Performance of the CMS RPC upgrade using 2D fast timing readout system Shchablo, K.; Laktineh, I.; Gouzevitch, M. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
04/2020, Letnik:
958
Journal Article
Recenzirano
Odprti dostop
We present a new generation of Resistive Plate Chambers (RPC) that are able to withstand high particle fluxes (up to 2 kHz cm−2). These chambers will be instrumented with a precise timing readout ...electronics and they are proposed to equip two of the four high eta stations of the CMS muon system.
Two-gap RPC detectors, with each gap made of two 1.4 mm High Pressure Laminate (HPL) electrodes and separated by a gas gap of the same thickness, are proposed. The new scheme reduces the amount of the avalanche charge produced by the passage of a charged particle through the detector. This improves the RPC rate capability by reducing the needed time to absorb this charge. To keep the RPC efficiency high a sensitive, low-noise and high time resolution Front-End Electronics Board (FEB) is needed to cope with the low charge signal. An ASIC called PETIROC that has all these characteristics is proposed to read out the new chambers.
A thin (0.6 mm) Printed Circuit Board (PCB), 165 cm long, equipped with pickup strips of average pitch of 0.75 cm is inserted between the two RPC gaps. The strips are read out from both ends and the arrival time difference of the two signals is used to determine the particle position along the strip (η position). The absolute time measurement will also be used to reduce the data ambiguity due to the expected high pileup at the High-Luminosity phase of the Large Hadron Collider (HL-LHC).
CMS iRPC FEB development and validation Gouzevitch, M.; El Sawy, M.; Alves, G.A. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
07/2024, Letnik:
1064
Journal Article
Recenzirano
Odprti dostop
In view of the High Luminosity upgrade of the CERN LHC, the forward CMS Muon spectrometer will be extended with two new stations of improved Resistive Plate Chambers (iRPC) covering the ...pseudorapidity range from 1.8 to 2.4. Compared to the present RPC system, the gap thickness is reduced to lower the avalanche charge, and an innovative 2D strip readout geometry is proposed. These improvements will allow iRPC detector to cope with higher background rates. A new Front-End-Board (FEB) is designed to readout iRPC signals with a threshold as low as 30fC and an integrated Time Digital Converter with a resolution of 30ps. In addition, the communication bandwidth is significantly increased by using optical fibers. The history, final design, certification, and calibration of this FEB are presented.
Improved resistive plate chambers for HL-LHC upgrade of CMS Samalan, A.; Thiel, M.; Asilar, E. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
03/2024, Letnik:
1060, Številka:
C
Journal Article
Pressure correction study for the CMS iRPC detector Abdelhameid, T.; Gouzevitch, M.; Tytgat, M. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
02/2024, Letnik:
1059, Številka:
C
Journal Article
Machine Learning based tool for CMS RPC currents quality monitoring Shumka, E.; El Sawy, M.; Alves, G.A. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
09/2023, Letnik:
1054, Številka:
C
Journal Article
Recenzirano
Odprti dostop
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the ...CMS underground cavern on the Large Hadron Collider where pp luminosities of up to 2×1034cm−2s−1 are routinely achieved. The CMS RPC system performance is constantly monitored and the detector is regularly maintained to ensure stable operation. The main monitorable characteristics are dark current, efficiency for muon detection, noise rate etc. Herein we describe an automated tool for CMS RPC current monitoring which uses Machine Learning techniques. We further elaborate on the dedicated generalized linear model proposed already and add autoencoder models for self-consistent predictions as well as hybrid models to allow for RPC current predictions in a distant future.
Aging studies for the CMS improved Resistive Plate Chambers Filho, M. Barroso Ferreira; Tytgat, M.; El Sawy, M. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
10/2023, Letnik:
1055
Journal Article
Recenzirano
For the High Luminosity (HL-LHC) upgrade an upgrade of the CMS detector is foreseen. One of the main projects is the development of the improved Resistive Plate Chamber (iRPC) detectors that will be ...installed in the forward region of CMS. To validate the performance of the new detector gaps with HL-LHC radiation levels, experimental tests have been conducted at the CERN Gamma Irradiation Facility (GIF++). One chamber equipped with electronics is studied and its parameters are monitored as a function of the accumulated charge.
The present Compact Muon Solenoid Resistive Plate Chambers system has been worked efficiently during Run I and Run II of data taking period (Shah et al., 2020) 1. In the coming years of operation ...with the High Luminosity LHC (HL-LHC), the expected rate and integrated charge are expected to be about 600 Hz/cm2 and 840 mC/cm2, respectively (including a safety factor of three). Therefore, the HL-LHC phase will be a challenge for the RPC system since the expected operating conditions are much harsher than those for which the detectors have been designed, and could introduce non-recoverable aging effects which can alter the detector properties. A longevity test has been started at the CERN Gamma Irradiation Facility to estimate the impact of HL-LHC conditions on the RPC detector performance in order to determine whether the RPC system will survive the harsher background conditions expected at HL-LHC. The latest results of the irradiation test will be presented.
RPC background studies at CMS experiment Carnevali, F.; Samalan, A.; Tytgat, M. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
07/2023, Letnik:
1052
Journal Article
Recenzirano
Odprti dostop
During Run2 the high instantaneous luminosity, up to 2.21034cm−2s−1, lead to a substantial hit rate in the Compact Muon Solenoid experiment’s muon chambers due to multiple background sources to ...physics processes sought for at LHC. In this article we will describe the analysis method devised to measure and identify the contributions to such background in the Resistive Plate Chambers. Thorough understanding of the background rates provides the base for the upgrade of the muon detectors for the High-Luminosity LHC.
The CMS RPC system readiness for LHC Run-3 data taking Shopova, M.; Samalan, A.; Tytgat, M. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
07/2023, Letnik:
1052
Journal Article
Recenzirano
Odprti dostop
During Run-3, the LHC is preparing to deliver instantaneous luminosity in the range from 5 × 1034 cm−2 s−1 to 7.5 × 1034 cm−2 s−1. To ensure stable data taking, providing redundant information for ...robust muon triggering, reconstruction and identification, the CMS RPC collaboration has used the opportunity given by the LHC long shutdown 2 (LS2), to perform a series of maintenance and preparation activities for the new data taking period. The overall performance of the RPC system after the LS2 commissioning period and the activities in preparation for future data taking will be presented.
New slow control emulator for the CMS phase-2 upgrade RPC link system Boghrati, B.; El Sawy, M.; Alves, G.A. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
07/2023, Letnik:
1052
Journal Article
Recenzirano
Odprti dostop
The CERN Compact Muon Solenoid (CMS) RPC system phase-2 upgrade project is in good progress. It covers the replacement of the off-detector electronics for the present Resistive Plate Chambers (RPC), ...known as “link system”, and includes the renovation of the legacy slow controller with brand new electronics, called RPC backend electronics. The scope of the new backend is to handle all requirements of the new RPC link system such as assigning a dedicated link to every control board (CB) that carries out the slow control and fast trigger commands and Large Hadron Collider (LHC) clock. In this work, we will review the architecture of the new Slow controller, its firmware, and the commands supported by this system.
