Amorphous calcium carbonate (ACC) is a metastable phase often observed during low temperature inorganic synthesis and biomineralization. ACC transforms with aging or heating into a less hydrated ...form, and with time crystallizes to calcite or aragonite. The energetics of transformation and crystallization of synthetic and biogenic (extracted from California purple sea urchin larval spicules, Strongylocentrotus purpuratus) ACC were studied using isothermal acid solution calorimetry and differential scanning calorimetry. Transformation and crystallization of ACC can follow an energetically downhill sequence: more metastable hydrated ACC → less metastable hydrated ACC ⇒ anhydrous ACC ∼ biogenic anhydrous ACC ⇒ vaterite → aragonite → calcite. In a given reaction sequence, not all these phases need to occur. The transformations involve a series of ordering, dehydration, and crystallization processes, each lowering the enthalpy (and free energy) of the system, with crystallization of the dehydrated amorphous material lowering the enthalpy the most. ACC is much more metastable with respect to calcite than the crystalline polymorphs vaterite or aragonite. The anhydrous ACC is less metastable than the hydrated, implying that the structural reorganization during dehydration is exothermic and irreversible. Dehydrated synthetic and anhydrous biogenic ACC are similar in enthalpy. The transformation sequence observed in biomineralization could be mainly energetically driven; the first phase deposited is hydrated ACC, which then converts to anhydrous ACC, and finally crystallizes to calcite. The initial formation of ACC may be a first step in the precipitation of calcite under a wide variety of conditions, including geological CO₂ sequestration.
Ocean warming and acidification threaten the future growth of coral reefs. This is because the calcifying coral reef taxa that construct the calcium carbonate frameworks and cement the reef together ...are highly sensitive to ocean warming and acidification. However, the global-scale effects of ocean warming and acidification on rates of coral reef net carbonate production remain poorly constrained despite a wealth of studies assessing their effects on the calcification of individual organisms. Here, we present global estimates of projected future changes in coral reef net carbonate production under ocean warming and acidification. We apply a meta-analysis of responses of coral reef taxa calcification and bioerosion rates to predicted changes in coral cover driven by climate change to estimate the net carbonate production rates of 183 reefs worldwide by 2050 and 2100. We forecast mean global reef net carbonate production under representative concentration pathways (RCP) 2.6, 4.5, and 8.5 will decline by 76, 149, and 156%, respectively, by 2100. While 63% of reefs are projected to continue to accrete by 2100 under RCP2.6, 94% will be eroding by 2050 under RCP8.5, and no reefs will continue to accrete at rates matching projected sea level rise under RCP4.5 or 8.5 by 2100. Projected reduced coral cover due to bleaching events predominately drives these declines rather than the direct physiological impacts of ocean warming and acidification on calcification or bioerosion. Presently degraded reefs were also more sensitive in our analysis. These findings highlight the low likelihood that the world's coral reefs will maintain their functional roles without near-term stabilization of atmospheric CO
emissions.
Phagocytosis is a physiological process used by immune cells such as macrophages to actively ingest and destroy foreign pathogens and particles. It is the cellular process that leads to the failure ...of drug delivery carriers because the drug carriers are cleared by immune cells before reaching their target. Therefore, clarifying the mechanism of particle phagocytosis would have a significant implication for both fundamental understanding and biomedical engineering. As far as we know, the effect of particle shape on biological response has not been fully investigated. In the present study, we investigated the particle shape-dependent cellular uptake and biological response of differentiated THP-1 macrophages by using calcium carbonate (CaCO3)-based particles as a model. Transmission electron microscopy analysis revealed that the high uptake of needle-shaped CaCO3 particles by THP-1 macrophages because of their high phagocytic activity. In addition, the THP-1 macrophages exposed to needle-shaped CaCO3 accumulated a large amount of calcium in the intracellular matrix. The enhanced release of interleukin-8 (IL-8) and tumor necrosis factor-alpha (TNF-α) by the THP-1 macrophages suggested that the needle-shaped CaCO3 particles trigger a pro-inflammatory response. In contrast, no pro-inflammatory response was induced in undifferentiated THP-1 monocytes exposed to either needle- or cuboidal-shaped CaCO3 particles, probably because of their low phagocytic activity. We also found that phosphate-coated particles efficiently repressed cellular uptake and the resulting pro-inflammatory response in both THP-1 macrophages and primary peritoneal macrophages. Our results indicate that the pro-inflammatory response of macrophages upon exposure to CaCO3 particles is shape- and surface property-dependent, and is mediated by the intracellular accumulation of calcium ions released from phagocytosed CaCO3 particles.
