Dendrite growth of alkali metal anodes limited their lifetime for charge/discharge cycling. Here, we report near-perfect anodes of lithium, sodium, and potassium metals achieved by electrochemical ...polishing, which removes microscopic defects and creates ultra-smooth ultra-thin solid-electrolyte interphase layers at metal surfaces for providing a homogeneous environment. Precise characterizations by AFM force probing with corroborative in-depth XPS profile analysis reveal that the ultra-smooth ultra-thin solid-electrolyte interphase can be designed to have alternating inorganic-rich and organic-rich/mixed multi-layered structure, which offers mechanical property of coupled rigidity and elasticity. The polished metal anodes exhibit significantly enhanced cycling stability, specifically the lithium anodes can cycle for over 200 times at a real current density of 2 mA cm
with 100% depth of discharge. Our work illustrates that an ultra-smooth ultra-thin solid-electrolyte interphase may be robust enough to suppress dendrite growth and thus serve as an initial layer for further improved protection of alkali metal anodes.
Witnessed by the rapid increase of power conversion efficiency to 25.5%, organic–inorganic hybrid perovskite solar cells (PSCs) are becoming promising candidates of next‐generation photovoltaics. ...However, PSCs can be unstable under the influence of light and bias. Especially, grain boundaries (GBs) are vulnerable to attack by light and bias in perovskite films, leading to degradation of photovoltaic properties of PSCs. Herein, photocurrent atomic force microscopy and Kelvin probe force microscopy are employed to systematically investigate the bias‐dependent charge transport behaviors and stability of (FAPbI3)0.85(MAPbBr3)0.15 perovskite under working condition. Bias‐dependent morphology and photocurrent images show irreversible decomposition of the perovskite at a bias of 0.1 V or below, which is accelerated by light illumination, leading to formation of an interfacial layer that restricts carrier transport. Meanwhile, GBs appear to enhance carrier transport at larger bias, but serve as breakthrough sites for perovskite decomposition at smaller bias. Introducing excess methylammonium iodide promotes decomposition, while potassium iodide passivation greatly relieves the decomposition. These results support the ion migration mechanism of decomposition through interfaces and GBs. This work provides a deeper understanding of bias‐induced degradation of PSCs as well as bias‐dependent double‐edged roles of GBs, and forms valuable guidance for appropriate operation of PSCs.
Bias‐dependent stability of (FAPbI3)0.85(MAPbBr3)0.15 perovskite and double‐edged roles of grain boundaries in carrier transport and degradation of solar cells under working condition are systematically investigated. Photocurrent atomic force microscopy results show that grain boundaries enhance carrier transport at larger bias, but serve as breakthrough sites at smaller bias of 0.1 V or below when irreversible decomposition of perovskite occurs.
Sodium metal anodes are poor due to the reversibility of Na plating/stripping, which hinders their practical applications. A strategy to form a sodiophilic Au–Na alloy interphase on a Cu current ...collector, involving a sputtered Au thin layer, is shown to enable efficient Na plating/stripping for a certain period of time. Herein, electrochemical behaviors of Na plating on different substrates are explored, and it is revealed that the sodiophilic interphase can be achieved universally by in situ formation of M–Na (M = Au, Sn, and Sb) alloys during Na plating prior to Na bulk deposition in the initial cycle. Moreover, it is found that repetitive alloying–dealloying leads to falling‐off of thin film sodiophilic materials and thus limits the lifespan of efficient Na cycling. Therefore, an approach is further developed by employing particles of sodiophilic materials combined with the control over the cutoff potential, which significantly improves the stability of Na plating/stripping process. Especially, the low‐cost Cu@Sn‐NPs and Cu@Sb‐MPs composite current collectors allow Na plating and stripping to cycle for 2000 and 1700 times with the average efficiency of 99.9% at 2 mA cm−2.
Stable Na plating/stripping electrochemical behaviors are achieved by using the in situ formed sodiophilic sodium‐metal (metal = Au, Sn, Sb) alloy interphase. By simultaneous control over the stripping cut‐off potential and employment of anchored metal particles, Na plating/stripping cycling is extended to 2000 times at 2 mA cm−2 with an average Coulombic efficiency of 99.9% on the sodium‐metal alloy‐based interphase.
The rapid outbreak of coronavirus disease 2019 (COVID-19) has been a matter of international concern as the disease is spreading fast 1, 2. Considering that the contagious disease has led to an ...enormous impact globally, there is an urgent need to identify the risk populations with poor prognosis. Ageing is associated with certain changes in pulmonary physiology, pathology and function, during the period of lung infection. Therefore, age-related differences in responsiveness and tolerance become obvious and lead to worse clinical outcomes in elderly individuals 3. Previous studies have mentioned that older COVID-19 patients are at an increased risk of death 4–7. However, the age-related clinical characteristics, disease courses and outcomes other than death in COVID-19 patients remain unclear.
Age significantly determined the clinical features and prognosis of COVID-19. The prognosis was worse in patients older than 60 years, calling for clinicians to pay more attention to patients of this age.
https://bit.ly/34DTI05
MXene, an important and increasingly popular category of postgraphene 2D nanomaterials, has been rigorously investigated since early 2011 because of advantages including flexible tunability in ...element composition, hydrophobicity, metallic nature, unique in‐plane anisotropic structure, high charge‐carrier mobility, tunable band gap, and favorable optical and mechanical properties. To fully exploit these potentials and further expand beyond the existing boundaries, novel functional nanostructures spanning monolayer, multilayer, nanoparticles, and composites have been developed by means of intercalation, delamination, functionalization, hybridization, among others. Undeniably, the cutting‐edge developments and applications of clay‐inspired 2D MXene platform as electrochemical electrode or photo‐electrocatalyst have conferred superior performance and have made significant impact in the field of energy and advanced catalysis. This review provides an overview of the fundamental properties and synthesis routes of pure MXene, functionalized MXene and their hybrids, highlights the state‐of‐the‐art progresses of MXene‐based applications with respect to supercapacitors, batteries, electrocatalysis and photocatalysis, and presents the challenges and prospects in the burgeoning field.
