By employing new electrolytes, the polysulfide shuttle phenomenon, one of the main problems of lithium–sulfur (Li–S) batteries, can be significantly reduced. Here we present excellent Coulombic ...efficiencies as well as adequate performance of high-energy Li–S cells by the use of a fluorinated ether (TFEE) based electrolyte at low electrolyte loading. The observed altered discharge profile was investigated both by electrochemical experiments and an especially tailored COSMO-RS computational approach, while the details of the discharge mechanism were elucidated by two operando techniques: XANES and UV–vis spectroscopy. A significant decrease of polysulfide solubility compared to tetraglyme is due to different Li+ solvation mode.
Iridium-based particles, regarded as the most promising proton exchange membrane electrolyzer electrocatalysts, were investigated by transmission electron microscopy and by coupling of an ...electrochemical flow cell (EFC) with online inductively coupled plasma mass spectrometry. Additionally, studies using a thin-film rotating disc electrode, identical location transmission and scanning electron microscopy, as well as X-ray absorption spectroscopy have been performed. Extremely sensitive online time-and potential-resolved electrochemical dissolution profiles revealed that Ir particles dissolve well below oxygen evolution reaction (OER) potentials, presumably induced by Ir surface oxidation and reduction processes, also referred to as transient dissolution. Overall, thermally prepared rutile-type IrO2 particles are substantially more stable and less active in comparison to as-prepared metallic and electrochemically pretreated (E-Ir) analogues. Interestingly, under OER-relevant conditions, E-Ir particles exhibit superior stability and activity owing to the altered corrosion mechanism, where the formation of unstable Ir(>IV) species is hindered. Due to the enhanced and lasting OER performance, electrochemically pre-oxidized E-Ir particles may be considered as the electrocatalyst of choice for an improved low-temperature electrochemical hydrogen production device, namely a proton exchange membrane electrolyzer.
Magnesium–sulfur batteries are considered as attractive energy-storage devices due to the abundance of electrochemically active materials and high theoretical energy density. Here we report the ...mechanism of a Mg–S battery operation, which was studied in the presence of simple and commercially available salts dissolved in a mixture of glymes. The electrolyte offers high sulfur conversion into MgS in the first discharge with low polarization. The electrochemical conversion of sulfur with magnesium proceeds through two well-defined plateaus, which correspond to the equilibrium between sulfur and polysulfides (high-voltage plateau) and polysulfides and MgS (low-voltage plateau). As shown by XANES, RIXS (resonant inelastic X-ray scattering), and NMR studies, the end discharge phase involves MgS with Mg atoms in a tetrahedral environment resembling the wurtzite structure, while chemically synthesized MgS crystallizes in the rock-salt structure with octahedral coordination of magnesium.
Combining the abundance and inexpensiveness of their constituent elements with their atomic dispersion, atomically dispersed Fe–N–C catalysts represent the most promising alternative to ...precious-metal-based materials in proton exchange membrane (PEM) fuel cells. Due to the high temperatures involved in their synthesis and the sensitivity of Fe ions toward carbothermal reduction, current synthetic methods are intrinsically limited in type and amount of the desired, catalytically active Fe–N4 sites, and high active site densities have been out of reach (dilemma of Fe–N–C catalysts). We herein identify a paradigm change in the synthesis of Fe–N–C catalysts arising from the developments of other M–N–C single-atom catalysts. Supported by DFT calculations we propose fundamental principles for the synthesis of M–N–C materials. We further exploit the proposed principles in a novel synthetic strategy to surpass the dilemma of Fe–N–C catalysts. The selective formation of tetrapyrrolic Zn–N4 sites in a tailor-made Zn–N–C material is utilized as an active-site imprint for the preparation of a corresponding Fe–N–C catalyst. By successive low- and high-temperature ion exchange reactions, we obtain a phase-pure Fe–N–C catalyst, with a high loading of atomically dispersed Fe (>3 wt %). Moreover, the catalyst is entirely composed of tetrapyrrolic Fe–N4 sites. The density of tetrapyrrolic Fe–N4 sites is more than six times as high as for previously reported tetrapyrrolic single-site Fe–N–C fuel cell catalysts.
We used cathodoluminescence (CL) spectroscopy to characterize the oxygen vacancies (VO) in ceria (CeO2). The effects of the processing atmosphere and thermal quenching temperature on the nature and ...distribution of the intrinsic defects and on the spectroscopic behavior were investigated. The presence of polarons and associates of the polarons with the oxygen vacancies such as (VO ••–CeCe ′)• is demonstrated. CL intensity quenching above a critical concentration of VO has been shown. Even though the emission centers in all samples are the same, their concentration changes with the oxygen partial pressure of the processing atmosphere. Deconvolution of the observed CL spectra shows that the emissions originating from the F0 centers prevail over those of F+ centers of VO when the defect concentration is high.
