Hydrogen economy has emerged as a very promising alternative to the current hydrocarbon economy, which involves the process of harvesting renewable energy to split water into hydrogen and oxygen and ...then further utilization of clean hydrogen fuel. The production of hydrogen by water electrolysis is an essential prerequisite of the hydrogen economy with zero carbon emission. Among various water electrolysis technologies, alkaline water splitting has been commercialized for more than 100 years, representing the most mature and economic technology. Here, the historic development of water electrolysis is overviewed, and several critical electrochemical parameters are discussed. After that, advanced nonprecious metal electrocatalysts that emerged recently for negotiating the alkaline oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are discussed, including transition metal oxides, (oxy)hydroxides, chalcogenides, phosphides, and nitrides for the OER, as well as transition metal alloys, chalcogenides, phosphides, and carbides for the HER. In this section, particular attention is paid to the catalyst synthesis, activity and stability challenges, performance improvement, and industry‐relevant developments. Some recent works about scaled‐up catalyst synthesis, novel electrode designs, and alkaline seawater electrolysis are also spotlighted. Finally, an outlook on future challenges and opportunities for alkaline water splitting is offered, and potential future directions are speculated.
The hydrogen economy has emerged as a very promising alternative to the current hydrocarbon economy, which involves the process of harvesting renewable energy to split water into hydrogen and oxygen and then further utilization of hydrogen fuel. Alkaline water splitting represents the most mature and economic technology for clean hydrogen production, making high potential for successful implementation of hydrogen economy.
Boron‐embedded heteroacenes (boraacenes) have attracted enormous interest in organic chemistry and materials science. However, extending the skeleton of boraacenes to higher acenes (N≥6) is ...synthetically challenging because of their limited stability under ambient conditions. Herein, we report the synthesis of boron‐embedded heptacene (DBH) and nonacene (DBN) as the hitherto longest boraacenes. The former is highly stable (even after 240 h in tetrahydrofuran), while the latter is air‐sensitive with the half‐life (t1/2) of 11.8 min. The structures of both compounds are verified by single‐crystal X‐ray diffraction, revealing a linear backbone with an antiaromatic C4B2 core. Photophysical characterizations associated with theoretical calculations indicate that both compounds exhibit highly efficient anti‐Kasha emissions. Remarkably, the air‐stable DBH manifests an ultrahigh photoluminescence quantum yield (PLQY) of 98±2 % and can be chemically reduced to its radical anion and dianion states, implying the value of boron‐doped higher acenes as novel functional materials.
Dihydrodiboraheptacene and dihydrodiboranonacene, the hitherto longest boron‐embedded heteroacenes, have been successfully synthesized. Both compounds exhibit highly efficient anti‐Kasha emissions through the thermal population mechanism, and the photoluminescence quantum yield (PLQY) of dihydrodiboraheptacene is as high as 98±2 %. This work provides new opportunities for the development of novel boraacene‐based functional materials.
The performance of Li‐ion batteries (LIBs) is highly dependent on their interfacial chemistry, which is regulated by electrolytes. Conventional electrolyte typically contains polar solvents to ...dissociate Li salts. Herein we report a weakly solvating electrolyte (WSE) that consists of a pure non‐polar solvent, which leads to a peculiar solvation structure where ion pairs and aggregates prevail under a low salt concentration of 1.0 M. Importantly, WSE forms unique anion‐derived interphases on graphite electrodes that exhibit fast‐charging and long‐term cycling characteristics. First‐principles calculations unravel a general principle that the competitive coordination between anions and solvents to Li ions is the origin of different interfacial chemistries. By bridging the gap between solution thermodynamics and interfacial chemistry in batteries, this work opens a brand‐new way towards precise electrolyte engineering for energy storage devices with desired properties.
A weakly solvating electrolyte affords a new path towards anion‐derived interfacial chemistry in lithium‐ion batteries. By formulating electrolyte with a non‐polar solvent, ion pairs and aggregates prevail under normal concentrations and give rise to anion‐derived interphases on graphite electrodes with superior electrochemical performances.