An overview of the fundamental properties and synthesis routes of pure MXene, functionalized MXene, and their hybrids is provided. The state‐of‐the‐art progress of MXene‐based applications with respect to supercapacitors, batteries, electrocatalysis, and photocatalysis is highlighted, and the challenges and prospects in the burgeoning field of MXene are presented.
Display omitted
•A facile quasi-polymeric calcinations method is used to synthesize the p-n type LaFeO3/g-C3N4 heterostructured hybrid.•Deposition of nanosized g-C3N4 on LaFeO3 microsphere slowed ...electron-hole recombination and upped charge carriers’ lifetime.•P-n type LaFeO3/g-C3N4 heterostructured hybrid had much higher photocatalytic activity than pristine g-C3N4 and LaFeO3.•A Z-scheme charge carrier transfer pathway proposed based on solid p-n heterojunction interfacial interaction.
Materials of perovskite-type structure have attracted considerable attention for their applications in photocatalysis. In this study, a novel composite of p-type LaFeO3 microsphere coated with n-type nanosized graphitic carbon nitride nanosheets was constructed by the quasi-polymeric calcination method with the aid of electrostatic self-assembly interaction. Results indicate that the LaFeO3/g-C3N4p-n heterostructured photocatalyst obtained, in contrast to the pure constituents, enabled improved visible-light absorption, and more efficient separation and migration of charge carriers via solid p-n heterojunction interfacial effect. Correspondingly, the LaFeO3/g-C3N4 composite allowed for higher visible-light-responsive photocatalytic activity for the degradation of Brilliant Blue, which was 16.9 and 7.8 times that of pristine g-C3N4 and LaFeO3, respectively. The photocatalytic degradation of Brilliant Blue was ascribed to the combined contributions of the photogenerated holes (h+), superoxide radicals (O2−) and hydroxyl radicals (OH). Based on solid p-n heterojunction interfacial interaction, a Z-scheme charge carrier transfer pathway integrated with the dye-sensitization effect is proposed as the underlying mechanism of the photocatalytic reaction process. Therefore, we believe that the perovskite-type LaFeO3/g-C3N4 Z-scheme photcatalyst promotes the development of photocatalysis and holds much promise for environmental remediation.
Perovskite solar cells are strong competitors for silicon-based ones, but suffer from poor long-term stability, for which the intrinsic stability of perovskite materials is of primary concern. ...Herein, we prepared a series of well-defined cesium-containing mixed cation and mixed halide perovskite single-crystal alloys, which enabled systematic investigations on their structural stabilities against light, heat, water, and oxygen. Two potential phase separation processes are evidenced for the alloys as the cesium content increases to 10% and/or bromide to 15%. Eventually, a highly stable new composition, (FAPbI3)0.9(MAPbBr3)0.05(CsPbBr3)0.05, emerges with a carrier lifetime of 16 μs. It remains stable during at least 10 000 h water–oxygen and 1000 h light stability tests, which is very promising for long-term stable devices with high efficiency. The mechanism for the enhanced stability is elucidated through detailed single-crystal structure analysis. Our work provides a single-crystal-based paradigm for stability investigation, leading to the discovery of stable new perovskite materials.
Red ginseng polysaccharide (RGP) is an active component of the widely used medicinal plant Panax ginseng C. A. Meyer (Araliaceae), which has displayed promising activities against cancer cells. ...However, the detailed molecular mechanism of RGP in ferroptosis is still unknown.
This study evaluates the effects of RGP in cancer cells.
A549 and MDA-MB-231 cells were used. Cell proliferation was measured by CCK-8 assay after being treated with RGP at concentrations of 0, 50, 100, 200, 400, 800 and 1600 μg/mL at 0, 12, 24 and 48 h. Lipid reactive oxygen species (ROS) levels were assessed by C11-BODIPY assay. The control group was treated with PBS.
RGP inhibited human A549 (IC
50
: 376.2 μg/mL) or MDA-MB-231(IC
50
: 311.3 μg/mL) proliferation and induced lactate dehydrogenase (LDH) release, promoted ferroptosis and suppressed the expression of GPX4. Moreover, the effects of RGP were enhanced by the ferroptosis inducer erastin, while abolished by ferroptosis inhibitor ferrostatin-1.
Our study is the first to demonstrate (1) the anticancer activity of RGP in human lung cancer and breast cancer. (2) RGP presented the anti-ferroptosis effects in lung and breast cancer cells via targeting GPX4.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, UILJ, UKNU, UL, UM, UPUK
Gibberellin (GA), a diterpene hormone, plays diverse roles in plant growth and development, including seed germination, stem elongation, and flowering time. Although it is known that GA accelerates ...flowering through degradation of transcription repressors, DELLAs, the underlying mechanism is poorly understood. We show here that DELLA directly binds to microRNA156 (miR156)-targeted SQUAMOSA PROMOTER BINDING-LIKE (SPL) transcription factors, which promote flowering by activating miR172 and MADS box genes. The interaction between DELLA and SPL interferes with SPL transcriptional activity and consequently delays floral transition through inactivating miR172 in leaves and MADS box genes at shoot apex under long-day conditions or through repressing MADS box genes at the shoot apex under short-day conditions. Our results elucidate the molecular mechanism by which GA controls flowering and provide the missing link between DELLA and MADS box genes.