The usability and tunability of the essential InP-InGaAs material combination in nanowire-based quantum wells (QWs) are assessed. The wurtzite phase core-multi-shell InP-InGaAs-InP nanowire QWs are ...characterised using cross-section transmission electron microscopy and photoluminescence measurements. The InP-InGaAs direct interface is found to be sharp while the InGaAs-InP inverted interface is more diffused, in agreement with their planar counterpart. Bright emission is observed from the single nanowires containing the QWs at room temperature, with no emission from the InP core or outer barrier. The tunability of the QW emission wavelength in the 1.3-1.55 μm communication wavelength range is demonstrated by varying the QW thickness and in the 1.3 μm range by varying the composition. The experiments are supported by simulation of the emission wavelength of the wurtzite phase InP-InGaAs QWs in the thickness range considered. The radial heterostructure is further extended to design multiple QWs with bright emission, therefore establishing the capability of this material system for nanowire based optical devices for communication applications.
We present results on the electroexcitation of the low mass resonances {delta}(1232)P{sub 33}, N(1440)P{sub 11}, N(1520)D{sub 13}, and N(1535)S{sub 11} in a wide range of Q{sup 2}. The results were ...obtained in the comprehensive analysis of data from the Continuous Electron Beam Accelerator Facility (CEBAF) large acceptance spectrometer (CLAS) detector at the Thomas Jefferson National Accelerator Facility (JLab) on differential cross sections, longitudinally polarized beam asymmetries, and longitudinal target and beam-target asymmetries for {pi} electroproduction off the proton. The data were analyzed using two conceptually different approaches--fixed-t dispersion relations and a unitary isobar model--allowing us to draw conclusions on the model sensitivity of the obtained electrocoupling amplitudes. The amplitudes for the {delta}(1232)P{sub 33} show the importance of a meson-cloud contribution to quantitatively explain the magnetic dipole strength, as well as the electric and scalar quadrupole transitions. They do not show any tendency of approaching the pQCD regime for Q{sup 2}{<=}6 GeV{sup 2}. For the Roper resonance, N(1440)P{sub 11}, the data provide strong evidence that this state is a predominantly radial excitation of a three-quark (3q) ground state. Measured in pion electroproduction, the transverse helicity amplitude for the N(1535)S{sub 11} allowed us to obtain the branching ratios of this state to the {pi}N and {eta}N channels via comparison with the results extracted from {eta} electroproduction. The extensive CLAS data also enabled the extraction of the {gamma}*p{yields}N(1520)D{sub 13} and N(1535)S{sub 11} longitudinal helicity amplitudes with good precision. For the N(1535)S{sub 11}, these results became a challenge for quark models and may be indicative of large meson-cloud contributions or of representations of this state that differ from a 3q excitation. The transverse amplitudes for the N(1520)D{sub 13} clearly show the rapid changeover from helicity-3/2 dominance at the real photon point to helicity-1/2 dominance at Q{sup 2}>1 GeV{sup 2}, confirming a long-standing prediction of the constituent quark model.
The usability and tunability of the essential InP-InGaAs material combination in nanowire-based quantum wells (QWs) are assessed. The wurtzite phase core-multi-shell InP-InGaAs-InP nanowire QWs are ...characterised using cross-section transmission electron microscopy and photoluminescence measurements. The InP-InGaAs direct interface is found to be sharp while the InGaAs-InP inverted interface is more diffused, in agreement with their planar counterpart. Bright emission is observed from the single nanowires containing the QWs at room temperature, with no emission from the InP core or outer barrier. The tunability of the QW emission wavelength in the 1.3-1.55 μm communication wavelength range is demonstrated by varying the QW thickness and in the 1.3 μm range by varying the composition. The experiments are supported by simulation of the emission wavelength of the wurtzite phase InP-InGaAs QWs in the thickness range considered. The radial heterostructure is further extended to design multiple QWs with bright emission, therefore establishing the capability of this material system for nanowire based optical devices for communication applications.
The knowledge of the value and anisotropy of the gyromagnetic factor in semiconducting nanowires (NWs) is crucial for their potential applications in several fields, such as spintronics and ...topological quantum computation. Here, we present a complete experimental and theoretical investigation of the Zeeman splitting of the fundamental exciton transition in an important material system: wurtzite (WZ) InP NWs. The excitonic g factors are derived by the Zeeman splitting of the spin levels observed by photoluminescence measurements under magnetic fields B↦ up to 29 T. In addition to being about three times greater than in zincblende InP, the g factor in the WZ phase is strongly anisotropic (50%) upon variation of the direction of B↦ from parallel to perpendicular to the NW axis. Moreover, it exhibits a marked sublinear dependence on B↦ whenever B↦ points along the NW axis, a feature common to other non-nitride III-V WZ NWs but never properly understood. All these features are well accounted for by a realistic k·p modeling of the Landau levels in WZ InP with the envelope function approximation including excitonic effects. The nonlinearity is spin dependent and due to the coupling between the heavy-hole- and light-hole-like Landau levels. This is indeed a general signature of the bulk WZ structure not requiring quantum confinement nor NW geometry, and is demonstrated to hold also for GaAs, InAs and GaN WZ crystals as reported by Faria Junior et al. Phys. Rev. B, present issue. Our study solves the outstanding puzzle of the nonlinear Zeeman splitting found in several III-V WZ NWs.
