Development of a new 2-inch hybrid photo-detector using MPPC Fukasawa, A.; Hotta, Y.; Ishizu, T. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2018, Letnik:
912
Journal Article
Recenzirano
We have newly developed a Hybrid Photo-Detector (HPD) with 2-inch diameter. It consists of a bialkali photocathode and a 3 mm x 3 mm Multi-Pixel-Photon Counter (MPPC) sealed in a glass tube. The ...electric field inside the tube is designed so that photoelectrons emitted from the photocathode are collected in the MPPC, where photoelectrons are amplified. For conventional HPDs with an avalanche diode, extremely high voltage such as -8kV has to be provided to achieve gain sufficient for single photon detection. However, our HPD with MPPC has single photon sensitivity only with lower voltage like PMTs due to high gain of MPPC. In addition, this device can cover larger area with only one MPPC. These features enable us to easily handle high performance HPD in various applications, such as high energy physics, biomedical field etc. This test sample was produced in 2016, and we have checked its basic characteristics. The peak photocathode quantum efficiency was found to be very high of 37% at the wavelength of 340 nm. We have confirmed that HPD with MPPC has capability of single photon detection in low operation voltage less than -2 kV. This report will present detailed performance studies of this sample.
•A HPD with 2-inch diameter has been developed.•The peak photocathode quantum efficiency was found to be very high.•Capability of single photon detection in -1.5kV operation was confirmed.
Abstract
Crystal Eye idea comes from the analysis of two gravitational waves events: GW170817 and GW190425. Both events were referred to neutron star mergers. In the first case Fermi-GBM and INTEGRAL ...claimed the detection of a short Gamma Ray Burst (GRB 170817A) and in order to follow up and target the GW electromagnetic counterparts, a huge effort has been made by other satellites and ground-based experiments. In the second case, only INTEGRAL claimed the detection of a faint GRB (GRB 190425) while Fermi satellite was in Earth occultation. Crystal Eye is a space-based X and γ ray all-sky monitor sensitive in the 10 keV - 30 MeV energy range. In its baseline configuration, it consists of a hemisphere, made by 112 pixels, with a wide (about 6 sr) field of view (FOV), a full sky coverage and a very large effective area (6 times Fermi-GBM at 1 MeV) in the energy range of interest. Given the pixel structure – a two-layer crystal scintillator and a plastic scintillator veto layer – and the hemispherical design, Crystal Eye concentrate the pointing capability of a γ-ray telescope and the sky coverage of an all-sky monitor in a single detector. Moreover, the use of Silicon Photomultiplier (SiPM) at the place of traditional PMs, besides being a challenge for their qualification for space missions, allows a more compact and less power-consuming design. A Crystal Eye pathfinder has been designed and realized to be tested in view of the mission on the Space Rider by ESA. The prototype is made by 4 pixels. The mission is aimed at testing in the space environment the LYSO crystals, the MPPC-arrays and the DAQ board.
An advantageous micromechanical technique to deposit large area graphene nanoplatelet (GNP) thin films on a low-density polyethylene substrate is proposed. This method is based on the application of ...shear-stress and friction forces to a graphite platelets/ethanol paste on the surface of a polymeric substrate; it allows us to obtain a continuous film of superimposed nanoplatelets mainly made of 13-30 graphene layers. X-ray diffraction (XRD), atomic force and transmission electron microscopy (TEM) measurements support the occurrence of a partial exfoliation of the graphite platelets due to shear-stress and friction forces applied during film formation. Scanning electron microscopy (SEM) observations point out that the surface of the polymer is uniformly coated by the overlap of GNPs, and TEM analysis reveals the tendency of the nanoplatelets to align parallel to the interface plane. It has been found that the deposited samples, under white light illumination, exhibit a negative photoconductivity and a linear photoresponse as a function of the applied voltage and the optical power density in the −120 120 mV and 20.9 286.2 mW cm−2 ranges, respectively.
Abstract
Current generation of detectors using noble gases in liquid phase for direct dark matter search and neutrino physics need large area photosensors. Silicon based photo-detectors are ...innovative light collecting devices and represent a successful technology in these research fields. The DarkSide collaboration started a dedicated development and customization of SiPM technology for its specific needs resulting in the design, production and assembly of large surface modules of 20 × 20 cm
2
named Photo Detection Unit for the DarkSide-20k experiment. Production of a large number of such devices, as needed to cover about 20 m
2
of active surface inside the DarkSide-20k detector, requires a robust testing and validation process. In order to match this requirement a dedicated test facility for photosensors was designed and commissioned at INFN-Naples laboratory. The first commissioning test was successfully performed in 2021. Since then a number of testing campaigns were performed. Detailed description of the facility is reported as well as results of some tests.
