophenylene analogue, NOTT-104. Calculation of the mechanical properties of these two MOFs confirms and explains the instability of MFM-131 upon desolvation in contrast to the behavior of MFM-130. The incorporation of paraxylene units, therefore, provides an efficient method for preventing network interpenetration as well as accessing new functional materials with modified and selective sorption properties for gas substrates.
Thailand established herself as an automobile production and export hub, partly due to industrial policy. Targeting a particular vehicle type has successfully promoted specialisation of production ...and exports of pickup trucks. Past success led policymakers to continue the use of this so-called production champion policy to diversify automobile production in Thailand. Analysis of subsequent generations of product champion policy show that policy was successful in terms of promoting Thailand as a production and export location but failed to establish a dominant product champion akin to pickup trucks.
Natural gas (methane, CH4) is widely considered as a promising energy carrier for mobile applications. Maximizing the storage capacity is the primary goal for the design of future storage media. Here ...we report the CH4 storage properties in a family of isostructural (3,24)-connected porous materials, MFM-112a, MFM-115a, and MFM-132a, with different linker backbone functionalization. Both MFM-112a and MFM-115a show excellent CH4 uptakes of 236 and 256 cm3 (STP) cm–3 (v/v) at 80 bar and room temperature, respectively. Significantly, MFM-115a displays an exceptionally high deliverable CH4 capacity of 208 v/v between 5 and 80 bar at room temperature, making it among the best performing metal–organic frameworks for CH4 storage. We also synthesized the partially deuterated versions of the above materials and applied solid-state 2H NMR spectroscopy to show that these three frameworks contain molecular rotors that exhibit motion in fast, medium, and slow regimes, respectively. In situ neutron powder diffraction studies on the binding sites for CD4 within MFM-132a and MFM-115a reveal that the primary binding site is located within the small pocket enclosed by the (Cu2)3(isophthalate)3 window and three anthracene/phenyl panels. The open Cu(II) sites are the secondary/tertiary adsorption sites in these structures. Thus, we obtained direct experimental evidence showing that a tight cavity can generate a stronger binding affinity to gas molecules than open metal sites. Solid-state 2H NMR spectroscopy and neutron diffraction studies reveal that it is the combination of optimal molecular dynamics, pore geometry and size, and favorable binding sites that leads to the exceptional and different methane uptakes in these materials.
A series of isostructural metal−organic framework polymers of composition Cu2(L)(H2O)2 (L= tetracarboxylate ligands), denoted NOTT-nnn, has been synthesized and characterized. Single crystal X-ray ...structures confirm the complexes to contain binuclear Cu(II) paddlewheel nodes each bridged by four carboxylate centers to give a NbO-type network of 64·82 topology. These complexes are activated by solvent exchange with acetone coupled to heating cycles under vacuum to afford the desolvated porous materials NOTT-100 to NOTT-109. These incorporate a vacant coordination site at each Cu(II) center and have large pore volumes that contribute to the observed high H2 adsorption. Indeed, NOTT-103 at 77 K and 60 bar shows a very high total H2 adsorption of 77.8 mg g−1 equivalent to 7.78 wt% wt% = (weight of adsorbed H2)/(weight of host material) or 7.22 wt% wt% = 100(weight of adsorbed H2)/(weight of host material + weight of adsorbed H2). Neutron powder diffraction studies on NOTT-101 reveal three adsorption sites for this material: at the exposed Cu(II) coordination site, at the pocket formed by three {Cu2} paddle wheels, and at the cusp of three phenyl rings. Systematic virial analysis of the H2 isotherms suggests that the H2 binding energies at these sites are very similar and the differences are smaller than 1.0 kJ mol−1, although the adsorption enthalpies for H2 at the exposed Cu(II) site are significantly affected by pore metrics. Introducing methyl groups or using kinked ligands to create smaller pores can enhance the isosteric heat of adsorption and improve H2 adsorption. However, although increasing the overlap of potential energy fields of pore walls increases the heat of H2 adsorption at low pressure, it may be detrimental to the overall adsorption capacity by reducing the pore volume.
