The all‐inorganic nature of CsPbI3 perovskites allows to enhance stability in perovskite devices. Research efforts have led to improved stability of the black phase in CsPbI3 films; however, these ...strategies—including strain and doping—are based on organic‐ligand‐capped perovskites, which prevent perovskites from forming the close‐packed quantum dot (QD) solids necessary to achieve high charge and thermal transport. We developed an inorganic ligand exchange that leads to CsPbI3 QD films with superior phase stability and increased thermal transport. The atomic‐ligand‐exchanged QD films, once mechanically coupled, exhibit improved phase stability, and we link this to distributing strain across the film. Operando measurements of the temperature of the LEDs indicate that KI‐exchanged QD films exhibit increased thermal transport compared to controls that rely on organic ligands. The LEDs exhibit a maximum EQE of 23 % with an electroluminescence emission centered at 640 nm (FWHM: ≈31 nm). These red LEDs provide an operating half‐lifetime of 10 h (luminance of 200 cd m−2) and an operating stability that is 6× higher than that of control devices.
Stable and efficient CsPbI3 perovskite light‐emitting diodes (PLEDs) are demonstrated by resurfacing perovskite with the aid of inorganic ligands (KI). The resurfaced perovskites show a 7× higher phase stability and higher thermal conductivity than in films with organic ligands. The PLEDs exhibit a record‐high external quantum efficiency (EQE) of ≈23 % and a 100‐fold improvement in the operating stability compared to previous EQE devices.
Planar perovskite solar cells (PSCs) made entirely via solution processing at low temperatures (<150°C) offer promise for simple manufacturing, compatibility with flexible substrates, and ...perovskite-based tandem devices. However, these PSCs require an electron-selective layer that performs well with similar processing. We report a contact-passivation strategy using chlorine-capped TiO₂ colloidal nanocrystal film that mitigates interfacial recombination and improves interface binding in low-temperature planar solar cells. We fabricated solar cells with certified efficiencies of 20.1 and 19.5% for active areas of 0.049 and 1.1 square centimeters, respectively, achieved via low-temperature solution processing. Solar cells with efficiency greater than 20% retained 90% (97% after dark recovery) of their initial performance after 500 hours of continuous room-temperature operation at their maximum power point under 1-sun illumination (where 1 sun is defined as the standard illumination at AM1.5, or 1 kilowatt/square meter).
Deep-blue light-emitting diodes (LEDs) (emitting at wavelengths of less than 450 nm) are important for solid-state lighting, vivid displays and high-density information storage. Colloidal quantum ...dots, typically based on heavy metals such as cadmium and lead, are promising candidates for deep-blue LEDs, but these have so far had external quantum efficiencies lower than 1.7%. Here we present deep-blue light-emitting materials and devices based on carbon dots. The carbon dots produce emission with a narrow full-width at half-maximum (about 35 nm) with high photoluminescence quantum yield (70% ± 10%) and a colour coordinate (0.15, 0.05) closely approaching the standard colour Rec. 2020 (0.131, 0.046) specification. Structural and optical characterization, together with computational studies, reveal that amine-based passivation accounts for the efficient and high-colour-purity emission. Deep-blue LEDs based on these carbon dots display high performance with a maximum luminance of 5,240 cd m−2 and an external quantum efficiency of 4%, notably exceeding that of previously reported quantum-tuned solution-processed deep-blue LEDs.Deep-blue high-colour-purity light-emitting materials are developed by using amine-based edge passivation. The light-emitting diodes based on the carbon dots exhibit a maximum luminance of 5,240 cd m–2 and an external quantum efficiency of 4%.
The density of trap states within the bandgap of methylammonium lead iodide single crystals is investigated. Defect states close to both the conduction and valence bands are probed. Additionally, a ...comprehensive electronic characterization of crystals is carried out, including measurements of the electron and hole mobility, and the energy landscape (band diagram) at the surface.
Light-emitting diodes (LEDs) based on metal halide perovskite quantum dots (QDs) have achieved impressive external quantum efficiencies; however, the lack of surface protection of QDs, combined with ...efficiency droop, decreases device operating lifetime at brightnesses of interest. The epitaxial incorporation of QDs within a semiconducting shell provides surface passivation and exciton confinement. Achieving this goal in the case of perovskite QDs remains an unsolved challenge in view of the materials’ chemical instability. Here, we report perovskite QDs that remain stable in a thin layer of precursor solution of perovskite, and we use strained QDs as nucleation centers to drive the homogeneous crystallization of a perovskite matrix. Type-I band alignment ensures that the QDs are charge acceptors and radiative emitters. The new materials show suppressed Auger bi-excition recombination and bright luminescence at high excitation (600 W cm–2), whereas control materials exhibit severe bleaching. Primary red LEDs based on the new materials show an external quantum efficiency of 18%, and these retain high performance to brightnesses exceeding 4700 cd m–2. The new materials enable LEDs having an operating half-life of 2400 h at an initial luminance of 100 cd m–2, representing a 100-fold enhancement relative to the best primary red perovskite LEDs.
