With the aim of gathering temporal trends on bacterial epidemiology and resistance from multiple laboratories in China, the CHINET surveillance system was organized in 2005. Antimicrobial ...susceptibility testing was carried out according to a unified protocol using the Kirby-Bauer method or automated systems. Results were analyzed according to Clinical and Laboratory Standards Institute (CLSI) 2014 definitions. Between 2005 and 2014, the number of bacterial isolates ranged between 22 774 and 84 572 annually. Rates of extended-spectrum β-lactamase production among Escherichia coli isolates were stable, between 51.7 and 55.8%. Resistance of E. coli and Klebsiella pneumoniae to amikacin, ciprofloxacin, piperacillin/tazobactam and cefoperazone/sulbactam decreased with time. Carbapenem resistance among K. pneumoniae isolates increased from 2.4 to 13.4%. Resistance of Pseudomonas aeruginosa strains against all of antimicrobial agents tested including imipenem and meropenem decreased with time. On the contrary, resistance of Acinetobacter baumannii strains to carbapenems increased from 31 to 66.7%. A marked decrease of methicillin resistance from 69% in 2005 to 44.6% in 2014 was observed for Staphylococcus aureus. Carbapenem resistance rates in K. pneumoniae and A. baumannii in China are high. Our results indicate the importance of bacterial surveillance studies.
With the arising of global climate change and resource shortage, in recent years, increased attention has been paid to environmentally friendly materials. Trees are sustainable and renewable ...materials, which give us shelter and oxygen and remove carbon dioxide from the atmosphere. Trees are a primary resource that human society depends upon every day, for example, homes, heating, furniture, and aircraft. Wood from trees gives us paper, cardboard, and medical supplies, thus impacting our homes, school, work, and play. All of the above-mentioned applications have been well developed over the past thousands of years. However, trees and wood have much more to offer us as advanced materials, impacting emerging high-tech fields, such as bioengineering, flexible electronics, and clean energy. Wood naturally has a hierarchical structure, composed of well-oriented microfibers and tracheids for water, ion, and oxygen transportation during metabolism. At higher magnification, the walls of fiber cells have an interesting morphologya distinctly mesoporous structure. Moreover, the walls of fiber cells are composed of thousands of fibers (or macrofibrils) oriented in a similar angle. Nanofibrils and nanocrystals can be further liberated from macrofibrils by mechanical, chemical, and enzymatic methods. The obtained nanocellulose has unique optical, mechanical, and barrier properties and is an excellent candidate for chemical modification and reconfiguration. Wood is naturally a composite material, comprised of cellulose, hemicellulose, and lignin. Wood is sustainable, earth abundant, strong, biodegradable, biocompatible, and chemically accessible for modification; more importantly, multiscale natural fibers from wood have unique optical properties applicable to different kinds of optoelectronics and photonic devices. Today, the materials derived from wood are ready to be explored for applications in new technology areas, such as electronics, biomedical devices, and energy. The goal of this study is to review the fundamental structures and chemistries of wood and wood-derived materials, which are essential for a wide range of existing and new enabling technologies. The scope of the review covers multiscale materials and assemblies of cellulose, hemicellulose, and lignin as well as other biomaterials derived from wood, in regard to their major emerging applications. Structure–properties–application relationships will be investigated in detail. Understanding the fundamental properties of these structures is crucial for designing and manufacturing products for emerging applications. Today, a more holistic understanding of the interplay between the structure, chemistry, and performance of wood and wood-derived materials is advancing historical applications of these materials. This new level of understanding also enables a myriad of new and exciting applications, which motivate this review. There are excellent reviews already on the classical topic of woody materials, and some recent reviews also cover new understanding of these materials as well as potential applications. This review will focus on the uniqueness of woody materials for three critical applications: green electronics, biological devices, and energy storage and bioenergy.
Fast radio bursts (FRBs) are millisecond-duration radio transients
of unknown origin. Two possible mechanisms that could generate extremely coherent emission from FRBs invoke neutron star ...magnetospheres
or relativistic shocks far from the central energy source
. Detailed polarization observations may help us to understand the emission mechanism. However, the available FRB polarization data have been perplexing, because they show a host of polarimetric properties, including either a constant polarization angle during each burst for some repeaters
or variable polarization angles in some other apparently one-off events
. Here we report observations of 15 bursts from FRB 180301 and find various polarization angle swings in seven of them. The diversity of the polarization angle features of these bursts is consistent with a magnetospheric origin of the radio emission, and disfavours the radiation models invoking relativistic shocks.