The Vacuum Silicon PhotoMultiplier Tube (VSiPMT) is an innovative design we propose for a modern hybrid photodetector based on the combination of a Silicon PhotoMultiplier (SiPM) with a hemispherical ...vacuum glass PMT standard envelope. The basic idea is to replace the classical dynode chain of a PMT with a SiPM, which acts as an electron multiplying detector. Such a solution will match the goal of a large photocathode sensitive area with the performances of a SiPM. This will lead to many advantages such as lower power consumption, mild sensitivity to magnetic fields and high quantum efficiency. The feasibility of this idea has been throughly studied both from a theoretical and experimental point of view. As a first step we performed the full characterization of a special non-windowed Hamamatsu MPPC with a laser source. The response of the SiPM to an electron beam was studied as a function of the energy and of the incident angle by means of a Geant4-based simulation. In this paper we present the preliminary results of the characterization of the SiPM with an electron source and we discuss how the development of next generation SiPMs will overcome the main weaknesses of VSiPMT, such as relatively low PDE and high photocathode voltage.
The 2-inches VSiPMT industrial prototypes Barbato, F.C.T.; Barbarino, G.; Rosa, G. De ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
04/2020, Letnik:
958
Journal Article
Recenzirano
Photon detection is a key factor to study many physical processes in several areas of fundamental physics research. Focusing the attention on photodetectors for particle astrophysics, we understand ...that we are very close to new discoveries and new results. In order to push the progress in the study of very high-energy or extremely rare phenomena (e.g. dark matter, proton decay, neutrinos from astrophysical sources) the current and future experiments require additional improvements in linearity, gain, quantum efficiency and single photon counting capability. To meet the requirements of these classes of experiments, we propose a new design for a modern hybrid photodetector: the VSiPMT (Vacuum Silicon PhotoMultiplier Tube).
The idea is to replace the classical dynode chain of a PMT with a SiPM, which therefore acts as a single stage Geiger electron detector and amplifier, without statistical fluctuations. The aim is to match the large sensitive area of a photocathode with the performances of the SiPM technology. The previous VSiPMT prototypes already showed many attractive features such as low power consumption, very large dynamic range, excellent photon counting capability and low voltage driven gain.
We now present the results of the full characterization of the latest and largest version achieved up to now, a 2-inches VSiPMT manufactured by Hamamatsu.
•The VSiPMT is a new high gain photodetector with very good photon counting capability.•Inches prototypes have been realized in collaboration with Hamamatsu.•The prototypes have been tested with very good results.•The prototypes will be tested in a little experiment to compare their answer with both a matrix of SiPMs both a PMT.
VSiPMT a new photon detector Di Capua, F.; Barbarino, G.; Barbato, F.C.T. ...
EPJ Web of Conferences,
01/2016, Letnik:
116
Journal Article, Conference Proceeding
Recenzirano
Odprti dostop
Photon detection is a key factor to study many physical processes in several areas of fundamental physics research. Focusing the attention on photodetectors for particle astrophysics, the future ...experiments aimed at the study of very high-energy or extremely rare phenomena (e.g. dark matter, proton decay, neutrinos from astrophysical sources) will require additional improvements in linearity, gain, quantum efficiency and single photon counting capability. To meet the requirements of these class of experiments, we propose a new design for a modern hybrid photodetector: the VSiPMT (Vacuum Silicon PhotoMultiplier Tube). The idea is to replace the classical dynode chain of a PMT with a SiPM, which therefore acts as an electron detector and amplifier. The aim is to match the large sensitive area of a photocathode with the performances of the SiPM technology.
The VSiPMT (Vacuum Silicon PhotoMultiplier Tube) is an innovative design we proposed for a revolutionary photon detector. The main idea is to replace the classical dynode chain of a PMT with a SiPM ...(G-APD), the latter acting as an electron detector and amplifier. The aim is to match the large sensitive area of a photocathode with the performance of the SiPM technology. The VSiPMT has many attractive features. In particular, a low power consumption and an excellent photon counting capability. To prove the feasibility of the idea we first tested the performance of a special non-windowed SiPM by Hamamatsu (MPPC) as electron detector and current amplifier. Thanks to this result Hamamatsu realized two VSiPMT industrial prototypes. In this work, we present the results of a full characterization of the VSiPMT prototype.
In the last 50 years solid state devices have been widely used as radiation detectors (photons, betas, fast electrons and heavy ions) thanks to the advantages they offer with respect to ...photomultiplier tubes technology. However, despite their benefits (low power consumption, small size, low costs), semiconductors are very sensitive to temperature variations. This means that for those experiments using solid state detectors without any thermal control, the correct operation of the detectors is affected by the environmental condition. To solve this problem Hamamatsu Photonics realized the C11204-01 device: a special voltage supply module for silicon photomultipliers which compensates the overvoltage at different temperatures. In the following work we present the results of the calibration of this device and a test we performed on a silicon photomultiplier, by means of a LabVIEWTM interface designed ad hoc for this purpose.
PDF
