It is challenging to grow an epitaxial 4-fold compound superconductor (SC) on a 6-fold topological insulator (TI) platform due to the stringent lattice-matching requirement. Here, we demonstrate that ...Fe(Te,Se) can grow epitaxially on a TI (Bi2Te3) layer due to accidental, uniaxial lattice match, which is dubbed as “hybrid symmetry epitaxy”. This new growth mode is critical to stabilizing robust superconductivity with T C as high as 13 K. Furthermore, the superconductivity in this FeTe1–x Se x /Bi2Te3 system survives in the Te-rich phase with Se content as low as x = 0.03 but vanishes at Se content above x = 0.56, exhibiting a phase diagram that is quite different from that of the conventional Fe(Te,Se) systems. This unique heterostructure platform that can be formed in both TI-on-SC and SC-on-TI sequences opens a route to unprecedented topological heterostructures.
Display omitted
With the development of novel semiconductors for optoelectronic applications, new device functionalities utilizing unique characteristics of emerging materials can be particularly ...appealing. Here, we demonstrate a reversible control of photoluminescence (PL) emission from lead-halide perovskites achieved in perovskite electric-double-layer transistors. PL in several prototypical lead-halide perovskite compounds is shown to be reversibly tuned by a small gate voltage in the range ±1.2 V applied to the ionic-liquid gel on the perovskite surface, with the intensity modulation that can reach one to two orders of magnitude. This effect may be mediated by a reversible migration of oxygen ions affecting the crystal region near the interface with the ion gel. The resulting passivation (or activation) of non-radiative recombination centers (traps) by oxygen ions would then modulate the population of mobile photogenerated electrons and holes that give rise to PL, which is thus tuned with an electric “knob” (the gate) in these devices.
Magnetic topological insulator is a fertile platform to study the interplay between magnetism and topology. The unique electronic band structure can induce exotic transport and optical properties. ...However, a comprehensive optical study in both near-infrared frequency and terahertz frequency has been lacking. Here, we report magneto-optical effects from a heterostructure of Cr-incorporated topological insulator, CBST. We use 800 nm magneto-optical Kerr effect to reveal a ferromagnetic order in the CBST film with a high transition temperature at 160 K. We also use time-domain terahertz polarimetry to reveal a terahertz Faraday rotation of 1.5 mrad and Kerr rotation of 5.1 mrad at 2 K. The calculated terahertz Hall conductance is 0.42 \(e^2/h\). Our work shows the optical responses of an artificially layered magnetic topological insulator, paving the way towards high-temperature quantum anomalous Hall effect via heterostructure engineering.
Highly crystalline and easily feasible topological insulator–superconductor (TI-SC) heterostructures are crucial for the development of practical topological qubit devices. The optimal ...superconducting layer for TI-SC heterostructures should be highly resilient against external contamination and structurally compatible with TIs. In this study, we provide a solution to this challenge by showcasing the growth of a highly crystalline TI-SC heterostructure using refractory TiN (111) as the superconducting layer. This approach can eliminate the need for in situ cleavage or growth. More importantly, the TiN surface shows high resilience against contaminations during air exposure, as demonstrated by the successful recyclable growth of Bi2Se3. Our findings indicate that TI-SC heterostructures based on nitride films are compatible with device fabrication techniques, paving the way to the realization of practical topological qubit devices in the future.
Epitaxial Fe(Te,Se) thin films have been grown on various substrates but never been grown on magnetic layers. Here we report the epitaxial growth of fourfold Fe(Te,Se) film on a sixfold ...antiferromagnetic insulator, MnTe. The Fe(Te,Se)/MnTe heterostructure shows a clear superconducting transition at around 11 K, and the critical magnetic field measurement suggests the origin of the superconductivity to be bulk-like. Structural characterizations suggest that the uniaxial lattice match between Fe(Te,Se) and MnTe allows a hybrid symmetry epitaxy mode, which was recently discovered between Fe(Te,Se) and Bi2Te3. Furthermore, the Te/Fe flux ratio during deposition of the Fe(Te,Se) layer is found to be critical for its superconductivity. Now that superconducting Fe(Te,Se) can be grown on two related hexagonal platforms, Bi2Te3 and MnTe, this result opens a new possibility of combining topological superconductivity of Fe(Te,Se) with the rich physics in the intrinsic magnetic topological materials (MnTe) n (Bi2Te3) m family.
Quantum anomalous Hall effect (QAHE) was discovered a decade ago, but is still not utilized beyond a handful of research groups, due to numerous limitations such as extremely low temperature, ...electric field-effect gating requirement, small sample sizes and environmental aging effect. Here, we present a robust platform that provides effective solutions to these problems. Specifically, on this platform, we observe QAH signatures at record high temperatures, with the Hall conductance of 1.00 e2/h at 2.0 K, 0.98 e2/h at 4.2 K, and 0.92 e2/h at 10 K, on centimeter-scale substrates, without electric-field-effect gating. The key ingredient is an active CrOx capping layer, which substantially boosts the ferromagnetism while suppressing environmental degradation. With this development, QAHE will now be accessible to much broader applications than before.
