Electrochemical energy storage devices with a high energy density are an important technology in modern society, especially for electric vehicles. The most effective approach to improve the energy ...density of batteries is to search for high‐capacity electrode materials. According to the concept of energy quality, a high‐voltage battery delivers a highly useful energy, thus providing a new insight to improve energy density. Based on this concept, a novel and successful strategy to increase the energy density and energy quality by increasing the discharge voltage of cathode materials and preserving high capacity is proposed. The proposal is realized in high‐capacity Li‐rich cathode materials. The average discharge voltage is increased from 3.5 to 3.8 V by increasing the nickel content and applying a simple after‐treatment, and the specific energy is improved from 912 to 1033 Wh kg−1. The current work provides an insightful universal principle for developing, designing, and screening electrode materials for high energy density and energy quality.
Li‐ion batteries with high energy quality require a high capacity coupled with high operating voltage. This requires the electrode materials to not only have a high specific capacity but also a high discharge voltage for cathode materials and low charge voltage for anode materials.
Metal–organic framework cathodes usually exhibit low capacity and poor electrochemical performance for Li‐ion storage owing to intrinsic low conductivity and inferior redox activity. Now a ...redox‐active 2D copper–benzoquinoid (Cu‐THQ) MOF has been synthesized by a simple solvothermal method. The abundant porosity and intrinsic redox character endow the 2D Cu‐THQ MOF with promising electrochemical activity. Superior performance is achieved as a Li‐ion battery cathode with a high reversible capacity (387 mA h g−1), large specific energy density (775 Wh kg−1), and good cycling stability. The reaction mechanism is unveiled by comprehensive spectroscopic techniques: a three‐electron redox reaction per coordination unit and one‐electron redox reaction per copper ion mechanism is demonstrated. This elucidatory understanding sheds new light on future rational design of high‐performance MOF‐based cathode materials for efficient energy storage and conversion.
A high‐performance MOF: A conductive and redox‐active copper–benzoquinoid 2D metal–organic framework (MOF) with high capacity was designed for Li‐ion batterie. A new Li‐ion storage mechanism was unveiled by comprehensive spectroscopic methods.
Aqueous Zn batteries are promising energy storage devices for large-scale energy-storage due to low cost and high energy density. However, their lifespan is limited by the water decomposition and Zn ...dendrite growth. Here, we suppress water reduction and Zn dendrite growth in dilute aqueous electrolyte by adding dimethyl sulfoxide (DMSO) into ZnCl2–H2O, in which DMSO replaces the H2O in Zn2+ solvation sheath due to a higher Gutmann donor number (29.8) of DMSO than that (18) of H2O. The preferential solvation of DMSO with Zn2+ and strong H2O–DMSO interaction inhibit the decomposition of solvated H2O. In addition, the decomposition of solvated DMSO forms Zn12(SO4)3Cl3(OH)15·5H2O, ZnSO3, and ZnS enriched-solid electrolyte interphase (SEI) preventing Zn dendrite and further suppressing water decomposition. The ZnCl2–H2O–DMSO electrolyte enables Zn anodes in Zn||Ti half-cell to achieve a high average Coulombic efficiency of 99.5% for 400 cycles (400 h), and the Zn||MnO2 full cell with a low capacity ratio of Zn:MnO2 at 2:1 to deliver a high energy density of 212 Wh/kg (based on both cathode and anode) and maitain 95.3% of the capacity over 500 cycles at 8 C.
Iron fluoride, an intercalation-conversion cathode for lithium ion batteries, promises a high theoretical energy density of 1922 Wh kg
However, poor electrochemical reversibility due to repeated ...breaking/reformation of metal fluoride bonds poses a grand challenge for its practical application. Here we report that both a high reversibility over 1000 cycles and a high capacity of 420 mAh g
can be realized by concerted doping of cobalt and oxygen into iron fluoride. In the doped nanorods, an energy density of ~1000 Wh kg
with a decay rate of 0.03% per cycle is achieved. The anion's and cation's co-substitutions thermodynamically reduce conversion reaction potential and shift the reaction from less-reversible intercalation-conversion reaction in iron fluoride to a highly reversible intercalation-extrusion reaction in doped material. The co-substitution strategy to tune the thermodynamic features of the reactions could be extended to other high energy conversion materials for improved performance.
