ABSTRACT
We report an independent Doppler confirmation of the TESS planet candidate orbiting an F-type main-sequence star TOI−1408 located 140 pc away. We present a set of radial velocities obtained ...with a high-resolution fibre-optic spectrograph FFOREST mounted at the SAO RAS 6-m telescope (BTA-6). Our self-consistent analysis of these Doppler data and TESS photometry suggests a grazing transit such that the planet obscures its host star by only a portion of the visible disc. Because of this degeneracy, the radius of TOI−1408.01 appears ill-determined with lower limit about ∼1 RJup, significantly larger than in the current TESS solution. We also derive the planet mass of 1.69 ± 0.20 MJup and the orbital period ∼4.425 d, thus making this object a typical hot Jupiter, but with a significant orbital eccentricity of 0.259 ± 0.026. Our solution may suggest that the planet is likely to experience a high tidal eccentricity migration at the stage of intense orbital rounding, or may indicate possible presence of other unseen companions in the system, yet to be detected.
The paper describes the structure, operating principle and software of the ultrasonic velocity and air flow meter with the arrangement of sensors at the vertices of the tetrahedron. This design, with ...a minimum of sensors, makes it possible to measure the velocity components in three directions at once. The influence of dimensions of the construction on the metrological characteristics of the device is evaluated.
Objectives
The paper proposes a technique that allows the main types of clouds and cloud cover parameters (ceiling, direction and speed of cloud movement) to be determined at minimum cost via ...observations from the Earth’s surface. The aim is to avoid using meteorological information derived from official sources, which may not always be available for a specific place and time of observation.
Method
The method is based on the well-known Ippolitov formula that connects air humidity on the Earth’s surface with the cloud ceiling, whose empirical coefficients depend on the type of the cloud cover. In order to determine this type, a method based on elliptic cloud contour approximation is proposed.
Results
Additional classification features were the number of approximating ellipses in the image frame, the proximity of their mutual location, the total area that they occupy in the frame and the area occupied by the largest ellipse. The speed and direction of the clouds are determined through shifting the common key points in image frames obtained over a small fixed time interval. Each point is described by a descriptor calculated using the SURF method from the open image processing library OpenCV.
Conclusion
Despite the simplicity of the required software and hardware (web camera, humidity sensor, and OEM – Arduino module), this method provides a definition of these parameters with an error within 20%. Monitoring systems based on this method may be used in private automatic weather stations, such as the Wunderground, for obtaining more information that could improve the accuracy of weather forecasts, as well as for research in meteorology and climatology.
Objective
. The aim of the study is to develop methods for data compression in relation to monitoring systems.
Method
. The studies were carried out mainly experimentally, by processing data ...generated by the information-measuring system of the Altai State Technical University in the process of meteorological observations, temperature control and control of the consumption of such energy resources as hot and cold water, heat supply. However, when it was proposed to change their structure and presentation form to compact the stored data, the degree of compression was found theoretically.
Result
. The results of studies conducted with the participation of the author of the publication in the field of data processing, transmission and storage are presented. Methods for streaming data compression “on the fly” as it arrives, both lossy and lossless, as well as methods based on optimizing the structure of databases designed to store information collected during monitoring, are considered. The main attention is paid to the consideration of data compression created in the process of temperature monitoring, since it is the control and monitoring of temperature processes that is most common in various technical process control systems, heat metering systems both on the consumer side (housing and communal services) and on the side of the heat supply organization.
Conclusion
. In the vast majority of cases, lossless compression allows you to compress the information received from the monitoring system by more than 10 times, and lossy compression is much stronger, and without losing the pragmatic value of the stored information.
Antioxidant cytoprotective properties of mexidol have been studied under the influence of argon and helium gas-discharge cold plasma of atmospheric pressure on
Paramecium caudatum
cell culture. It ...has been shown that mexidol exhibits strong antioxidant properties and practically completely eliminates the negative effects of oxidative stress, retaining almost 100% of the initial number of cells. The data obtained demonstrate a wide range of behavioral responses of cells of
Paramecium caudatum
, which confirms their practical value as model objects for pharmacological and toxicological studies, and the use of gas-discharge cold plasma makes it possible to exclude the direct oxidative effect of hydrogen peroxide (the standard model of oxidative stress) on the studied drugs and to increase the reliability of toxicological studies.
The principle of operation of the capacitive proximity sensor is described. It can be used in various robotic complexes, automation systems and alarm devices to inform the control device of the ...approach to the sensor sensitive surface of an object. At the heart of the device is the measurement of the change in the current of the transient accompanying the charge of the reference capacitor because of the parallel connection to it the capacitance formed by the sensitive sensor surface and the external object. At the heart of the device is the measurement of the change in the current of the transient accompanying the charge of the reference capacitor caused by the parallel connection to it the capacitance formed by the sensitive sensor surface and the external object. As shown by theoretical and experimental studies, the value of this capacity, depending on the purpose of the device, can vary within very wide limits. In this case, the sensitive surface can be both a piece of ordinary wire several centimeters long, and a metall plate or grid, the area of which can reach units and even tens of square meters. The main advantage of the proposed solution is a significant reduction in the effect of spurious leakage currents arising at the capacitance of the measuring electrode under the influence of pollution and humidity of the environment.
The article deals with issues related to increasing the efficiency of the system of automatic maintenance of the temperature of liquid media entering the pipes to the place of consumption. For this ...purpose, a flowing water heater model is proposed, made in the SolidWorks environment, the construction parameters of which can be changed using the appropriate macro and screen form. It is shown that the choice of the location of the temperature sensor has a significant effect on such parameters of the device as the accuracy of maintaining a given temperature regime and the duration of the transient process caused by a change in the temperature of the liquid entering the heater. On a concrete example, it is shown that by changing the distance between the sensor and the heating module, it is possible to achieve minimum temperature fluctuations of the heat-transfer-agent at the heater outlet.
An example of information-measuring systems for climate monitoring and operational control of energy resources consumption of the university campus that is functioning in the Altai State Technical ...University since 2009. The advantages of using such systems for studying various physical processes are discussed. General principles of construction of similar systems, their software, hardware and algorithmic support are considered. It is shown that their fundamental difference from traditional SCADA - systems is the use of databases for storing the results of the observation with a specialized data structure, and by preprocessing of the input signal for its compression. Another difference is the absence of clear criteria for detecting the anomalies in the time series of the observed process. The examples of algorithms that solve this problem are given.
The article presents a method for obtaining quantitative signs of pulmonary pathology, based on the analysis of medical imaging computed tomography. These signs may be suitable for the differential ...diagnosis of spherical lung formations. In particular, the possibility of diagnosing cancer and pulmonary tuberculosis was investigated by quantitative statistical characteristics of images of spherical lung formations. Two of these characteristics (the densitometric value and its standard deviation) can be called classical, since modern basic software of computer tomographs can easily calculate them. In addition, characteristics were considered, for which it is necessary to carry out additional calculations using fractal analysis. The article presents the results of a study of the relationship of statistical and fractal characteristics of a tomographic image with the type of pathology in the lungs. The results of a statistical analysis of the fractal dimension of the region of interest and its related parameters are presented, and signs are found suitable for the diagnosis of pulmonary pathologies.