Multiferroics permit the magnetic control of the electric polarization and the electric control of the magnetization. These static magnetoelectric (ME) effects are of enormous interest: The ability ...to read and write a magnetic state current-free by an electric voltage would provide a huge technological advantage. Dynamic or optical ME effects are equally interesting, because they give rise to unidirectional light propagation as recently observed in low-temperature multiferroics. This phenomenon, if realized at room temperature, would allow the development of optical diodes which transmit unpolarized light in one, but not in the opposite, direction. Here, we report strong unidirectional transmission in the room-temperature multiferroic BiFeO3 over the gigahertz-terahertz frequency range. The supporting theory attributes the observed unidirectional transmission to the spin-current-driven dynamic ME effect. These findings are an important step toward the realization of optical diodes, supplemented by the ability to switch the transmission direction with a magnetic or electric field.
In the recent past, MnTe has proven to be a crucial component of the intrinsic magnetic topological insulator (IMTI) family MnTemBi2Te3n, which hosts a wide range of magneto-topological properties ...depending on the choice of m and n. However, bulk crystal growth allows only a few combinations of m and n for these IMTIs due to the strict limitations of the thermodynamic growth conditions. One way to overcome this challenge is to utilize atomic layer-by-layer molecular beam epitaxy (MBE) technique, which allows arbitrary sequences of MnTem and Bi2Te3n to be formed beyond the thermodynamic limit. For such MBE growth, finding optimal growth templates and conditions for the parent building block, MnTe, is a key requirement. Here, we report that two different hexagonal phases of MnTe-nickeline (NC) and zinc-blende/wurtzite (ZB-WZ) structures, with distinct in-plane lattice constants of 4.20 +/- 0.04 A and 4.39 +/- 0.04 A, respectively-can be selectively grown on c-plane Al2O3 substrates using different buffer layers and growth temperatures. Moreover, we provide the first comparative studies of different MnTe phases using atomic-resolution scanning transmission electron microscopy and show that ZB and WZ-like stacking sequences can easily alternate between the two. Surprisingly, In2Se3 buffer layer, despite its lattice constant (4.02 A) being closer to that of the NC phase, fosters the ZB-WZ instead, whereas Bi2Te3, sharing the same lattice constant (4.39 A) with the ZB-WZ phase, fosters the NC phase. These discoveries suggest that lattice matching is not always the most critical factor determining the preferred phase during epitaxial growth. Overall, this will deepen our understanding of epitaxial growth modes for chalcogenide materials and accelerate progress toward new IMTI phases as well as other magneto-topological applications.
Highly crystalline and easily feasible topological insulator-superconductor (TI-SC) heterostructures are crucial for the development of practical topological qubit devices. The optimal ...superconducting layer for TI-SC heterostructures should be highly resilient against external contaminations and structurally compatible with TIs. In this study, we provide a solution to this challenge by showcasing the growth of a highly crystalline TI-SC heterostructure using refractory TiN (111) as the superconducting layer. This approach can eliminate the need for in-situ cleaving or growth. More importantly, the TiN surface shows high resilience against contaminations during air exposure, as demonstrated by the successful recyclable growth of Bi2Se3. Our findings indicate that TI-SC heterostructures based on nitride films are compatible with device fabrication techniques, paving a path to the realization of practical topological qubit devices in the future.
Product inhibition caused by organic acids is a serious issue in establishing economical biochemical production systems. Herein, for enhanced production of glutaric acid by overcoming product ...inhibition triggered by glutaric acid, a whole-cell bioconversion system equipped with biocatalyst recycling process and in situ product recovery by adsorption was developed successfully. From the whole-cell bioconversion reaction, we found that both dissociated and undissociated forms of glutaric acid acted as an inhibitor in the whole-cell bioconversion reaction, wherein bioconversion was hindered beyond 200 mM glutaric acid regardless of reaction pH. Therefore, as the promising solution for the inhibition issue by glutaric acid, the biocatalyst-recycled bioconversion process integrated with in situ product recovery by adsorption was introduced in the whole-cell bioconversion. As a result, 592 mM glutaric acid was produced from 1000 mM 5-aminovaleric acid with 59.2% conversion. We believe that our system will be a promising candidate for economically producing organic acids with high titer.
•Inhibition of glutaric acid was observed in whole-cell bioconversion.•Biocatalyst-recycled bioconversion process equipped adsorption was introduced.•592 mM glutaric acid was produced from 1000 mM 5-AVA in whole-cell bioconversion.•The deleterious effects on biocatalyst fitness during bioconversion were improved.
PDF