LiNixCoyMnzO2 (x+y+z=1)||graphite lithium‐ion battery (LIB) chemistry promises practical applications. However, its low‐temperature (≤ −20 °C) performance is poor because the increased resistance ...encountered by Li+ transport in and across the bulk electrolytes and the electrolyte/electrode interphases induces capacity loss and battery failures. Though tremendous efforts have been made, there is still no effective way to reduce the charge transfer resistance (Rct) which dominates low‐temperature LIBs performance. Herein, we propose a strategy of using low‐polarity‐solvent electrolytes which have weak interactions between the solvents and the Li+ to reduce Rct, achieving facile Li+ transport at sub‐zero temperatures. The exemplary electrolyte enables LiNi0.8Mn0.1Co0.1O2||graphite cells to deliver a capacity of ≈113 mAh g−1 (98 % full‐cell capacity) at 25 °C and to remain 82 % of their room‐temperature capacity at −20 °C without lithium plating at 1/3C. They also retain 84 % of their capacity at −30 °C and 78 % of their capacity at −40 °C and show stable cycling at 50 °C.
Low‐polarity‐solvent electrolytes (LPSEs) 1) enable the formation of the anion‐derived interphases on both electrodes and 2) have weak interactions between the solvent molecules and Li+, which provide fast Li+ transport kinetics and reduced resistance in both charge transfer process and Li+ transport in electrode/electrolyte interphases, achieving excellent battery performance under both fast‐charge and low‐temperature conditions.
The effect of H2O in electrolytes and in electrode lattices on the thermodynamics and kinetics of reversible multivalent‐ion intercalation chemistry based on a model platform of layered VOPO4 has ...been investigated. The presence of H2O at the electrolyte/electrode interface plays a key role in assisting Zn2+ diffusion from electrolyte to the surface, while H2O in the lattice structure alters the working potential. More importantly, a dynamic equilibrium between bulk electrode and electrolyte is eventually reached for H2O transport during the charge/discharge cycles, with the water activity serving as the key parameter determining the direction of water movement and the cycling stability.
Water of life: H2O at the electrolyte/electrode interface plays a key role in assisting Zn2+ diffusion from electrolytes to the bulk surface, while H2O in the lattice structure alters the working potential. A dynamic equilibrium between the bulk electrode and electrolyte is eventually established for H2O transport during the charge/discharge cycles.
Single‐atom catalysts (SACs) show great promise for electrochemical CO2 reduction reaction (CRR), but the low density of active sites and the poor electrical conduction and mass transport of the ...single‐atom electrode greatly limit their performance. Herein, we prepared a nickel single‐atom electrode consisting of isolated, high‐density and low‐valent nickel(I) sites anchored on a self‐standing N‐doped carbon nanotube array with nickel–copper alloy encapsulation on a carbon‐fiber paper. The combination of single‐atom nickel(I) sites and self‐standing array structure gives rise to an excellent electrocatalytic CO2 reduction performance. The introduction of copper tunes the d‐band electron configuration and enhances the adsorption of hydrogen, which impedes the hydrogen evolution reaction. The single‐nickel‐atom electrode exhibits a specific current density of −32.87 mA cm−2 and turnover frequency of 1962 h−1 at a mild overpotential of 620 mV for CO formation with 97 % Faradic efficiency.
If I had a nickel: An efficient NiI single‐atom electrode for the electrochemical CO2 reduction reaction is realized by combining the advantages of a single‐atom catalyst and a self‐standing nanoarray architecture.