•Needle-shaped CaCO3 particles are phagocytized by macrophages.•Needle-shaped CaCO3 particles induce intracellular accumulation of calcium ions.•Needle-shaped CaCO3 particles induce pro-inflammatory responses.•Surface-coating with phosphate decreases adverse effects on macrophages.
The type of bacteria, bacterial cell concentration, initial urea concentration, reaction temperature, the initial Ca
2+ concentration, ionic strength, and the pH of the media are some factors that ...control the activity of the urease enzyme, and may have a significant impact on microbial carbonate precipitation (MCP). Factorial experiments were designed based on these factors to determine the optimum conditions that take into consideration economic advantage while at the same time giving quality results.
Sporosarcina pasteurii strain ATCC 11859 was used at constant temperature (25
°C) and ionic strength with varying amounts of urea, Ca
2+, and bacterial cell concentration. The results indicate that the rate of ureolysis (
k
urea) increases with bacterial cell concentration, and the bacterial cell concentration had a greater influence on
k
urea than initial urea concentration. At 25
mM Ca
2+ concentration, increasing bacterial cell concentration from 10
6 to 10
8
cells
mL
−1 increased the CaCO
3 precipitated and CO
2 sequestrated by over 30%. However, when the Ca
2+ concentration was increased 10-fold to 250
mM Ca
2+, the amount of CaCO
3 precipitated and CO
2 sequestrated increased by over 100% irrespective of initial urea concentration. Consequently, the optimum conditions for MCP under our experimental conditions were 666
mM urea and 250
mM Ca
2+ at 2.3
×
10
8
cells
mL
−1 bacterial cell concentration. However, a greater CaCO
3 deposition is achievable with higher concentrations of urea, Ca
2+, and bacterial cells so long as the respective quantities are within their economic advantage. X-ray Diffraction, Scanning Electron Microscopy and Energy Dispersive X-ray analyzes confirmed that the precipitate formed was CaCO
3 and composed of predominantly calcite crystals with little vaterite crystals.
Liquid marbles have recently attracted much interest in various scientific fields because of their isolated environment and robustness. However, conventional liquid marbles lack a reliable heating ...mechanism, which is critical in many potential applications. Here, the development of iron oxide (Fe
O
) nanocube-coated liquid marbles (iNLMs), which can be homogeneously heated with an alternating magnetic field (AMF) to as high as 86 °C, is reported. Through tuning the power of the AMF, the iNLMs canbe heated to desired temperatures in controllable patterns. Furthermore, multicenter and selective heating is realized based on the unique magnetothermal properties of iNLMs. As heatable miniature reactors, the iNLMs are further demonstrated to facilitate the kinetic study of temperature-dependent chemical reactions. DNA amplification is successfully performed in liquid marbles, achieving a 25% superior amplification rate compared with that in a common thermal cycler. These results confirm the feasibility of coating liquid marbles with Fe
O
nanocubes to form delicate magnetothermal miniature reactors, which provides a reliable method of applying liquid marbles in areas such as biosensor technology, point-of-care testing, and theranostics.
The growing biomedical challenges impose the continuous development of novel platforms. Ensuring the biocompatibility of drug delivery and implantable biomedical devices is an essential requirement. ...Calcium carbonate (CaCO3) in the form of vaterite nanoparticles is a promising platform, which has demonstrated distinctive optical and biochemical properties, including high porosity and metastability. In this study, the biocompatibility of differently shaped CaCO3 vaterite particles (toroids, ellipsoids, and spheroids) are evaluated by bacterial toxicity mode-of-action with a whole-cell biosensor. Different Escherichia coli (E. coli) strains were used in the bioluminescent assay, including cytotoxicity, genotoxicity and quorum-sensing. Firstly, both scanning electron microscopy (SEM) and fluorescence microscopy characterizations were conducted. Bacterial cell death and aggregates were observed only in the highest tested concentration of the vaterite particles, especially in toroids 15–25 µm. After, the bioluminescent bacterial panel was exposed to the vaterite particles, and their bioluminescent signal reflected their toxicity mode-of-action. The vaterite particles resulted in an induction factor (IF > 1) on the bacterial panel, which was higher after exposure to the toroids (1.557 ≤ IF ≤ 2.271) and ellipsoids particles (1.712 ≤ IF ≤ 2.018), as compared to the spheroids particles (1.134 ≤ IF ≤ 1.494), in all the tested bacterial strains. Furthermore, the vaterite particles did not affect the viability of the bacterial cells. The bacterial monitoring demonstrated the biofriendly nature of especially spheroids vaterite nanoparticles.
