Obtaining a burning plasma is a critical step towards self-sustaining fusion energy
. A burning plasma is one in which the fusion reactions themselves are the primary source of heating in the plasma, ...which is necessary to sustain and propagate the burn, enabling high energy gain. After decades of fusion research, here we achieve a burning-plasma state in the laboratory. These experiments were conducted at the US National Ignition Facility, a laser facility delivering up to 1.9 megajoules of energy in pulses with peak powers up to 500 terawatts. We use the lasers to generate X-rays in a radiation cavity to indirectly drive a fuel-containing capsule via the X-ray ablation pressure, which results in the implosion process compressing and heating the fuel via mechanical work. The burning-plasma state was created using a strategy to increase the spatial scale of the capsule
through two different implosion concepts
. These experiments show fusion self-heating in excess of the mechanical work injected into the implosions, satisfying several burning-plasma metrics
. Additionally, we describe a subset of experiments that appear to have crossed the static self-heating boundary, where fusion heating surpasses the energy losses from radiation and conduction. These results provide an opportunity to study α-particle-dominated plasmas and burning-plasma physics in the laboratory.
Abstract
In a burning plasma state
1–7
, alpha particles from deuterium–tritium fusion reactions redeposit their energy and are the dominant source of heating. This state has recently been achieved ...at the US National Ignition Facility
8
using indirect-drive inertial-confinement fusion. Our experiments use a laser-generated radiation-filled cavity (a hohlraum) to spherically implode capsules containing deuterium and tritium fuel in a central hot spot where the fusion reactions occur. We have developed more efficient hohlraums to implode larger fusion targets compared with previous experiments
9,10
. This delivered more energy to the hot spot, whereas other parameters were optimized to maintain the high pressures required for inertial-confinement fusion. We also report improvements in implosion symmetry control by moving energy between the laser beams
11–16
and designing advanced hohlraum geometry
17
that allows for these larger implosions to be driven at the present laser energy and power capability of the National Ignition Facility. These design changes resulted in fusion powers of 1.5 petawatts, greater than the input power of the laser, and 170 kJ of fusion energy
18,19
. Radiation hydrodynamics simulations
20,21
show energy deposition by alpha particles as the dominant term in the hot-spot energy balance, indicative of a burning plasma state.
Inertial confinement fusion implosions must achieve high in-flight shell velocity, sufficient energy coupling between the hot spot and imploding shell, and high areal density (ρR=∫ρdr) at stagnation. ...Asymmetries in ρR degrade the coupling of shell kinetic energy to the hot spot and reduce the confinement of that energy. We present the first evidence that nonuniformity in the ablator shell thickness (∼0.5% of the total thickness) in high-density carbon experiments is a significant cause for observed 3D ρR asymmetries at the National Ignition Facility. These shell-thickness nonuniformities have significantly impacted some recent experiments leading to ρR asymmetries on the order of ∼25% of the average ρR and hot spot velocities of ∼100 km/s. This work reveals the origin of a significant implosion performance degradation in ignition experiments and places stringent new requirements on capsule thickness metrology and symmetry.
Indirect Drive Inertial Confinement Fusion Experiments on the National Ignition Facility (NIF) have achieved a burning plasma state with neutron yields exceeding 170 kJ, roughly 3 times the prior ...record and a necessary stage for igniting plasmas. The results are achieved despite multiple sources of degradations that lead to high variability in performance. Results shown here, for the first time, include an empirical correction factor for mode-2 asymmetry in the burning plasma regime in addition to previously determined corrections for radiative mix and mode-1. Analysis shows that including these three corrections alone accounts for the measured fusion performance variability in the two highest performing experimental campaigns on the NIF to within error. Here we quantify the performance sensitivity to mode-2 symmetry in the burning plasma regime and apply the results, in the form of an empirical correction to a 1D performance model. Furthermore, we find the sensitivity to mode-2 determined through a series of integrated 2D radiation hydrodynamic simulations to be consistent with the experimentally determined sensitivity only when including alpha-heating.
The dynamics of laser-produced plasma (LPP) and its shockwave-induced density jump (SIDJ) were investigated in low-pressure ambient air during the laser pulse using an optical interferometer. A tiny ...SIDJ could be observed clearly in ambient air with pressure as low as 3 Torr even during the rising edge of a 7 ns laser pulse. It was shown that the density jump and ionization could seed laser-induced ambient air breakdown at a relatively low pressure, which could significantly reduce laser energy deposited in the LPP. The ionization of the density jump was confirmed by dynamic emission imaging.
We explored the radiation hydrodynamics of tin microsphere targets exposed to 1-μm, 8-ns laser pulses, and compared them with thick planar targets. Previous research 1 has shown that the conversion ...efficiency of laser light to in-band emissions around 13.5 nm is lower in microsphere targets. Our work was designed to elucidate the reasons for this drop in emission. Differences in plasma expansion, laser absorption and atomic emissions were measured in the UCSD Laser Plasma Laboratory and modeled using the 2D radiation hydrodynamic code h2d. Experimental data are compared with modeling and differences between emissions in planar and spherical targets explained.
CH capsules, produced through glow discharge plasma coating, routinely suffer from surface defects including domes with gradually sloping sides and dust particles with sharp edges. Surface defects ...seed instabilities during implosion experiments on the National Ignition Facility and lead to radial jets, which increase mixing at the center of the implosion hindering the shell compression. Avoiding such defects requires characterizing the entire shell surface. In addition, the global position of the defects must be recorded in order to coordinate shot results with the initial surface perturbations. Further work was done to enable side-by-side comparison with optically acquired images to aid in capsule surface inspection throughout the capsule production process.
PDF