Nickel‐rich layered materials LiNi1‐x‐yMnxCoyO2 are promising candidates for high‐energy‐density lithium‐ion battery cathodes. Unfortunately, they suffer from capacity fading upon cycling, especially ...with high‐voltage charging. It is critical to have a mechanistic understanding of such fade. Herein, synchrotron‐based techniques (including scattering, spectroscopy, and microcopy) and finite element analysis are utilized to understand the LiNi0.6Mn0.2Co0.2O2 material from structural, chemical, morphological, and mechanical points of view. The lattice structural changes are shown to be relatively reversible during cycling, even when 4.9 V charging is applied. However, local disorder and strain are induced by high‐voltage charging. Nano‐resolution 3D transmission X‐ray microscopy data analyzed by machine learning methodology reveal that high‐voltage charging induced significant oxidation state inhomogeneities in the cycled particles. Regions at the surface have a rock salt–type structure with lower oxidation state and build up the impedance, while regions with higher oxidization state are scattered in the bulk and are likely deactivated during cycling. In addition, the development of micro‐cracks is highly dependent on the pristine state morphology and cycling conditions. Hollow particles seem to be more robust against stress‐induced cracks than the solid ones, suggesting that morphology engineering can be effective in mitigating the crack problem in these materials.
Significant oxidation state inhomogeneities induced by high‐voltage charging are revealed for Ni‐rich Li ion battery cathode material by the machine‐learning methodology data analysis of nano‐resolution 3D transmission X‐ray microscopy. The formation and propagation of micro‐cracks are proven to be dependent on the morphology of secondary particles and cycling conditions.
High‐energy‐density batteries with a LiCoO2 (LCO) cathode are of significant importance to the energy‐storage market, especially for portable electronics. However, their development is greatly ...limited by the inferior performance under high voltages and challenging temperatures. Here, highly stable lithium (Li) metal batteries with LCO cathode, through the design of in situ formed, stable electrode/electrolyte interphases on both the Li anode and the LCO cathode, with an advanced electrolyte, are reported. The LCO cathode can deliver a high specific capacity of ≈190 mAh g−1 and show greatly improved cell performances under a high charge voltage of 4.5 V (even up to 4.55 V) and a wide temperature range from −30 to 55 °C. This work points out a promising approach for developing Li||LCO batteries for practical applications. This approach can also be used to improve the high‐voltage performance of other batteries in a broad temperature range.
High‐voltage LiCoO2 cathodes are highly desirable for various energy‐storage applications, especially when coupled with lithium metal anodes. Fluorine‐rich electrode/electrolyte interphases in situ formed in an advanced ether electrolyte are found to enable highly stable cell cycling under elevated temperatures. Such interphases effectively suppress electrolyte side reactions and preserve the integrity of both cathode and anode materials.
Immune checkpoint inhibitors had a great effect in triple-negative breast cancer (TNBC); however, they benefited only a subset of patients, underscoring the need to co-target alternative pathways and ...select optimal patients. Herein, we investigated patient subpopulations more likely to benefit from immunotherapy and inform more effective combination regimens for TNBC patients.
We conducted exploratory analyses in the FUSCC cohort to characterize a novel patient selection method and actionable targets for TNBC immunotherapy. We investigated this in vivo and launched a phase 2 trial to assess the clinical value of such criteria and combination regimen. Furthermore, we collected clinicopathological and next-generation sequencing data to illustrate biomarkers for patient outcomes.
CD8-positivity could identify an immunomodulatory subpopulation of TNBCs with higher possibilities to benefit from immunotherapy, and angiogenesis was an actionable target to facilitate checkpoint blockade. We conducted the phase II FUTURE-C-Plus trial to assess the feasibility of combining famitinib (an angiogenesis inhibitor), camrelizumab (a PD-1 monoclonal antibody) and chemotherapy in advanced immunomodulatory TNBC patients. Within 48 enrolled patients, the objective response rate was 81.3% (95% CI, 70.2-92.3), and the median progression-free survival was 13.6 months (95% CI, 8.4-18.8). No treatment-related deaths were reported. Patients with CD8- and/or PD-L1- positive tumors benefit more from this regimen. PKD1 somatic mutation indicates worse progression-free and overall survival.
This study confirms the efficacy and safety of the triplet regimen in immunomodulatory TNBC and reveals the potential of combining CD8, PD-L1 and somatic mutations to guide clinical decision-making and treatments.
ClinicalTrials.gov: NCT04129996 . Registered 11 October 2019.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
PDF