Gelatinous zooplankton hold key functions in the ocean and have been shown to significantly influence the transport of organic carbon to the deep sea. We discovered a gelatinous, flux-feeding ...polychaete of the genus Poeobius in very high abundances in a mesoscale eddy in the tropical Atlantic Ocean, where it cooccurred with extremely low particle concentrations. Subsequent analysis of an extensive in situ imaging dataset revealed that Poeobius sp. occurred sporadically between 5°S–20°N and 16°W–46°W in the upper 1000 m. Abundances were significantly elevated and the depth distribution compressed in anticyclonic modewater eddies (ACMEs). In two ACMEs, high Poeobius sp. abundances were associated with strongly reduced particle concentrations and fluxes in the layers directly below the polychaete. We discuss possible reasons for the elevated abundances of Poeobius sp. in ACMEs and provide estimations showing that a single zooplankton species can completely intercept the downward particle flux by feeding with their mucous nets, thereby substantially altering the biogeochemical setting within the eddy.
Nitrogen dioxide (NO2) is a toxic air pollutant, and efficient abatement technologies are important to mitigate the many associated health and environmental problems. Here, we report the reactive ...adsorption of NO2 in a redox−active metal–organic framework (MOF), MFM-300(V). Adsorption of NO2 induces the oxidation of V(III) to V(IV) centers in MFM-300(V), and this is accompanied by the reduction of adsorbed NO2 to NO and the release of water via deprotonation of the framework hydroxyl groups, as confirmed by synchrotron X-ray diffraction and various experimental techniques. The efficient packing of {NO2·N2O4}∞ chains in the pores of MFM-300(VIV) results in a high isothermal NO2 uptake of 13.0 mmol g–1 at 298 K and 1.0 bar and is retained for multiple adsorption–desorption cycles. This work will inspire the design of redox-active sorbents that exhibit reductive adsorption of NO2 for the elimination of air pollutants.
The purification of light olefins is one of the most important chemical separations globally and consumes large amounts of energy. Porous materials have the capability to improve the efficiency of ...this process by acting as solid, regenerable adsorbents. However, to develop translational systems, the underlying mechanisms of adsorption in porous materials must be fully understood. Herein, we report the adsorption and dynamic separation of C2 and C3 hydrocarbons in the metal–organic framework MFM-300(In), which exhibits excellent performance in the separation of mixtures of ethane/ethylene and propyne/propylene. Unusually selective adsorption of ethane over ethylene at low pressure is observed, resulting in selective retention of ethane from a mixture of ethylene/ethane, thus demonstrating its potential for a one-step purification of ethylene (purity > 99.9%). In situ neutron powder diffraction and inelastic neutron scattering reveal the preferred adsorption domains and host–guest binding dynamics of adsorption of C2 and C3 hydrocarbons in MFM-300(In).
This paper elucidates Indonesia's resource-cum-industrial policy to leverage domestic nickel resources for building a localised value chain from mining to electric vehicles. The value chain is first ...mapped in order to facilitate the policy analysis. While Indonesia is successful in attracting investment projects which aim to build the value chain from mining to electric vehicle batteries within her borders, our analysis nevertheless finds that this process must be rather attributed to value chain lead firm strategy than Indonesian resource policy. Further, the final stage of electric vehicle assembly is only sparsely developed, suggesting that the attempted integration of forward linkage creation from mining and simultaneous backward linkage creation from vehicle assembly is not systematically deployed.
This paper uses the German Socio-Economic Panel to show that fathers – and to a lesser degree childless men and women, are most satisfied with life when working full-time or longer. In contrast, ...whether mothers spend more or less hours in employment hardly affects their life satisfaction. The rational maximization of income as postulated by family economics cannot explain these results, as they are even found in households where women earn more than men. Because they are also found among those who hold secure jobs and have very little household work and childcare duties, these results contradict the predictions by expansionist role theory that men and women are better off in egalitarian employment arrangements. The results change little over time, with cohorts or with educational group-membership. For men, the results therefore fit best with the predictions of traditional role theory, which suggests that people are most satisfied when adhering to stereotypical gender roles.
PDF