The ratios of inclusive electron scattering cross sections of 4He, 12C, and 56Fe to 3He have been measured at 1 < xB <. At Q2 > 1.4 GeV2, the ratios exhibit two separate plateaus, at 1.5 < xB < 2 and ...at xB > 2.25. This pattern is predicted by models that include 2- and 3-nucleon short-range correlations (SRC). Relative to A = 3, the per-nucleon probabilities of 3-nucleon SRC are 2.3, 3.1, and 4.4 times larger for A = 4, 12, and 56. This is the first measurement of 3-nucleon SRC probabilities in nuclei.
Purpose: To calculate the percentage depth dose of any irregular shape electron beam using modified lateral build‐up‐ratio method.Method and materials: Percentage depth dose (PDD) curves were ...measured using 6, 9, 12, and 15MeV electron beam energies for applicator cone sizes of 6×6, 10×10, 14×14, and 14×14cm2. Circular cutouts for each cone were prepared from 2.0cm diameter to the maximum possible size for each cone. In addition, three irregular cutouts were prepared. The scanning was done using a water tank and two diodes ‐ one for the signal and the other a stationary reference outside the tank. The water surface was determined by scanning the signal diode slowly from water to air and by noting the sharp change of the percentage depth dose curve at the water/air interface. Results: The lateral build‐up‐ratio (LBR) for each circular cutout was calculated from the measured PDD curve using the open field of the 14×14 cm2 cone as the reference field. Using the LBR values and the radius of the circular cutouts, the corresponding lateral spread parameter (sigma) of the electron shower was calculated. Unlike the commonly accepted assumption that sigma is independent of cutout size, it is shown that the sigma value increases linearly with circular cutout size. Using this characteristic of sigma, the PDD curves of irregularly shaped cutouts were calculated. Finally, the calculated PDD curves were compared with measured PDD curves. Conclusions: In this research, it is shown that sigma increases with cutout size. For radius of circular cutout sizes up to the equilibrium range of the electron beam, the increase of sigma with the cutout size is linear. The percentage difference of the calculated PDD from the measured PDD for irregularly shaped cutouts was under 1.0%. Similar Result was obtained for four electron beam energies (6, 9, 12, and 15MeV).
The MAJORANA DEMONSTRATOR is searching for double-beta decay of 76Ge to excited states (E.S.) in 76Se using a modular array of high purity Germanium detectors. 76Ge can decay into three E.S.s of ...76Se. The E.S. decays have a clear event signature consisting of a ββ-decay with the prompt emission of one or two γ-rays, resulting in with high probability in a multi-site event. The granularity of the DEMONSTRATOR detector array enables powerful discrimination of this event signature from backgrounds. Using 21.3 kg-y of isotopic exposure, the DEMONSTRATOR has set world leading limits for each E.S. decay, with 90% CL lower half-life limits in the range of (0.56 ‒ 2.1) ⋅ 1024 y. In particular, for the 2v transition to the first 0+ E.S. of 76Se, a lower half-life limit of 0.68 ⋅ 1024 at 90% CL was achieved.
The MAJORANA DEMONSTRATOR is an experiment constructed to search for neutrinoless double-beta decays in germanium-76 and to demonstrate the feasibility to deploy a ton-scale experiment in a phased ...and modular fashion. It consists of two modular arrays of natural and 76Ge-enriched germanium p-type point contact detectors totaling 44.1 kg, located at the 4850' level of the Sanford Underground Research Facility in Lead, South Dakota, USA. The DEMONSTRATOR uses custom high voltage cables to bias the detectors, as well as custom signal cables and connectors to read out the charge deposited at each detectors point contact. These low-mass cables and connectors must meet stringent radiopurity requirements while being subjected to thermal and mechanical stress. A number of issues have been identified with the currently installed cables and connectors. An improved set of cables and connectors for the MAJORANA DEMONSTRATOR are being developed with the aim of increasing their overall reliability and connectivity. We will discuss some of the issues encountered with the current cables and connectors as well as our improved designs and their initial performance.
PDF