The aim of this study was to develop a widely accepted prognostic nomogram for extranodal NK/T-cell lymphoma, nasal-type (NKTCL). The clinical data from 1383 patients with NKTCL treated at 10 ...participating institutions between 2000 and 2011 were reviewed. A nomogram was developed that predicted overall survival (OS) based on the Cox proportional hazards model. To contrast the utility of the nomogram against the widely used Ann Arbor staging system, the International Prognostic Index (IPI) and the Korean Prognostic Index (KPI), we used the concordance index (C-index) and a calibration curve to determine its predictive and discriminatory capacity. The 5-year OS rate was 60.3% for the entire group. The nomogram included five important variables based on a multivariate analysis of the primary cohort: stage; age; Eastern Cooperative Oncology Group performance status; lactate dehydrogenase; and primary tumor invasion. The calibration curve showed that the nomogram was able to predict 5-year OS accurately. The C-index of the nomogram for OS prediction was 0.72 for both cohorts, which was superior to the predictive power (range, 0.56-0.64) of the Ann Arbor stage, IPI and KPI in the primary and validation cohorts. The proposed nomogram provides an individualized risk estimate of OS in patients with NKTCL.
Synthetic structural materials with exceptional mechanical performance suffer from either large weight and adverse environmental impact (for example, steels and alloys) or complex manufacturing ...processes and thus high cost (for example, polymer-based and biomimetic composites). Natural wood is a low-cost and abundant material and has been used for millennia as a structural material for building and furniture construction. However, the mechanical performance of natural wood (its strength and toughness) is unsatisfactory for many advanced engineering structures and applications. Pre-treatment with steam, heat, ammonia or cold rolling followed by densification has led to the enhanced mechanical performance of natural wood. However, the existing methods result in incomplete densification and lack dimensional stability, particularly in response to humid environments, and wood treated in these ways can expand and weaken. Here we report a simple and effective strategy to transform bulk natural wood directly into a high-performance structural material with a more than tenfold increase in strength, toughness and ballistic resistance and with greater dimensional stability. Our two-step process involves the partial removal of lignin and hemicellulose from the natural wood via a boiling process in an aqueous mixture of NaOH and Na
SO
followed by hot-pressing, leading to the total collapse of cell walls and the complete densification of the natural wood with highly aligned cellulose nanofibres. This strategy is shown to be universally effective for various species of wood. Our processed wood has a specific strength higher than that of most structural metals and alloys, making it a low-cost, high-performance, lightweight alternative.
Here we report the production of highly thermal stable and functional cellulose nanocrystals (CNC) and nanofibrils (CNF) by hydrolysis using concentrated organic acids. Due to their low water ...solubility, these solid organic acids can be easily recovered after hydrolysis reactions through crystallization at a lower or ambient temperature. When dicarboxylic acids were used, the resultant CNC surface contained carboxylic acid groups which facilitate functionalization and dispersion in aqueous processing. The carboxylic acid group content was 0.1-0.4 mmol g super(-1) for CNC produced from a bleached eucalyptus kraft pulp (BEP) using oxalic acid at concentrations of 50-70 wt%. The onset thermal degradation temperature for the CNC was increased to 322 degree C from 274 degree C for the feed BEP fibers, compared with 218 degree C for CNC produced from the same feed fibers using conventional concentrated sulfuric acid hydrolysis. The low strength (high pK sub(a)) of organic acids also resulted in CNC with longer lengths of approximately 275-380 nm and higher crystallinity than those produced using mineral acids. Fibrous cellulosic solid residue (FCSR) collected from acid hydrolysis was an excellent feedstock for producing CNF through subsequent mechanical fibrillation with low energy input. The ability to recover organic acids using a conventional and commercially proven crystallization method makes these organic acids uniquely suitable for sustainable and green production of cellulose nanomaterials. The resultant CNC and CNF with high thermal stability and a large aspect ratio are excellent for bio-composite applications.
•Integrated production of carboxylated lignocellulosic nanocrystals and nanofibrils.•Thermal stable and hydrophobic lignin containing cellulose nanomaterials.•Lignin facilitated fibrillation and ...improved aspect ratio of lignocellulosic nanofibrils.