Display omitted
•Biocompatibility of vaterite particles (toroids, ellipsoids, and spheroids).•Bacterial panel sensitive to cytotoxicity, genotoxicity, and quorum-sensing.•Cell death and aggregates were observed only in the highest particles concentration.•Induction factor (IF > 1) after exposure to the toroids and ellipsoids particles.•Demonstrated the biofriendly nature of especially spheroids vaterite nanoparticles.
Crystalline biominerals do not resemble faceted crystals. Current explanations for this property involve formation via amorphous phases. Using X-ray absorption near-edge structure (XANES) ...spectroscopy and photoelectron emission microscopy (PEEM), here we examine forming spicules in embryos of Strongylocentrotus purpuratus sea urchins, and observe a sequence of three mineral phases: hydrated amorphous calcium carbonate (ACC · H₂O)→ dehydrated amorphous calcium carbonate (ACC) → calcite. Unexpectedly, we find ACC · H₂O-rich nanoparticles that persist after the surrounding mineral has dehydrated and crystallized. Protein matrix components occluded within the mineral must inhibit ACC · H₂O dehydration. We devised an in vitro, also using XANES-PEEM, assay to identify spicule proteins that may play a role in stabilizing various mineral phases, and found that the most abundant occluded matrix protein in the sea urchin spicules, SM50, stabilizes ACC · H₂O in vitro.
Concrete cracks must be repaired promptly in order to prevent structural damage and to prolong the structural life of the building (or other such construction). Biological self-healing concrete is a ...recent alternative technology involving the biochemical reaction of microbial induced calcium carbonate precipitation (MICP). This study determined the most appropriate technique to encapsulate spores of Bacillus sphaericus LMG 22257 with sodium alginate so as to protect the bacterial spores during the concrete mixing and hardening period. Three techniques (extrusion, spray drying and freeze drying) to encapsulate the bacterial spores with sodium alginate were evaluated. The freeze-drying process provided the highest bacterial spore survival rate (100%), while the extruded and spray-dried processes had a lower spore survival rate of 93.8% and 79.9%, respectively. To investigate the viability of microencapsulated spores after being mixed with mortar, the decomposed urea analysis was conducted. The results revealed that the freeze-dried spores also showed the highest level of urea decomposition (metabolic activity assay used as a surrogate marker of spore germination and vegetative cell viability). Thus, the self-healing performance of concrete mixed with freeze-dried spores was evaluated. The results showed that the crack healing ratio observed from the mortar specimens with freeze-dried microencapsulated spores were significantly higher than those without bacteria. This study revealed that freeze drying has a high potential as a microencapsulation technique for application to self-healing concrete technology.
Cd(II) pollution in water will cause serious threats to the environment and human health. The general remediation protocol for Cd(II) pollution by hydroxide (Ca(OH).sub.2 or NaOH) is still faced with ...filtering difficulties and high effluent pH. To develop an applicable method for the Cd(II) removal in water, we prepared an activated calcium carbonate (CaCO.sub.3) material by changing the crystallinity, particle size, and surface activity of CaCO.sub.3, and investigated the corresponding Cd(II) removal capacity from aqueous solutions. The results showed that more than 99.9% of Cd(II) was removed within 10 min in an initial concentration of 50 mg L.sup.-1. Moreover, the effluent pH is close to neutral after removal of Cd(II), and the sediment is filtered well. Comparative experiments and characterizations have demonstrated that the excellent Cd(II) removal performance of activated CaCO.sub.3 is due to the mechanical activation changes the surface activity of the original stable CaCO.sub.3, promotes the slow-release dissolution equilibrium of the active carbonate groups, and thus the coprecipitation of cadmium hydroxide and cadmium carbonate on CaCO.sub.3 particles. This research demonstrates that mechanical activation of CaCO.sub.3 could be used as a repair material for efficient removal of heavy metal pollution in water, which can solve the problems of filtration and high effluent pH of alkaline precipitation.