Understanding the electrode/electrolyte interfacial chemistry is the cornerstone of designing lithium-ion batteries (LIBs) with superior performance. Graphite has been exclusively utilized as the ...anode material in state-of-the-art LIBs, whose interfacial chemistry has a profound impact on battery life and power delivery. However, current understanding of the graphite/electrolyte interface is still incomplete because of its intricate nature, which has driven unremitting explorations and breakthroughs in the past few decades. On the one hand, the applications of emerging experimental and computational tools have led researchers to re-examine several decades-old problems, such as the underlying mechanism of solid electrolyte interphase (SEI) formation and the co-intercalation mystery. On the other hand, from anion-derived interfacial chemistry to artificial interphases, novel interfacial chemistry for graphite is being proposed to replace the traditional ethylene carbonate-derived SEI for better performances. By summarizing the latest advances in the emerging interfacial chemistry of graphite anodes in LIBs, this review affords a fresh perspective on interface science and engineering towards next-generation energy storage devices.
Emerging interfacial chemistry of the graphite anode in today's lithium-ion batteries paves the way to next-generation, high-performance energy storage devices.
The lithium metal anode is regarded as a promising candidate in next‐generation energy storage devices. Lithium nitrate (LiNO3) is widely applied as an effective additive in ether electrolyte to ...increase the interfacial stability in batteries containing lithium metal anodes. However, because of its poor solubility LiNO3 is rarely utilized in the high‐voltage window provided by carbonate electrolyte. Dissolution of LiNO3 in carbonate electrolyte is realized through an effective solvation regulation strategy. LiNO3 can be directly dissolved in an ethylene carbonate/diethyl carbonate electrolyte mixture by adding trace amounts of copper fluoride as a dissolution promoter. LiNO3 protects the Li metal anode in a working high‐voltage Li metal battery. When a LiNi0.80Co0.15Al0.05O2 cathode is paired with a Li metal anode, an extraordinary capacity retention of 53 % is achieved after 300 cycles (13 % after 200 cycles for LiNO3‐free electrolyte) and a very high average Coulombic efficiency above 99.5 % is achieved at 0.5 C. The solvation chemistry of LiNO3‐containing carbonate electrolyte may sustain high‐voltage Li metal anodes operating in corrosive carbonate electrolytes.
Liquid assets: LiNO3 can be dissolved directly in an ethylene carbonate/diethyl carbonate electrolyte mixture by adding a trace amount of copper fluoride to promote dissolution. The solvation structure of the electrolyte system protects the lithium metal anode in a working high‐voltage lithium metal battery. NCA=LiNi0.80Co0.15Al0.05O2.
Lithium‐ion batteries with routine carbonate electrolytes cannot exhibit satisfactory fast‐charging performance and lithium plating is widely observed at low temperatures. Herein we demonstrate that ...a localized high‐concentration electrolyte consisting of 1.5 M lithium bis(fluorosulfonyl)imide in dimethoxyethane with bis(2,2,2‐trifluoroethyl) ether as the diluent, enables fast‐charging of working batteries. A uniform and robust solid electrolyte interphase (SEI) can be achieved on graphite surface through the preferential decomposition of anions. The established SEI can significantly inhibit ether solvent co‐intercalation into graphite and achieve highly reversible Li+ intercalation/de‐intercalation. The graphite | Li cells exhibit fast‐charging potential (340 mAh g−1 at 0.2 C and 220 mAh g−1 at 4 C), excellent cycling stability (ca. 85.5 % initial capacity retention for 200 cycles at 4 C), and impressive low‐temperature performance.
The unique solvation structure in a localized high‐concentration electrolyte can suppress co‐intercalation of ether solvent into the graphite interlayers and render fast‐charging of practical lithium‐ion batteries.