Here we demonstrate di-carboxylic acid hydrolysis for the integrated production of lignin containing cellulose nanocrystals (LCNC) and nanofibrils (LCNF) using two unbleached mixed hardwood chemical pulps of lignin contents of 3.9 and 17.2%. Acid hydrolysis experiments used maleic acid solution of 60wt% concentration at 120°C for 120min under ambient pressure. Yields of LCNC were low of less than 6% under this set of conditions. The higher lignin content sample produced LCNC with greater height (diameter) of 25nm but similar length of approximately 230nm to that from the lower lignin content fibers (height of 20nm). Interestingly, the higher lignin content sample resulted in LCNF with smaller height (diameter) of 7nm but longer length of >1μm, or greater aspect ratio than the LCNF from the lower lignin fibers of height 10nm and length <1μm. Lignin protected cellulose from esterification which resulted in LCNC and LCNF that was less carboxylated compared to those lignin-free CNC and CNF and therefore had lower charges. However, lignin is more hydrophobic and thermally stable than carbohydrates therefore LCNC and LCNF are favorable for composite applications.
We report the first results of a light weakly interacting massive particles (WIMPs) search from the CDEX-10 experiment with a 10 kg germanium detector array immersed in liquid nitrogen at the China ...Jinping Underground Laboratory with a physics data size of 102.8 kg day. At an analysis threshold of 160 eVee, improved limits of 8×10^{-42} and 3×10^{-36} cm^{2} at a 90% confidence level on spin-independent and spin-dependent WIMP-nucleon cross sections, respectively, at a WIMP mass (m_{χ}) of 5 GeV/c^{2} are achieved. The lower reach of m_{χ} is extended to 2 GeV/c^{2}.
Cellulose nanocrytals (CNCs) are predominantly produced using the traditional strong acid hydrolysis process. In most reported studies, the typical CNC yield is low (approximately 30%) despite ...process optimization. This study investigated the hydrolysis of a bleached kraft eucalyptus pulp using sulfuric acid between 50 and 64 wt % at temperatures of 35–80 °C over time periods of up to 240 min for the production of CNCs. The experimental design captured the feature of the coexistence of a variety of reaction products, such as CNC, cellulosic solid residue (CSR), glucose, and xylose, in the product stream for accurate kinetic modeling to improve the CNC production yield. The kinetic model describing the solubilization of cellulose fibers used three phenomenological reactions, namely, hydrolysis of xylan to form xylose, depolymerization of cellulose to CNCs, and hydrolysis of cellulose to form glucose, each of which can be described by pseudohomogenous first-order kinetics. The concept of “degrees of hydrolyzable xylan or cellulose” to reflect the inhomogeneity of xylan or cellulose in hydrolysis was incorporated into the kinetic modeling to improve model accuracy. The developed model showed excellent predictability for CNC production. Both the experimental data and the model clearly indicate that CNC production was limited by cellulose depolymerization at low acid concentrations of below 58 wt %, but controlled by CNC degradation when the acid concentration was higher than 58 wt %. This work for the first time provides the most plausible description of CNC production kinetics, which is significant for the commercial production of CNCs.
State of the Art on Neural Rendering Tewari, A.; Fried, O.; Thies, J. ...
Computer graphics forum,
20/May , Letnik:
39, Številka:
2
Journal Article
Recenzirano
Odprti dostop
Efficient rendering of photo‐realistic virtual worlds is a long standing effort of computer graphics. Modern graphics techniques have succeeded in synthesizing photo‐realistic images from ...hand‐crafted scene representations. However, the automatic generation of shape, materials, lighting, and other aspects of scenes remains a challenging problem that, if solved, would make photo‐realistic computer graphics more widely accessible. Concurrently, progress in computer vision and machine learning have given rise to a new approach to image synthesis and editing, namely deep generative models. Neural rendering is a new and rapidly emerging field that combines generative machine learning techniques with physical knowledge from computer graphics, e.g., by the integration of differentiable rendering into network training. With a plethora of applications in computer graphics and vision, neural rendering is poised to become a new area in the graphics community, yet no survey of this emerging field exists. This state‐of‐the‐art report summarizes the recent trends and applications of neural rendering. We focus on approaches that combine classic computer graphics techniques with deep generative models to obtain controllable and photorealistic outputs. Starting with an overview of the underlying computer graphics and machine learning concepts, we discuss critical aspects of neural rendering approaches. Specifically, our emphasis is on the type of control, i.e., how the control is provided, which parts of the pipeline are learned, explicit vs. implicit control, generalization, and stochastic vs. deterministic synthesis. The second half of this state‐of‐the‐art report is focused on the many important use cases for the described algorithms such as novel view synthesis, semantic photo manipulation, facial and body reenactment, relighting, free‐viewpoint video, and the creation of photo‐realistic avatars for virtual and augmented reality telepresence. Finally, we conclude with a discussion of the social implications of such technology and investigate open research problems.
PDF