Technologies for mass production require cheap and abundant materials such as ferrous chloride (FeCl2). The literature survey shows the lack of experimental studies to validate theoretical ...conclusions related to the population of ionic Fe-species in the aqueous FeCl2 solution. Here, we present an in situ X-ray absorption study of the structure of the ionic species in the FeCl2 aqueous solution at different concentrations (1–4 molL−1) and temperatures (25–80 °C). We found that at low temperature and low FeCl2 concentration, the octahedral first coordination sphere around Fe is occupied by one Cl ion at a distance of 2.33 (±0.02) Å and five water molecules at a distance of 2.095 (±0.005) Å. The structure of the ionic complex gradually changes with an increase in temperature and/or concentration. The apical water molecule is substituted by a chlorine ion to yield a neutral FeCl2(H2O)40. The observed substitutional mechanism is facilitated by the presence of the intramolecular hydrogen bonds as well as entropic reasons. The transition from the single charged FeCl(H2O)5+ to the neutral FeCl2(H2O)40 causes a significant drop in the solution conductivity, which well correlates with the existing conductivity models.
Dry reforming of methane (DRM) is a promising way to convert methane and carbon dioxide into H2 and CO (syngas). CeO2 nanorods, nanocubes, and nanospheres were decorated with 1–4 wt % Ni. The ...materials were structurally characterized using TEM and in situ XANES/EXAFS. The CO2 activation was analyzed by DFT and temperature-programmed techniques combined with MS-DRIFTS. Synthesized CeO2 morphologies expose {111} and {100} terminating facets, varying the strength of the CO2 interaction and redox properties, which influence the CO2 activation. Temperature-programmed CO2 DRIFTS analysis revealed that under hydrogen-lean conditions mono- and bidentate carbonates are hydrogenated to formate intermediates, which decompose to H2O and CO. In excess hydrogen, methane is the preferred reaction product. The CeO2 cubes favor the formation of a polydentate carbonate species, which is an inert spectator during DRM at 500 °C. Polydentate covers a considerable fraction of ceria’s surface, resulting in less-abundant surface sites for CO2 dissociation.
Calcium batteries represent a promising alternative to lithium metal systems. The combination of the low redox potential and low cost and the energy-dense calcium anode (2073 mAh/cm3, similar to 2044 ...mAh/cm3 for Li) with appropriate low-cost cathode materials such as sulfur could produce a game-changing technology in several fields of applications. In this work, we present the reversible activity of a proof-of-concept Ca/S battery at room temperature, characterized by a surprising medium-term cycling stability with low polarization, promoted by the use of a simple positive electrode made of sulfur supported on an activated carbon cloth scaffold, and a state-of-the-art fluorinated alkoxyborate-based electrolyte. Insights into the electrochemical mechanism governing the chemistry of the Ca/S system were obtained for the first time by combining X-ray photoelectron spectroscopy and X-ray absorption spectroscopy. The mechanism implies the formation of different types of soluble polysulfide species during both charge and discharge at room temperature, and the formation of solid CaS at the end of discharge. The reversible electrochemical activity is proven by the reformation of elemental sulfur at the end of the following charge. These promising results open the way to the comprehension of emerging Ca/S systems, which may represent a valid alternative to Mg/S and Li/S batteries.
X-ray absorption spectroscopy is a synchrotron radiation based technique that is able to provide information on both local structure and electronic properties in a chemically selective manner. It can ...be used to characterize the dynamic processes that govern the electrochemical energy storage in batteries, and to shed light on the redox chemistry and changes in structure during galvanostatic cycling to design cathode materials with improved properties. Operando XAS studies have been performed at beamline XAFS at Elettra on different systems. For Li-ion batteries, a multiedge approach revealed the role of the different cathode components during the charge and discharge of the battery. In addition, Li-S batteries for automotive applications were studied. Operando sulfur K-edge XANES and EXAFS analysis was used to characterize the redox chemistry of sulfur, and to relate the electrochemical mechanism to its local structure.
Display omitted
•New Sn-modified TiO2 photocatalysts are prepared by low-temperature sol-gel processing.•Sn cations promote the formation of TiO2 rutile crystalline phase at low-temperature ...processing.•Optimal ratio between anatase and rutile (nano)crystals is obtained by adding low Sn concentration to achieve improved photocatalytic activity of the films.
The Sn-modified TiO2 photocatalysts are prepared by low-temperature sol-gel processing based on organic titanium and tin precursors with varied Sn concentrations (from 0.1–20 mol .%). The role of Sn dopant as the promotor of the formation of TiO2 rutile crystalline phase is explained and the optimal Sn concentration for preparation of efficient Sn-modified titania photocatalyst is determined. Up to 40 % increase in photocatalytic activity is achieved in Sn-modified TiO2 photocatalytic thin films dried at 150 °C with low Sn concentrations in the range from 0.1 to 1 mol .%. At low Sn concentrations optimal ratio between anatase and rutile (nano)crystals is obtained, which facilitates charge separation at the TiO2 photocatalyst’s surface. When the concentration of Sn increases above 5 mol.% or when the films are calcined at 500 °C, the relative amount of rutile phase with inferior photocatalytic activity, increases and the nanocrystals of titania grow, leading to fewer active sites per unit mass and the reduction of activity in comparison to unmodified TiO2.