Lithium metal is recognized as one of the most promising anode materials owing to its ultrahigh theoretical specific capacity and low electrochemical potential. Nonetheless, dendritic Li growth has ...dramatically hindered the practical applications of Li metal anodes. Realizing spherical Li deposition is an effective approach to avoid Li dendrite growth, but the mechanism of spherical deposition is unknown. Herein, a diffusion‐reaction competition mechanism is proposed to reveal the rationale of different Li deposition morphologies. By controlling the rate‐determining step (diffusion or reaction) of Li deposition, various Li deposition scenarios are realized, in which the diffusion‐controlled process tends to lead to dendritic Li deposition while the reaction‐controlled process leads to spherical Li deposition. This study sheds fresh light on the dendrite‐free Li metal anode and guides to achieve safe batteries to benefit future wireless and fossil‐fuel‐free world.
Sphere factor: A diffusion–reaction competition mechanism reveals the principle of spherical Li deposition. By controlling the rate‐determining step of Li deposition, different Li deposition scenarios are revealed, in which the diffusion‐controlled process tends to give dendritic Li deposition while the reaction‐controlled process leads to spherical Li deposition.
Substrate‐supported metal–organic frameworks (MOFs) films are desired to realize their potential in practical applications. Herein, a novel substrate‐seeding secondary‐growth strategy is developed to ...prepare composites of uniform MOFs films on aerogel walls. Briefly, the organic ligand is “pre‐seeded” onto the aerogel walls, and then a small amount of metal‐ion solution is sprayed onto the prepared aerogel. The sprayed solution diffuses along the aerogel walls to form a continuous thin layer, which confines the nucleation reaction, promoting the formation of uniform MOFs films on the aerogel walls. The whole process is simple in operation, highly efficient, and eco‐friendly. The resulting hierarchical MOFs/aerogel composites have abundant accessible active sites and enable excellent mass transfer, which endows the composite with outstanding catalytic activity and stability in both liquid‐phase CO2 cycloaddition and electrochemical oxygen evolution reaction (OER) process.
Metal–organic framework (MOF) thin films are coated onto the walls of aerogel giving MOFs/aerogel composites. These have abundant accessible active sites and excellent mass transfer ability, and thus a relatively high catalytic activity and stability in the CO2 cycloaddition and oxygen evolution reaction (OER).
Lithium (Li) metal anodes hold great promise for next‐generation high‐energy‐density batteries, while the insufficient fundamental understanding of the complex solid electrolyte interphase (SEI) is ...the major obstacle for the full demonstration of their potential in working batteries. The characteristics of SEI highly depend on the inner solvation structure of lithium ions (Li+). Herein, we clarify the critical significance of cosolvent properties on both Li+ solvation structure and the SEI formation on working Li metal anodes. Non‐solvating and low‐dielectricity (NL) cosolvents intrinsically enhance the interaction between anion and Li+ by affording a low dielectric environment. The abundant positively charged anion–cation aggregates generated as the introduction of NL cosolvents are preferentially brought to the negatively charged Li anode surface, inducing an anion‐derived inorganic‐rich SEI. A solvent diagram is further built to illustrate that a solvent with both proper relative binding energy toward Li+ and dielectric constant is suitable as NL cosolvent.
The introduction of cosolvents with non‐solvating and low‐dielectricity (NL) properties can intrinsically enhance the interaction between anion and Li+ and regulate the solvation structures in electrolytes, which favors an upgraded anion‐derived solid electrolyte interphase (SEI) on lithium metal anodes.
We investigate a new mechanism to create large curvature perturbations on small scales due to parameter resonance in a single-field inflationary model with a small periodic structure upon the ...potential. After reentering the horizon, the amplified curvature perturbations can lead to observable primordial black holes as well as stochastic gravitational waves. The mass of primordial black holes and frequency of the induced gravitational waves depend on the model parameters. The resulted primordial black hole could constitute all dark matter or a fraction of dark matter in the universe, and corresponding stochastic gravitational waves fall in the frequency band measurable for the pulsar timing array and the space-based gravitational wave detectors.
PDF
