Petroleum-based plastics are useful but they pose a great threat to the environment and human health. It is highly desirable yet challenging to develop sustainable structural materials with excellent ...mechanical and thermal properties for plastic replacement. Here, inspired by nacre's multiscale architecture, we report a simple and efficient so called "directional deforming assembly" method to manufacture high-performance structural materials with a unique combination of high strength (281 MPa), high toughness (11.5 MPa m
), high stiffness (20 GPa), low coefficient of thermal expansion (7 × 10
K
) and good thermal stability. Based on all-natural raw materials (cellulose nanofiber and mica microplatelet), the bioinspired structural material possesses better mechanical and thermal properties than petroleum-based plastics, making it a high-performance and eco-friendly alternative structural material to substitute plastics.
The lifespan of practical lithium (Li)‐metal batteries is severely hindered by the instability of Li‐metal anodes. Fluorinated solid electrolyte interphase (SEI) emerges as a promising strategy to ...improve the stability of Li‐metal anodes. The rational design of fluorinated molecules is pivotal to construct fluorinated SEI. Herein, design principles of fluorinated molecules are proposed. Fluoroalkyl (−CF2CF2−) is selected as an enriched F reservoir and the defluorination of the C−F bond is driven by leaving groups on β‐sites. An activated fluoroalkyl molecule (AFA), 2,2,3,3‐tetrafluorobutane‐1,4‐diol dinitrate is unprecedentedly proposed to render fast and complete defluorination and generate uniform fluorinated SEI on Li‐metal anodes. In Li–sulfur (Li−S) batteries under practical conditions, the fluorinated SEI constructed by AFA undergoes 183 cycles, which is three times the SEI formed by LiNO3. Furthermore, a Li−S pouch cell of 360 Wh kg−1 delivers 25 cycles with AFA. This work demonstrates rational molecular design principles of fluorinated molecules to construct fluorinated SEI for practical Li‐metal batteries.
Design principles of fluorinated molecules were proposed to construct a fluorinated solid electrolyte interphase for practical lithium‐metal batteries.
Melatonin is a pleiotropic signaling molecule that provides physiological protection against diverse environmental stresses in plants. Nonetheless, the mechanisms for melatonin‐mediated ...thermotolerance remain largely unknown. Here, we report that endogenous melatonin levels increased with a rise in ambient temperature and that peaked at 40°C. Foliar pretreatment with an optimal dose of melatonin (10 μmol/L) or the overexpression of N‐acetylserotonin methyltransferase (ASMT) gene effectively ameliorated heat‐induced photoinhibition and electrolyte leakage in tomato plants. Both exogenous melatonin treatment and endogenous melatonin manipulation by overexpression of ASMT decreased the levels of insoluble and ubiquitinated proteins, but enhanced the expression of heat‐shock proteins (HSPs) to refold denatured and unfolded proteins under heat stress. Meanwhile, melatonin also induced expression of several ATG genes and formation of autophagosomes to degrade aggregated proteins under the same stress. Proteomic profile analyses revealed that protein aggregates for a large number of biological processes accumulated in wild‐type plants. However, exogenous melatonin treatment or overexpression of ASMT reduced the accumulation of aggregated proteins. Aggregation responsive proteins such as HSP70 and Rubisco activase were preferentially accumulated and ubiquitinated in wild‐type plants under heat stress, while melatonin mitigated heat stress‐induced accumulation and ubiquitination of aggregated proteins. These results suggest that melatonin promotes cellular protein protection through induction of HSPs and autophagy to refold or degrade denatured proteins under heat stress in tomato plants.
Activation of tumor suppressors for the treatment of human cancer has been a long sought, yet elusive, strategy. PTEN is a critical tumor suppressive phosphatase that is active in its dimer ...configuration at the plasma membrane. Polyubiquitination by the ubiquitin E3 ligase WWP1 (WW domain-containing ubiquitin E3 ligase 1) suppressed the dimerization, membrane recruitment, and function of PTEN. Either genetic ablation or pharmacological inhibition of WWP1 triggered PTEN reactivation and unleashed tumor suppressive activity.
appears to be a direct MYC (MYC proto-oncogene) target gene and was critical for MYC-driven tumorigenesis. We identified indole-3-carbinol, a compound found in cruciferous vegetables, as a natural and potent WWP1 inhibitor. Thus, our findings unravel a potential therapeutic strategy for cancer prevention and treatment through PTEN reactivation.
A stretchable and multiple‐force‐sensitive electronic fabric based on stretchable coaxial sensor electrodes is fabricated for artificial‐skin application. This electronic fabric, with only one kind ...of sensor unit, can simultaneously map and quantify the mechanical stresses induced by normal pressure, lateral strain, and flexion.
Nanofibres can be fabricated by various methods and perhaps electrospinning is the most facile route. In past years, electrospinning has been used as a synthesis technique and the fibres have been ...prepared from a variety of starting materials and show various properties. Recently, incorporating functional nanoparticles (NPs) with electrospun fibres has emerged as one of most exciting research topics in the field of electrospinning. When NPs are incorporated, on the one hand the NPs endow the electrospun fibres/mats novel or better performance, on the other hand the electrospun fibres/mats could preserve the NPs from corrosion and/or oxidation, especially for NPs with anisotropic structures. More importantly, electrospinning shows potential applications in self-assembly of nanoscale building blocks for generating new functions, and has some obvious advantages that are not available by other self-assembly methods,
i.e.
, the obtained free-standing hybrid mats are usually flexible and with large area, which is favourable for their commercial applications. In this critical review, we will focus on the fabrication and applications of NPs-electrospun fibre composites and give an overview on this emerging field combining nanoparticles and electrospinning. Firstly, two main strategies for producing NPs-electrospun fibres will be discussed,
i.e.