Perovskite‐based light‐emitting diodes (PeLEDs) are now approaching the upper limits of external quantum efficiency (EQE); however, their application is currently limited by reliance on lead and by ...inadequate color purity. The Rec. 2020 requires Commission Internationale de l'Eclairage coordinates of (0.708, 0.292) for red emitters, but present‐day perovskite devices only achieve (0.71, 0.28). Here, lead‐free PeLEDs are reported with color coordinates of (0.706, 0.294)—the highest purity reported among red PeLEDs. The variation of the emission spectrum is also evaluated as a function of temperature and applied potential, finding that emission redshifts by <3 nm under low temperature and by <0.3 nm V−1 with operating voltage. The prominent oxidation pathway of Sn is identified and this is suppressed with the aid of H3PO2. This strategy prevents the oxidation of the constituent precursors, through both its moderate reducing properties and through its forming complexes with the perovskite that increase the energetic barrier toward Sn oxidation. The H3PO2 additionally seeds crystal growth during film formation, improving film quality. PeLEDs are reported with an EQE of 0.3% and a brightness of 70 cd m−2; this is the record among reported red‐emitting, lead‐free PeLEDs.
Sn‐based perovskite light‐emitting diodes with ultra‐high red color purity, a brightness of 70 cd m−2, and 24 nm linewidth are prepared. The devices show excellent color stability under different temperatures, power, and operating voltage. Based on the oxidation pathway of Sn, H3PO2 is chosen to suppress the oxidation of Sn2+ and slow down the crystal growth, simultaneously.
The cell‐to‐cell transfer of α‐synuclein (α‐Syn) greatly contributes to Parkinson's disease (PD) pathogenesis and underlies the spread of α‐Syn pathology. During this process, extracellular α‐Syn can ...activate microglia and neuroinflammation, which plays an important role in PD. However, the effect of extracellular α‐Syn on microglia autophagy is poorly understood. In the present study, we reported that extracellular α‐Syn inhibited the autophagy initiation, as indicated by LC3‐II reduction and p62 protein elevation in BV2 and cultured primary microglia. The in vitro findings were verified in microglia‐enriched population isolated from α‐Syn‐overexpressing mice induced by adeno‐associated virus (AAV2/9)‐encoded wildtype human α‐Syn injection into the substantia nigra (SN). Mechanistically, α‐Syn led to microglial autophagic impairment through activating toll‐like receptor 4 (Tlr4) and its downstream p38 and Akt‐mTOR signaling because Tlr4 knockout and inhibition of p38, Akt as well as mTOR prevented α‐Syn‐induced autophagy inhibition. Moreover, inhibition of Akt reversed the mTOR activation but failed to affect p38 phosphorylation triggered by α‐Syn. Functionally, the in vivo evidence showed that lysozyme 2 Cre (Lyz2cre)‐mediated depletion of autophagy‐related gene 5 (Atg5) in microglia aggravated the neuroinflammation and dopaminergic neuron losses in the SN and exacerbated the locomotor deficit in α‐Syn‐overexpressing mice. Taken together, the results suggest that extracellular α‐Syn, via Tlr4‐dependent p38 and Akt‐mTOR signaling cascades, disrupts microglial autophagy activity which synergistically contributes to neuroinflammation and PD development.
Autophagy‐dependent and independent machinery synergistically contribute to hα‐Syn‐caused neuroinflammation in PD. The basal autophagy activity restricts microglia inflammation. Extracellular hα‐Syn interacts with and activates Tlr4, resulting in inflammatory responses, as well as autophagy suppression in microglia via Tlr4‐dependent p38 and Akt/mTOR signaling cascades. This impairs the inhibitory effect of autophagy on inflammation, and thus aggravating hα‐Syn‐induced inflammatory responses.
Our previous study has reported that the pentose phosphate pathway product nicotinamide adenine dinucleotide phosphate (NADPH) protected neurons against ischemia/reperfusion-induced brain injury. ...NADPH can either act as a co-enzyme to produce GSH or a substrate of NADPH oxidase (NOX) to generate ROS. This study was designed to elucidate the effects of co-treatment with NADPH and NOX inhibitor apocynin on ischemia/reperfusion-induced brain inflammation and neuronal injury. The results showed that both NADPH and apocynin markedly attenuated ischemia/reperfusion-induced increases in the levels of NOX2, NOX4 and ROS. NADPH and apocynin significantly inhibited the phosphorylation and degradation of IκBα, NF-κBp65 nuclear localization, and the expression of NF-κB target gene cyclooxygenase (COX2) and inducible nitric oxide synthase (iNOS). Furthermore, both NADPH and apocynin suppressed the expression of inflammasome proteins including NLRP3 ASC, caspase-1, interleukin (IL)-1β and IL-18 in the ischemic cortex as revealed by Western blot analysis and immunofluorescence. Moreover, all these effects were greatly amplified by combination of NADPH and apocynin. Both NADPH and apocynin significantly reduced infarct volume, improved post-stroke survival, and recovery of neurological functions in mouse model of stroke. Consistently, the combination of NADPH and apocynin produced greater beneficial effects in against ischemic brain damage. These studies suggest that, beyond anti-oxidative effects, NADPH may also have anti-inflammatory effects and combination of NADPH and NOX inhibitors could produce a greater neuroprotective effect in ischemic stroke.
Display omitted
•Combined NADPH and apocynin elicited greater therapeutic benefits through inhibiting NLRP3 inflammasome in stroke models.