, one is preparing the NPs-electrospun fibres after electrospinning process that is usually combined with other post-processing methods, and the other is fabricating the composite nanofibres during the electrospinning process. In particular, the NPs in the latter method will be classified and introduced to show the assembling effect of electrospinning on NPs with different anisotropic structures. The subsequent section describes the applications of these NPs-electrospun fibre mats and nanocomposites, and finally a conclusion and perspectives of the future research in this emerging field is given.
In this critical review, the latest advances on nanoparticles-electrospun fibres by post-treatment of the as-prepared electrospun fibres or directly adding nanoparticles into electrospun solution have been overviewed. The application potentials of the nanoparticle-electrospun fibre composites and the trends in this emerging field have been described.
Melatonin regulates broad aspects of plant responses to various biotic and abiotic stresses, but the upstream regulation of melatonin biosynthesis by these stresses remains largely unknown. Herein, ...we demonstrate that transcription factor heat‐shock factor A1a (HsfA1a) conferred cadmium (Cd) tolerance to tomato plants, in part through its positive role in inducing melatonin biosynthesis under Cd stress. Analysis of leaf phenotype, chlorophyll content, and photosynthetic efficiency revealed that silencing of the HsfA1a gene decreased Cd tolerance, whereas its overexpression enhanced plant tolerance to Cd. HsfA1a‐silenced plants exhibited reduced melatonin levels, and HsfA1a overexpression stimulated melatonin accumulation and the expression of the melatonin biosynthetic gene caffeic acid O‐methyltransferase 1 (COMT1) under Cd stress. Both an in vitro electrophoretic mobility shift assay and in vivo chromatin immunoprecipitation coupled with qPCR analysis revealed that HsfA1a binds to the COMT1 gene promoter. Meanwhile, Cd stress induced the expression of heat‐shock proteins (HSPs), which was compromised in HsfA1a‐silenced plants and more robustly induced in HsfA1a‐overexpressing plants under Cd stress. COMT1 silencing reduced HsfA1a‐induced Cd tolerance and melatonin accumulation in HsfA1a‐overexpressing plants. Additionally, the HsfA1a‐induced expression of HSPs was partially compromised in COMT1‐silenced wild‐type or HsfA1a‐overexpressing plants under Cd stress. These results demonstrate that HsfA1a confers Cd tolerance by activating transcription of the COMT1 gene and inducing accumulation of melatonin that partially upregulates expression of HSPs.
Hydroxide exchange membrane fuel cells offer possibility of adopting platinum-group-metal-free catalysts to negotiate sluggish oxygen reduction reaction. Unfortunately, the ultrafast hydrogen ...oxidation reaction (HOR) on platinum decreases at least two orders of magnitude by switching the electrolytes from acid to base, causing high platinum-group-metal loadings. Here we show that a nickel-molybdenum nanoalloy with tetragonal MoNi
phase can catalyze the HOR efficiently in alkaline electrolytes. The catalyst exhibits a high apparent exchange current density of 3.41 milliamperes per square centimeter and operates very stable, which is 1.4 times higher than that of state-of-the-art Pt/C catalyst. With this catalyst, we further demonstrate the capability to tolerate carbon monoxide poisoning. Marked HOR activity was also observed on similarly designed WNi
catalyst. We attribute this remarkable HOR reactivity to an alloy effect that enables optimum adsorption of hydrogen on nickel and hydroxyl on molybdenum (tungsten), which synergistically promotes the Volmer reaction.
Advanced electrolyte design is essential for building high‐energy‐density lithium (Li) batteries, and introducing anions into the Li+ solvation sheaths has been widely demonstrated as a promising ...strategy. However, a fundamental understanding of the critical role of anions in such electrolytes is very lacking. Herein, the anionic chemistry in regulating the electrolyte structure and stability is probed by combining computational and experimental approaches. Based on a comprehensive analysis of the lowest unoccupied molecular orbitals, the solvents and anions in Li+ solvation sheaths exhibit enhanced and decreased reductive stability compared with free counterparts, respectively, which agrees with both calculated and experimental results of reduction potentials. Accordingly, new strategies are proposed to build stable electrolytes based on the established anionic chemistry. This work unveils the mysterious anionic chemistry in regulating the structure–function relationship of electrolytes and contributes to a rational design of advanced electrolytes for practical Li metal batteries.
The participation of anions in the solvation sheath of lithium ions promotes the reductive stability of solvents. Simultaneously, anions themselves tend to get reduced more easily and induce the formation of inorganic‐rich solid electrolyte interphase, which is beneficial to stabilizing lithium metal anodes.
Various methods have been exploited to replicate nacre features into artificial structural materials with impressive structural and mechanical similarity. However, it is still very challenging to ...produce nacre-mimetics in three-dimensional bulk form, especially for further scale-up. Herein, we demonstrate that large-sized, three-dimensional bulk artificial nacre with comprehensive mimicry of the hierarchical structures and the toughening mechanisms of natural nacre can be facilely fabricated via a bottom-up assembly process based on laminating pre-fabricated two-dimensional nacre-mimetic films. By optimizing the hierarchical architecture from molecular level to macroscopic level, the mechanical performance of the artificial nacre is superior to that of natural nacre and many engineering materials. This bottom-up strategy has no size restriction or fundamental barrier for further scale-up, and can be easily extended to other material systems, opening an avenue for mass production of high-performance bulk nacre-mimetic structural materials in an efficient and cost-effective way for practical applications.Artificial materials that replicate the mechanical properties of nacre represent important structural materials, but are difficult to produce in bulk. Here, the authors exploit the bottom-up assembly of 2D nacre-mimetic films to fabricate 3D bulk artificial nacre with an optimized architecture and excellent mechanical properties.
PDF
